The second hand of the watch chronograph cannot be zero, what is the reason why the big second hand

When the chronograph seconds hand is reset and is not aligned with 12 o'clock, it can be adjusted manually: (this method is recommended for most models, for special watches, it is recommended to check the watch manual).

1. First of all, pull out the watch handle at 3 o'clock, and gently pull out a grid to adjust the time.

2. Press the button at 2 o'clock, press the big second hand to jump one square, and keep pressing to let the big second hand jump clockwise to the 12 o'clock position.

3. Then press the button at 5 o'clock to determine the reset.

4. Finally, look at the minute hand indication, twist the watch handle at 3 o'clock, adjust the minute hand to the correct time position, and then press the watch handle.

Once these operations are complete, you can start the timing at 2 o'clock, stop the timer, and then reset it at 5 o'clock to see if the big seconds hand is reset to 12 o'clock.

The second hand of the watch chronograph cannot be reset to zero, which may be caused by the following reasons:

1.Battery issues: If the watch battery dies, the second hand will stop somewhere and will not return to zero. At this point, the battery needs to be replaced to ensure that the watch is working properly.

2.Wear of the second hand gear or gimbal: Wear of the second hand gear or gimbal, which can also cause the second hand not to zero. In this case, you will need to send your watch to a repair service center for repair. If the gimbal is damaged, the part may need to be replaced.

3.Interference by strong magnetic fields: Prolonged exposure of the watch to a strong magnetic field can magnetize the components in the movement, causing the second hand to not return to zero. The solution is to take the watch to a repair point for demagnetization.

In addition, the second hand of the watch chronograph cannot be zero, which may also be related to the blockage of the second hand, movement failure, abnormal wear, and magnetization of the watch. If this happens to your watch, it is advisable to send it to a professional watch repair shop for diagnosis and repair as soon as possible.

Generally speaking, the three-eye gauge reference position is to pull out a small gear in the middle, that is, when the date is adjusted, and then press the upper right or lower right twist to correct the table is not the same as the table, go to the counter, or look at the manual to correct the part of the reference position, it is very easy to solve.

If you encounter this kind of problem, there are usually two possibilities:

OneIf it's a machine, it may not be energetic, but it's good to be on it often.

IIIf it's an electronic watch, it's probably a Tissot watch.

If there is no power, try to change the battery to see, if it has just been replaced or there is a problem, it is that your Tissot watch may have been spent, it is recommended to send it to the world famous watch.

The customer center went to see if the Tissot watch was flooded.

Solution:

If it is quartz, some large seconds are not gone, the general three-eyed chronograph hand Tissot watch usually has a long second hand does not go, only the timing goes, a small plate in the three small plates has been walking is the second hand of the time, this is a power-saving design, most of the chronograph Tissot watches are like this, please see the manual for details.

If it's a mechanical watch.

The time error is relatively large, and there is no quartz watch.

Accurate. It is recommended to swing the Tissot watch horizontally from side to side for about 10 minutes before putting it down at night to replenish the winding and ensure normal time.

A fully automatic watch is self-winding by the swing of the arm, so it must be worn for at least 12 hours a day to ensure accurate timekeeping.

In the dial, the small hand goes, and the second hand doesn't go.

1. The basic power required for insufficient power is undoubtedly a quartz watch, so if you find that the second hand of the quartz watch does not move, you can change the battery and try it. 2. The word winding is generally related to mechanical watches, and usually fully automatic mechanical watches are to be wound manually, so if you find that the second hand does not move, try to wind it. 3. The loosening of the second hand itself is also one of the reasons why the second hand cannot walk, this phenomenon usually occurs after the movement, because of the violent shaking, the gear inside the second hand may be loose, which causes the phenomenon that the second hand does not go.

If it doesn't work, you can only send it over for repair. You first confirm for yourself whether only the second hand does not go, the others are normal, if everything else is normal, it is estimated that it is stuck in the winding.

First, find the reset button of your Tissot watch and then follow the steps below to reset the seconds hand.

1. Rotate the middle watch handle downward, twist to a certain extent, you can pull it out, when you pull out a section, press the upper button to adjust the parking position of the short yellow needle for 1 10 seconds. When you pull out a section, you can adjust it by pressing the yellow horse watch seconds hand with the length of the knob at the bottom.

2. Then when the middle watch handle is pulled out of the second section, press the button above to adjust the short yellow hand of the 30-minute chronograph. Adjust everything to the top.

3. After adjustment, you must remember to press the middle watch handle into two grids, and then rotate it in and tighten it.

PS: If the reset is not successful, you can try a few more times or let the second hand stop in another position.

Dear Kiss I am happy to answer this question for you, the second hand of the watch does not go, you can do it according to the following methods: 1. Whether it is because the second hand is loose. Gently swing the watch from side to side, if the second hand swings with the second hand to loosen, you can go to the after-sales collapse to tighten the second hand. 2. Whether it is because the watch movement is damaged or parts fall off.

If this is the case, send the watch to a professional after-sales service for repair. 3. Whether it is because of insufficient power. Charge the watch to see if the second hand is active, if it is not cracked, it means that the power is insufficient, if not, send it to the after-sales service.

4. When the power is insufficient, it is easy to cause a delay in time, thereby delaying time. If it is a problem with the movement, it is very likely that other parts of the movement are damaged or the gears are stuck because the parts are not removed. If there is a problem with the watch, just deal with it in time.

Summary. Hello, glad to be able to your question. This is because the drive shaft connecting the minute hand is broken, so that the rotation of the second hand cannot be transmitted to the minute and hour hands, and the hour and minute hands will not go. It is recommended that you go to the after-sales service for repair.

The second hand of the watch is moving, but the minute and hour hands are not gone, what is going on?

Hello, I am Mr. Xiao Wang, I am very happy to be able to ask your question, please be patient and wait for a while, I am helping you answer I will reply to you in five minutes, please wait a while.

Hello minute hand go hour hand does not go what's going on, newly bought watch.

Hello, glad to be able to your question. This is because the drive shaft connecting the minute hand is broken, so that the rotation of the second hand cannot be transmitted to the minute and hour hands, and the hour and minute hands will not go. It is recommended that you go to the after-sales service for repair.

Would it be nice to go to the place where the watch was repaired?

Speak. Don't you say a word?

That's right, sorry ha, I've got you covered.

Go to another repair shop, it's easy to repair.

You need to go to the after-sales service, it will be within the warranty period, the warranty, go to other stores in addition to the need for money can be repaired.

The watch movement is damaged. If this is the case, send the watch to a professional after-sales service for repair.

Charge the watch to see if the second hand can move, if it can move, it means that the power is insufficient, if not, send it to the after-sales service, when the power is insufficient, it will cause a delay in time, thus delaying time. If it is a problem with the movement, it is very likely that other parts of the movement will be damaged or the gears will be stuck if the parts are not taken out in time. If there is a problem with the watch, just deal with it in time.