Seiko watches The needle that keeps the time can t go back to the original point after it is cleared

Pull the crown to the second square, that is, the outermost time adjustment grid, press and hold the button at the two o'clock position for 2 seconds, at this time the small minute hand of the chronograph stopwatch will turn around, let go and press the button again for 2 seconds, then the second hand will turn around, and then you can press the button at the 4 o'clock position to fine-tune, press and go for a second, press and hold for a fast walk, until it returns to the 12 o'clock position.

Take my watch, for example: three heel hands for chronographs. First pull out the knob of the time adjustment in the middle of the two, press the button corresponding to the dial 2, one of the three needles used for timing will move a circle, who moves, means that the next thing that can be adjusted is the hand, at this time press the button corresponding to the dial 4 to adjust, until the needle is zero; Then press the button corresponding to the disc 2, the other needle in the three needles will move a circle, adjust according to the appeal method to know that the three needles are zero, and press the time adjustment knob can be used normally.

1. First of all, we make sure that there is a button up and down, and a middle one.

2. We completely pull out the middle pull head until the watch is in a stopped state.

3. Press and hold the upper and lower buttons at the same time for more than 3 seconds, we will find that the "hour" hand of the timekeeping will turn, and then release the two buttons, indicating that we can now adjust the "hour" hand to the position we want, and the adjustment method is to press the above key to adjust.

4. Then press and hold the upper and lower buttons at the same time for more than 3 seconds, we will find that the "1 20 seconds" hand of the timing will turn, and then release the two buttons, indicating that we can now adjust the "1 20 seconds" hand to the position we want, and the adjustment method is to press the above key to adjust.

5, and then press and hold the upper and lower buttons at the same time for more than 3 seconds, we will find that the "second" hand of the timing turns, and then release the two buttons, indicating that we can now adjust the "second" hand to the position we want, and the adjustment method is to press the above key to adjust.

After all the adjustments are made, push the middle head to make the watch work normally.

It should be stuck or there is a problem with the mechanical components, it is recommended to find a professional watch repairer to help you see the ......

If you buy a brand new Seiko watch and the watch does not run the time, it may be caused by the following reasons:1The battery is not installed properly or is low on power.

You can try replacing your watch's battery or having your watch checked by a professional repair shop. 2.The watch is set to stop.

A certain Seiko watch has a stop function that may stop the watch to prolong battery life. You can check the watch manual to learn how to cancel the stop state. 3.

The watch movement is faulty. If your watch is still not working properly, it may be due to a malfunction in the movement. In this case, you will need to take your watch to a specialist repair shop for inspection and repair.

If you are not sure what is wrong with your watch, it is recommended that you take your watch to an officially authorized repair center for inspection and repair. These repair centers will have professional technicians and equipment to provide you with the best service.

If you buy a new Seiko watch that doesn't run time, there are a few possible reasons:1The battery is already out of power, and the battery life of a new watch is usually relatively long, generally 2 to 3 years, but there are also cases where the battery is low due to the grinding energy.

If your watch is not moving, you can try to replace the battery first. 2.If the watch doesn't set the time accurately, it could be that you didn't adjust the time correctly.

If you are not sure how to adjust the watch time, you can refer to the watch's instruction manual or consult the after-sales service staff in the store. 3.There are burrs or impurities inside the movementSometimes, some impurities may remain in the production process of the watch, which may affect the normal operation of the watch and cause the watch to not run time.

If this is the case, you can seek professional repair services. 4.There are other faults in the watchThe watch may have other faults, such as failure of the parts of the bridge part of the movement, broken energy storage spring, etc.

In this case, it is best to take the watch to a professional technician for repair.

Summary. Hello dear, happy to answer your <>

If your new Seiko watch doesn't run time, you can try to troubleshoot it by doing the following:1Check that the battery has run out and replace it if so.

2.Check if the strap is loose, a loose strap will cause the battery and the movement to lose electrical contact, please secure the strap. 3.

Try restarting the watch, taking out the spring stem of the movement and pressing it back again, this will help the watch to restart. 4.Check whether the waterproof performance of the watch is damaged, if there is water ingress that may affect the operation of the movement, please send it to a professional watch repair shop as soon as possible for inspection.

If the above operations do not solve the problem, please seek the help of a professional watch repair service center for a more effective solution. <>

Seiko watches new watches why not go to time.

I bought a new watch, how mechanical watches don't go.

Dear, hello, and the ride is happy to answer your <>

If your new Seiko watch doesn't run time, you can try to troubleshoot it by doing the following:1Check that the battery has run out and replace it if so.

2.Check whether the strap is loose, the loose strap will cause the battery and the movement to lose the balance and make electrical contact, please fix the strap. 3.

Try restarting the watch, taking out the spring stem of the movement and pressing it back again, this will help the watch to restart. 4.Check whether the waterproof performance of the watch is damaged, if there is water that may affect the movement work, please send it to a professional watch repair shop as soon as possible for inspection.

If the above operations do not solve the problem, please seek the help of a professional watch repair service center for a more effective solution. <>

It is a mechanical watch. There is no water ingress.

Here are some <> related extensions that we hope you will find helpful

If your new mechanical watch doesn't go, here are some of the possible reasons for this buried condition:1The watch was not fully wound and therefore did not have enough energy to drive the movement.

Refer to the watch's instruction manual to wind correctly. 2.The movement may stop working due to force or impact during transport or storage, please keep the watch steady and gently tap the dial of the watch to activate the movement.

3.There may be problems with the movement, such as mechanical failure or damage, etc. In this case, you need to send the watch to a professional watch repair center for repair.

4.The watch may have been discontinued because the watch segment is obsolete or damaged and cannot be repaired. In this case, you will need to consider replacing your watch or finding an appropriate repair service for additional check-ups and diagnostics from a center.

If this does not work, consider taking your watch to a dedicated watch repair center for a more correct troubleshooting. <>

Summary. Seiko mechanical watch does not go, it may be a collision. Because watches are high-precision products, they need to be carefully stored in order to get the best results.

Excessive collisions must be minimized, with special care not falling on hard objects. Normal collisions caused by sports such as tennis or golf will not affect the watch, but users of the Twin Seiko series (high-precision products) must take off their watch while engaging in such sports to avoid damaging the product.

Hello dear <>

You are welcome to consult me, I am honored to meet you. Now I see that the waiter has asked you to ask for the question, Yu Tanqing I will give you the answer, please wait a while, and Qing will serve you immediately.

Seiko mechanical watch does not go, it may be a collision. Because watches are high-precision products, they need to be carefully stored in order to get the best results. Excessive collisions must be minimized, with special care not falling on hard objects.

Normal collisions caused by sports such as tennis or golf will not affect the person who changes the Twin Seiko watch, but users of the Twin Seiko series (high-precision products) must remove their watch while engaged in such sports to avoid damaging the product.

I hope this service can help you, you can click on my avatar to follow me, and if you have related questions in the future, you can ask me questions again, and give me a thumbs up after the end of the consultation with a convenient guess Finally, I wish you a happy life! <>

Flowers cracked old forest].