How to make styrofoam with plasticine, how to make styrofoam without glue without plasticine

Make styrofoam out of plasticine:1. First of all, we put the plasticine into the container, and then add the liquid glue.

2. Then add a little of this glycerin.

3. Add the transparent bath gel again.

4. Add some more hand sanitizer.

5. Add some small black dots.

6. Add your favorite pigment and stir it well.

7. Then add borax water to form.

8. After it becomes transparent, it can be foamed, and the foaming has been foaming, and then the foaming is almost the same.

If you don't have plasticine, prepare glue, shower gel, facial cleanser, dish soap, soap flowers, and then melt these things with hot water, shake them into foam and add them together, and finally add a little borax water to form them, and turn them into bubbling mud to play. In the absence of borax water, baking soda can be used instead, as well as saturated salt water and saturated laundry detergent, but the success rate is not high.

The steps to make styrofoam with plasticine are as follows:1. Prepare a piece of plasticine and drop a few drops of dish soap on the plasticine.

2. Rub the plasticine together with dish soap.

3. Put it in the box and let it stand for a while.

4. Take out the semi-finished styrofoam.

5. Pull the styrofoam to foam.

6. Pull for a while to complete.

The method of making styrofoam from plasticine is as follows:

1. Take a piece of plasticine and put it in a bowl, the size is appropriate, the proportion should be even, poke with a spoon stirring spoon, and stir.

2. At this time, you can add some hand sanitizer to the plasticine in the bowl, continue to stir, and produce a lot of foam.

3. At this time, you should add some shaving foam to the bowl, the amount should be appropriate, not too much, you can add it multiple times, and keep stirring at the same time.

<>5. Finally, poke with your hand, it feels very soft and elastic, so that the styrofoam is completed.

How to pinch roses with plasticine

1. First take out a sticky clay stick and stick the pinched clay petals to the stick.

2. To make the first layer of petals, take 2 colored clay balls, press them flat and press them into the shape of petals, and then fix them on both sides of the flower center.

3. The second layer of petals also takes out 3 colored clay balls, flattens and presses the shape of the petals, because the petals of the second layer will be larger, so they should be curled.

4. Take out a medium-sized clay ball from the third layer of petals, press it flat and pinch it into the shape of petals, because the petals are larger, so this time you have to roll 3.

5. In the end, it is made into a complete rose.

withPlasticineThe specific steps to make styrofoam are as follows:

Tools: eraser, dish soap1. Prepare a piece of plasticine and drop a few drops of dish soap on the plasticine.

2. Rub the plasticine together with dish soap.

3. Put it in the box and let it stand for a while.

4. Take out the semi-finished styrofoam.

5. Pull the styrofoam to foam.

6. Pull for a while to complete.

7. The finished product is as follows.

The method of using plasticine to make foaming glue without glue is as follows:Preparation materials Tools: dough, hand sanitizer, water, coloring.

1. First of all, add Fengzhou into a colored clay in the silver container, and then add water to melt.

2. After it melts into a sedan car, add the pigment that you like the color.

3. Add hand sanitizer and stir it well.

4. Then add and continue to stir the foam to know the shape, if it is not enough, add it again.

5. Then stir and stir all the time, it will take a while.

6. After stirring and molding, you can get started, so that the styrofoam will be successful.

Prepare the material that is easy to bubble and put it in the bowl, add some stationery glue, stir the prepared material into a uniform foam, stir out a large amount of foam, and then add the plasticine to continue stirring, and finally the stirring is completed. Prepare a mixing bowl, mixing spoon, plasticine, stationery glue, shower gel, water. Add a small amount of water to the shower gel and stir it in the mixing bowl to make a foam, when the stirring foam is more, put the glue into the bowl and continue to stir with a stirring spoon, and stir until there is more foam, put the plasticine inside, pay attention to the plasticine when putting the plasticine to a small amount of times, put the plasticine into it and stir it all the time, add some water to it in an appropriate amount, and finally stir evenly after it is completed.

Plasticine is a unique style of playing, plasticine is easy and convenient to make by hand. In the production, the operation of the left and right hands at the same time can also adjust the thinking and balance the intellectual development of the left and right brains.

The type of development to today, the material and process of plasticine have changed a lot, unlike before, can not be mixed, can not be reused, and is relatively rough and hard, the upgraded version of the plasticine is called "colored clay", and then the high-end is called "ultra-light clay" is representative of "oak mud".

There are two types of plasticine: industrial plasticine and ordinary plasticine where children play.

Industrial plasticine.

It is a plasticine-like mud that is used in industry and has a wide range of uses.

Features: High-grade colored clay is non-toxic, environmentally friendly, mainly used for handicrafts, hardware, plastic molding, student sculpture, recyclable, long-term non-deterioration.

Oil clay - a new type of plasticine.

This type of plasticine is mainly made of calcium carbonate and other raw materials, liquid paraffin wax as an oily component, and glycerin, which can be used by young children, children and related personnel to practice making ceramic handicrafts.

Features: 1. It does not contain preservatives, and is used as an oily ingredient in liquid paraffin, which is non-toxic and odorless, and safe to use.

2. There will be almost no evaporation and drying at room temperature, so it has good long-term stability.

3. It is easy to process, and the bamboo knife is not sticky when used at high temperature, and it does not stick to the hands.

4. Adding metal soap, etc., can not only improve the affinity of inorganic fillers and oil components, but also improve the viscosity of oil clay.

5. Liquid paraffin wax is added to the oil composition, which can improve the plasticity of oil clay.

UsesPlasticine is used as a learning tool for young children. For example, in the teaching process of learning pinyin, let the children use plasticine to pinch the letters, with a variety of colors of plasticine into letters, let the children like which color to pinch which color, the children learn very fast. Through this method, the children not only learned to make hands-on, but also learned the content of the textbook, which really killed two birds with one stone, and also reflected the teaching concept of playing and playing.

Hello dear, first of all, take a piece of plasticine and put it in a bowl, the size is appropriate, the proportion should be even, poke with a spoon of stirring spoon, ready to mix and stir, secondly, you can add some hand sanitizer to the plasticine in the bowl, continue to stir, produce a lot of foam, be careful not to get too much in, or pay attention to the ratio, even, third, then add some shaving foam to the bowl, the amount should be appropriate, not too much, you can add it multiple times, while stirring constantly, fourth, Continue to stir with your hands at high speed until more foam is produced, be careful not to get out of the bowl, and finally poke with your hands until it feels soft and elastic, indicating that the styrofoam has been made.

Question: Why can't my mom get fat?

Why is my essay the same as every word of my grandfather's?

Plasticine is made of calcium carbonate and other raw materials as fillers, liquid paraffin wax as oily ingredients, and glycerin, vinegar can wash off calcium carbonate and other fillers, oil can wash off oily ingredients such as paraffin, and finally if there are oil stains, dish soap should be used. This way it can be removed.

1.Take materials and tools.

2.Take a basin and plasticine.

3.Put the plasticine in a basin and add dish soap.

4.Finish.

Summary. Dear, I'm happy to answer your questions<>

How to make styrofoam with plasticine is as follows: 1. Prepare a piece of plasticine, drop a few drops of dish soap on the plasticine 2. Rub the plasticine and dish soap together. 3. Put it in the box and let it stand for a while.

4. Take out the semi-finished styrofoam. 5. Pull the styrofoam to foam. 6. Pull for a while to complete.

Styrofoam is a kind of entertainment product, which has the characteristics of softness and foaming.

How to make styrofoam from plasticine.

Dear, I'm happy to answer your questions<>

How to use plasticine to make styrofoam is as follows: 1. Prepare a piece of plasticine, drop a few drops of dish soap on the plasticine 2. Rub the eraser and the pre-banquet mud and dish soap together to clear up. 3. Put it in the box and let it stand for a while.

4. Take out the semi-finished styrofoam. 5. Pull the styrofoam to foam. 6. Pull for a while to complete.

Styrofoam is a kind of entertainment product, which has the characteristics of softness and foaming.

Kiss, <>

The predecessor of plasticine, plasticine has been a favorite toy for children since it was introduced in 1956. At first, the plaguten came in a gray and white color, but in the following years, the plasticine took on a variety of colors and scents. These include glow-in-the-dark, golden, silver, shampoo, shaved water, and more.

The steps to make styrofoam from plasticine are as follows:Tools: plasticine, dish soap, box.

1. Prepare a piece of plasticine and drop a few drops of dish soap on the plasticine.

2. Rub the plasticine and dish soap in a balance mold.

3. Put it in the box and let it stand for a while.

4. Take out the semi-finished styrofoam.

5. Pull the styrofoam to foam.

6. Pull and slow down for a while to complete.

The steps are as follows: First, take a piece of plasticine and put it in a bowl, the size is appropriate, the proportion should be even, poke with a spoon mixing spoon, and prepare the spring round for mixing and stirring.

Secondly, you can add some hand sanitizer to the plasticine in the bowl, continue to stir, produce a lot of foam, be careful not to get too much in, or pay attention to the ratio, evenly.

Third, add some shaving foam to the bowl, adding the right amount, not too much, you can add it in multiple batches, while stirring constantly.

Fifth, after poking and poking with your hand, it feels very soft and elastic, which means that the foaming rubber has been made.

The finished product is as follows. <>