How to make styrofoam without glue and borax

Styrofoam is a handmade product that many people like, it is relatively simple to make, and it is very durable and fun, but when we make styrofoam, it is easy to make styrofoam too hard.

Tools Raw materials.

Styrofoam. Method steps.

5 6 Step by Step Reading.

In the production process of styrofoam, the proportion needs to be reasonably adjusted in order to be able to produce a suitable soft and hard styrofoam toy, and the ratio of water and glue is very important when making.

When making styrofoam, try to keep the ratio of water and glue to about 1:2 for the first time, and at the same time, when stirring in the later stage, you need to adjust the ratio according to the situation.

Then we add the material with foaming effect, stir, roughly after the completion of the rabbit borax water for the final solidification treatment, at this time if the styrofoam is hard, you can add additional water.

When stirring, add water and glue according to the situation, you can adjust its softness and hardness, if it becomes relatively dry, it is best to add some glycerin to ensure that it is more comfortable to play.

After playing with the styrofoam for a long time, due to the natural evaporation and loss of water, it will gradually harden, at this time we can add glue, glycerin and other materials to rub it to make it softer.

In addition, we can add cotton and other materials to knead, so that the cotton and styrofoam are completely integrated, thereby increasing the softness of the styrofoam, but the cotton is best added at the end, the cotton as a whole is easy to absorb ash, and it is often thrown away after playing for about a week after joining.

The more you play, the bigger the styrofoam is how to do without borax.

The more you play, the bigger the styrofoam.

This shampoo is really very mini, then add a little self-glue, and finally squeeze in a little hand soap, adjust your favorite color. Komaru purple is added pink, stir them thoroughly, evenly, and finally add shaving foam, you can add a little more shaving foam.

Next, stir them well to make them look like they're whipped up cream. Add the cleansing water in small amounts and many times while stirring, and when it reaches this viscous shape, our mud is almost ready.

The finished mud is very soft when pressed with a spoon, and it will not get on your hands at all. The stretchability is not too good.

And then we're going to take a little box and put the mud in it. You can see that it is just a small box of mud, let's try it by foaming.

1. Styrofoam needs to be reasonably adjusted in the production process to produce styrofoam toys with suitable hardness and softness.

2. When making, the ratio of water and glue is very important, and the ratio of water and glue should be kept at about 1:2 as much as possible.

3. At the same time, when stirring in the later stage, it is necessary to adjust the proportion according to the situation, add materials with foaming effect for stirring, and add borax water for final solidification treatment after roughly completion.

4. At this time, if the styrofoam is hard, you can add additional water, add water and glue according to the situation when stirring, you can adjust the softness and hardness, if it is relatively dry, it is best to add some glycerin to ensure that it is more comfortable to play.

Styrofoam is a kind of entertainment product, which has the characteristics of softness and foaming.

The practice is very simple borax-free glue-free styrofoam tutorial,

Make mud out of 2 materials at home? Turning into Leo styrofoam in seconds, the sound of bubbles is invincible and decompressed! Borax-free.

Call you a fun mud practice. Prepare materials: toothpaste, laundry detergent. Add a little more toothpaste, then cover the toothpaste with laundry detergent and stir until formed. Come on! Give it a try.

Laundry detergent plus dish soap and toothpaste can do the trick.

Styrofoam can be made with ultra-light clay and shaving foam.

Place the ultra-light clay in a container, add water to the container in small amounts and many times, stirring with a spoon until the clay blends with the water, then pour in an appropriate amount of dish soap and start stirring, stirring into a paste. Then add a large amount of shaving foam, continue to stir and fuse, and the crystallization of the last thing is styrofoam.

Styrofoam is a kind of entertainment product, its main ingredients are glycerin, water, borax, this product has the characteristics of soft, love foaming and so on. There are many people in life who like to make styrofoam, this is because styrofoam is very easy to make, and it is very fun after making things, and it is something that many children like.

Uses of styrofoam

Pinch to decompress. Styrofoam is a kind of entertainment product, mainly made of glycerin, water, borax, etc., with the characteristics of softness and foaming. Styrofoam is played by taking out the styrofoam first, then gently pressing it with your fingers, then pulling it with both hands to soften it like ramen.

Styrofoam glue is mainly made of glue and Rong Zhuhong mu easy to bubble care solution plus some borax, because the fluidity is better, and the color after adding pigment is also more beautiful, so it is more popular with young people, and it will make people feel more relaxed in the process of pinching styrofoam, so some people will also use it to decompress.

Summary. Pro, prepare: laundry detergent, snowflake mud, ultra-light clay.

2. First of all, prepare a glass of water. 3. Then, add laundry detergent. 4. Then stir the laundry detergent well.

5. Then, take the ultra-light clay and snowflake mud. 6. Mix the two evenly and put them in a bowl. 7. Add the laundry detergent water you just prepared.

8. Mix well, so that the alabaster and ultra-light clay will become gelatinous. 9. Pour the gelatinous mixture directly onto the table and rub it with your hands. 10. In the end, the foam production was successful.

Hello, I am Life Answerer Pepsi Know-it-all k2, I have served 4060 people, I am happy to serve you, and the teacher is answering for you.

Pro, use borax water to make styrofoam without glue Method: 1Preparation:

Laundry detergent, snow mud, super balance guess light clay. Paragraph Calendar 2First, prepare a glass of water.

3.Then, add the laundry grip search powder. 4.

Then stir the laundry detergent to combine.

Pro, prepare: laundry detergent, snowflake mud, ultra-light clay. 2. First of all, prepare a glass of water.

3. Then, add laundry detergent. 4. Then stir the laundry detergent well. 5. Then, take the ultra-light clay and snowflake mud.

6. Mix the two evenly to prevent trapping, and put them in a bowl. 7. Add the laundry detergent water you just prepared. 8. Mix well, so that the alabaster and ultra-light clay will become gelatinous.

9. Pour the gelatinous mixture directly onto the table and rub it with your hands. 10. In the end, the foam production was successful.

Add an appropriate amount of liquid glue and white glue to the container. Add a little more dish soap and stir well. Add some shaving foam and your favorite pigment. Finally, add a little borax water and knead until formed. <

1. Add an appropriate amount of liquid glue to the container to dig hunger and liquid disperse white glue.

2. Add a little more dish soap and stir well.

3. Add some shaving foam and your favorite pigment.

4. Finally, add a little borax water and knead it to form the spring solstice.

Prepare ultra-light clay, add water to dissolve, then add glue, pigment, starch, shaving foam, stir to foam, then prepare a container, pour a small amount of glycerin, a large amount of shaving foam, and then add water and glue in a ratio of 1:2 and stir, add a small amount of borax water and stir many times during the stirring process until the styrofoam is completed.

Styrofoam is a kind of entertainment product, mainly made of glycerin, water, borax, it has the characteristics of soft, foaming and so on. The styrofoam production method can be divided into four steps, firstly, glue and a small amount of glycerin are poured into the container; Then add the shaving foam; Then add water and stir, the water stall hand and glue are 1:2;Finally, add a small amount of borax water several times, stirring as you go.

Chenguang glue (Deli glue) water container: shaving soaking borax potato pure water glycerin method Steps: Pour Deli glue (Chenguang glue) and a small amount of glycerin into the container. Then add the shaving foam;

Then add the water and stir, the water and glue are 1:2. Add a small amount of borax water and stir while adding.

Pay attention not to add too much water and glycerin, and add a small amount many times during the production process. Styrofoam can be used as a stress relief tool or as a toy. It is not toxic when used by children, but it cannot be used as an edible toy, that is, it will be toxic if consumed.

Styrofoam is mainly made into toys for children to play with. It is mainly used during play, but if children eat it by mistake, it will still cause toxic symptoms.

To make borax-free with styrofoam, you need to mix the melted clay and glue to make styrofoam, and then add plain color and a small amount of starch to stir evenly to make borax-free. You can also pour glycerin and an appropriate proportion of water and glue into it, and then add borax water and stir it well, you can also make borax-free.

To make non-jumping sand with styrofoam, you need to prepare ultra-light clay, buried foam, glue, chromoprecin, starch and other items. You need to pour a small amount of water on top of the ultra-light clay to let the ultra-light clay melt gradually. Add glue, pigment and a small amount of starch to it, stir them well, and you're done.

You can also pour a small amount of glycerin into the basin, mix the 1:2 ratio of water and glue into it to make styrofoam, and then pour a small amount of borax water, stir them well until the foam glue is made, and you can complete the production of borax-free.

It should be noted that no matter which method is used to make borax-free, the dosage of water and glycerin must be strictly controlled during the production process.

Add an appropriate amount of liquid glue and white glue to the container. Add dish soap and stir well. Add shaving foam and pigment. Add a little borax water and knead until formed. <

1. Add an appropriate amount of liquid glue and white glue to the container.

2. Add a little more dish soap and stir well.

3. Add some shaving foam and your favorite pigment.

4. Finally, add a little borax water and knead until formed.