How to make styrofoam at home, how? Make styrofoam from home materials.

The styrofoam is made as follows:

Prepare water and glue in a ratio of 1:1 (you can add a little pigment to the glue). Pour the prepared ingredients into a bowl.

Pour in a little cleansing water (to prevent sticky hands). Use a tool to stir the ingredients in the bowl well. Add an appropriate amount of glycerin during the stirring process (to prevent the prepared styrofoam from becoming brittle).

Add a small amount of fairy water several times until the solution is no longer in a dilute state. Remove the thickened lump and stretch your hands constantly. Rub in layers until your hands are no longer sticky.

Note: Do not add too much water to glycerin during the making process, do not add too much. Add too much styrofoam to make it too brittle.

Add a certain proportion of water, glue and materials with foaming effect, carry out solidification treatment, adjust its softness and hardness, and rub it repeatedly, so that the foaming glue is ready.

Tools Material: water, glue, borax.

Method- When making styrofoam, try to keep the ratio of water to glue about 1:2 for the first time, and then we add the material with foaming effect and stir. After roughly finishing, borax can be added for the final solidification treatment, at which point if the styrofoam is hard, additional water can be added.

When stirring, add water and glue according to the situation to adjust its softness and hardness. If it gets dry, it's a good idea to add some glycerin to make it comfortable to play with. After playing with the styrofoam for a long time, due to the natural evaporation and loss of water, it will gradually harden, at this time we can add glue, glycerin and other materials to rub it to make it softer.

In addition, we can add cotton and other materials to knead, so that the cotton and styrofoam are completely integrated, so as to increase the softness of the styrofoam.

Method 2: You can choose, liquid glue + shower gel + shampoo + glycerin + molding water or liquid glue + facial cleanser + foaming hand sanitizer stock solution + glycerin + molding water, the effect of this method is also very good.

Precautions: Be careful not to let the glue get on your hands during the process; Be careful not to eat.

Now more and more babies like to play styrofoam, but don't know how to do it, now the vegetable bag will tell you!

First put a piece of clay into the container, add hot water that has just submerged it, knead the clay, then put in the shaving foam, knead it, (at this time the clay has become thin), and finally add molding water and knead it!

Isn't it simple? The handicapped party will also, with the materials at home, come and do it.

How to make styrofoam?

1.Pour a small half cup of glue into a glass and add a small amount of pure glycerin.

2.Squeeze in the shaving foam, which adds a super brushing effect to the styrofoam.

3.Using chopsticks, stir the glue, glycerin, and shaving foam in the cup until well mixed.

4.Add a small amount of borax water many times, stir while adding until molding, and test the extensibility of the bubble glue by hand after molding. Summary.

1.Pour in a small half cup of glue and add a small amount of pure glycerin.

2.Shaving foam can add a super brushing effect to styrofoam.

3.Whisk the glue, glycerin, and shaving foam in the cup until well combined.

4.Add borax water in small quantities and many times.

First of all, prepare the following 3 materials: white gum, aloe vera gel, borax water, ps: If you can't remember, you can collect or comment, so that you don't get lost.

The steps are as follows: the first step: first add white glue, the amount of white glue 90% determines the size of the finished product, can not pour more or less! Novice babies should pay attention, the white glue on the market, there are many patterns, and ** up and down fluctuates greatly, there are very cheap, there are also very expensive, although the mud made may be thrown away after playing a few times, but remember, you can't choose too inferior white glue, otherwise you can't make a good mud, not to mention, the ingredients contained in it, may also endanger your health!

So what does a bad white gum look like? The texture of bad white gum will be too thin, and it will contain impurities, small sugar cubes are deeply affected, this novice babies must pay attention to the selection of quality and ** similar white gum, which is also very helpful for making a fun mud!

Step 2: In fact, this step can be ignored, can be added or not, there are many babies ask small sugar cubes, what is the role of this step?

Actually, this step really doesn't have much effect, it won't affect the finished product later, but it will make the mud more perfect! The meaning of "perfect" in this is to make the finished product have a certain particularity, give an example to the friends, for example, someone made a mud that can repel mosquitoes, which is added to the "flower water", and someone made a fragrant cement, then it is added to the "perfume", so the same can be obtained, the mud with hand cream is added to the hand protection when playing, are you still satisfied with this explanation?

Step 3: Add an appropriate amount of aloe vera gel, this thing can be of great use, and these things added today, all have the effect of "hand care", friends should also pay attention to hand care when playing with mud, aloe vera gel replaces the traditional shower gel, hand sanitizer, will the effect be better? Let's look forward to it!

Step 4: Add the appropriate amount of borax water, for novice babies, the amount of borax water is the most difficult to grasp, adding too much, will make the final product too hard, too little will make the mud too thin, so the amount of borax water has always been the most difficult place for novice babies to master, here small sugar cubes to give you a little trick, is to add a small amount! What is "a little more"?

It means that you can add borax water little by little at a time, and then slowly according to your own feelings, like a little harder mud, you can add a little more, like a little less, you can add a little less, little by little, not to be too ruthless at one time, this is the same reason as noodles, I don't tell her about ordinary people!

In the end, the finished product appeared, and the novice baby must pay attention to the fact that the last step should be controlled when adding borax water, and the first step, the amount of white glue should be controlled, so that the simple and fun "styrofoam" will be made!

Glue, dish soap, laundry detergent, containers, spoons.

Pour an appropriate amount of glue into the container. Add some dish soap and laundry detergent respectively. Then use the prepared spoon to stir the ingredients well, and finally the styrofoam is ready, which is very fun and very simple.

Use the existing materials at home to make styrofoam, don't worry about the materials and play more and more, no borax DIY

A bowl of water, a bottle of clear glue and white glue Borax (soapy water if you don't have one) Shaving foam (Daddy's shaving bubbles, or use home shower gel and so on to quickly stir into foam).

Pour some egg whites into a container, add dish soap, and stir constantly.

1.Pour liquid glue into a container and add a small amount of glycerin and shaving foam.

2.Add water, the ratio of water to glue is 1:2.

3.Finally, add a small amount of borax water several times, stirring while adding.

The styrofoam becomes a little too much after adding water, but it is a little stickier than before.

Styrofoam will be mixed with some toothpaste.

Step 1:

Prepare materials, glycerin, water, molding water, clay.

Put the clay in the water and stir until it is paste.

Step 2: Add a little glycerol drops and you're good to go. Add an appropriate amount of molding water, stir well and then you can play, it will be a little sticky.

Next, I will teach you how to make molding water.

Start by scraping some soap with a ruler and then add water. Close the lid tightly, shake it, and you're good to go.

Precautions: Molding water should be added in small quantities and many times. Wash your hands after playing with styrofoam. Children under 5 years of age should not play and should not be edible.

Tools Ingredients: Chenguang glue (Deli glue), water, container, shaving foam, borax water, glycerin.

Method steps.

1) Pour Deli glue (Chenguang glue) and a small amount of glycerin into the container.

2) Then add the shaving foam.

3) Then add water and stir, the ratio of water to glue is 1:2.

4) Add borax water in small quantities and stir as you go.

3. Precautions.

Don't add too much glycerin and don't add too much water.

2. Use 2 kinds of materials to make styrofoam.

Styrofoam made with 1 material is more basic, so it may work better with 2 materials to make styrofoam.

1. The proportion of styrofoam needs to be reasonably adjusted in the production process, so as to be able to make suitable soft and hard styrofoam toys.

2. When making foaming glue, the ratio of water and glue is very important, and the ratio of water and glue should be kept at about 1:2 as much as possible.

3. When stirring in the later stage, it is necessary to adjust the proportion according to the situation, add materials with foaming effect for stirring, and after the general completion, you can add borax water for final solidification treatment.

4. At this time, if the styrofoam is hard, you can add a little extra water to it. When stirring, add water and glue according to the actual situation to adjust the softness and hardness of the foaming glue. If the styrofoam is relatively dry, it is best to add some glycerin to ensure that it is more comfortable to play with later.

Materials required: appropriate amount of toothpaste, appropriate amount of facial cleanser, appropriate amount of water, appropriate amount of glue.

1. Squeeze an appropriate amount of toothpaste into a small bowl.

3. Add water and stir.

4. Pour into a box with a lid.

5. Put in an appropriate amount of facial cleanser.

6. Shake the box.

7. Pour back into a small bowl after foaming.

8. Add glue and stir well.

9. Turn it into a solid form.

502 glue dish soap, mix with water.