What flowers are suitable for firewood ash, and what flowers are suitable for plant ash?

Charcoal ash is a good material for raising flowers, it can help cuttings take root faster, and it can also prevent the appearance of stagnant water. It can be used not only for soil-grown plants, but also for hydroponic plants, which can play a role in sterilization and antiseptic.

Charcoal ash can be used to breed many kinds of flowers, and the plants that are often used are pothos, jasmine, yueji, orchid, and junzi orchid. If it is used to raise flowers, the effect is very good. When using, it is necessary to sift out some charcoal blocks with relatively large particles, and it is best to use them after breaking them with a tool.

If there are conditions at home, it is best to grind it into powder.

Flower growers know that plant ash is a good fertilizer for raising flowers, it is green and ecological, cheap and easy to obtain, and can help our flowers and plants grow well. In fact, there are many benefits of plant ash flower cultivation, and there are many things you don't know, so let's take a look

Promote budding and rooting.

After we sow the seeds of flowers and plants, we can cover the potting soil with a thin layer of plant ash, which can speed up the germination rate of the seeds, let the seeds germinate early, and also increase the moisture of the soil, the effect is obvious. It is also possible to mix some plant ash in the new potting soil after cuttings and transplanting, which can promote rooting as soon as possible.

Prevent wound infection.

After pruning the diseased and rotting branches, or after treating the plants with rotten roots, we can apply some plant ash to the wound, which can effectively prevent further infection and rot, and can also promote wound healing.

Prevent leaf loss. In the growth period of flowers and plants, the plant ash is diluted and filtered with water and sprayed on the plants, which can promote the photosynthesis of plant leaves, enhance the growth of leaves, and effectively prevent plants from falling leaves.

Cold-resistant and warm. In winter, the weather is cold, we need to keep the flowers and plants warm and increase their cold resistance, at this time, you can fill a circle of plant ash in the potting soil, and then cover the grass ash with a layer of soil, which can effectively prevent frostbite of plant roots.

Potassium supplementation. Grass ash contains potassium needed for flower growth, and the fertilizer efficiency is much better than ordinary commercially available potassium fertilizer. Adding some plant ash to the potting soil can provide the plants with plenty of potassium, making the flowers more colorful, and the fruits bigger and sweeter for the fruit-bearing plants.

Prevent root rot. When we usually water flowers, we will inevitably slip our hands and water a lot, which is simply a disaster for some plants that do not like water. We can add some plant ash to the surface of the potting soil or soil, and the plant ash can absorb part of the water and effectively prevent the pot from accumulating water and rotting the roots.

Prevention of pests and diseases.

Grass ash can effectively prevent plants from being infested by pests and diseases, and effectively prevent the occurrence of anthracnose and powdery mildew. Spraying some plant ash dilution on the plant can also effectively repel red spiders, aphids, etc.

1. Grass ash is alkaline, so the flowers suitable for using plant ash are relatively alkaline tolerant plants. Flowers and plants such as acacia, red willow, pearl plum, imitation potato spring, Lingxiao, wolfberry, tung tree, torch tree, begonia, black locust, tamarix, seaside mallow, red leaf cherry, Canadian purple-leaved bauhinia, cactus, red leaf heather and other flowers and plants can be fattened with plant ash.

2. Grass ash is the ash after the plant is burned, which is weakly alkaline, so some acid-loving flowers and plants are not very suitable, so some flowers that prefer an alkaline environment in the family are very suitable, and the cactus, hibiscus flowers and spring flowers that are most commonly seen on weekdays are more suitable for use. So don't use plant ash for flowers and plants indiscriminately, if you use it wrong, you are harming potted plants.

3. Grass ash contains a large amount of potassium soluble in water, which is a good fast-acting fertilizer, which can be used in the early stage of growth of most plants, because potassium fertilizer can not only promote the growth of flowers and plants, but also increase and strengthen its own immunity, so that the growth state of plants is more healthy.

Grass ash is more suitable for raising some flowers that tolerate alkaline soil, such as clematis socks, pomegranates, cacti, succulents, yueji, hibiscus and so on.

Because the plant ash is the ash after the plant is burned, it is weakly alkaline, so some acid-loving flowers and plants are not very suitable, so some flowers in the family that prefer an alkaline environment are very suitable, and the cactus, hibiscus and spring flowers that are most commonly seen on weekdays are more suitable for use. So don't use plant ash for flowers and plants indiscriminately, if you use it wrong, it will harm the potted plant before the disaster.

Grass ash contains a large amount of potassium that is soluble in water, which is a good fast-acting fertilizer, which can be used in the early stage of the growth of most plants, because potassium fertilizer can not only promote the growth of flowers and plants, but also enhance their own immunity and make the plant growth state more healthy.

How to use plant ash

1. Fertilization

Grass ash is a very good potash fertilizer, and when used properly, some acid-loving plants can also be used appropriately. At the beginning of plant growth, it is generally covered with plant ash, which can promote the germination rate of seeds. However, the amount of plant ash should not be too much, otherwise it will be easy to burn the roots.

2. Insecticide

In addition to being rich in potassium, plant ash is also a very good bactericidal substance for plants. Because plant ash can achieve the effect of sterilization, wrapping plant ash on the wound of the plant can not only promote wound healing, but also kill some bacteria and pests. Especially when the roots of the plant rot, applying plant ash can achieve a good relief effect.

1. What flowers can be raised.

Charcoal ash can cultivate a variety of flowers, such as pothos, jasmine, rose, orchid, junzi orchid, etc. When used to grow flowers, the effect is very good. When using, you need to sieve out some of the larger particles of charcoal, and it is best to crush them with a tool before use. If there are conditions at home, it is better to grind it into powder.

Second, what is the role?

1.Waterproof: When raising flowers, you may encounter deep pots.

In this case, it can be placed at the bottom of the pot to avoid the phenomenon of rotten roots caused by stagnant water. 2.Promotes rooting:

Ideal for use when cuttings. It can be put into the potting soil of cuttings, which can help the branches to take root as soon as possible, and the survival rate will be higher. 3.

Sterilization and antiseptic: It can be used for both soil culture and hydroponics. After breaking the charcoal, put it in a vase with water and put it in small pieces.

This would be a good way to disinfect and prevent root rot. However, it is important to change the water frequently.

Smoke ash is suitable for raising crab claw orchid, gardenia, carnation, camellia wildflower, rhododendron, junzi orchid, spider plant, camellia, gardenia, Milan flower, begonia flower, jasmine, moon flower, lilac and other flower plants. Soot contains a lot of acidic substances, these substances have great benefits for the growth of flowers, and soot is also a fertilizer, very suitable for raising flowers, if you want to use soot to breed flowers, you can breed some flowers that like particularly acidic soil.

Soot contains a large number of acidic substances, these substances have great benefits for the growth of flowers, and soot is also a kind of fertilizer, very suitable for raising flowers, if you want to use soot to breed flowers, you can breed some flowers that like particularly acidic soil, adding soot to the soil of raising flowers, can promote the absorption of nutrients by flowers, can also adjust the pH of the soil, and can also sterilize and disinfect flowers.

What plants are suitable for soot.

Cigarette ash is suitable for raising crab claw orchid, gardenia, carnation, camellia, peach blossom, tiger song and landtail orchid, aloe vera, pothos, azalea, pothos, junzi orchid, spider plant, camellia, gardenia, Milan flower, begonia flower, jasmine, moon flower, lilac and other plants.

Precautions for soot maintenance.

Use soot to raise flowers and cover the lack of cover to use the appropriate amount, do not use too much soot to raise flowers, so as not to cause poor growth of flowers due to too high acidity, use soot to raise flowers need to add soot to water, and water is fully mixed and then added to the soil for raising flowers is better.

Grass ash is the main potassium fertilizer, and it contains more calcium, but it is often alkaline, so it can not be applied to acid-loving flowers, and it is more suitable for alkali-loving flowers, such as caryophyllus, geranium, rose, tamarix, purple locust, ash and various vegetables. In addition, plant ash is also suitable for raising neutral flowers, which do not have strict requirements for soil pH, as long as the amount is not much, such as tulips, hyacinths, ruixiang, daffodils, calendula and most other flowers.

1. Production method: As the name suggests, grass ash is some ash obtained by cooling after some straws and leaves are completely burned, which is gray-white, which has the effect of supplementing potassium fertilizer for plants, improving plant resistance, and preventing diseases and insects.

2. How to use: Grass ash can be mixed with soil as base fertilizer, or sprinkled on the surface of the soil as top dressing, if you want to prevent insects, use plant ash to sprinkle a circle around the plant, a thin layer on the line.

3. Application time: If the soil is mixed as base fertilizer, it should be applied in spring and autumn when the pot is changed. If you do top dressing, it is generally applied before the low temperature every year, that is, in late autumn, and fertilization at this time can improve the cold resistance of the plant. If it is for insect control, it can be applied at any time.