-
This certificate is valid nationwide. In addition, according to the regulations, you can only apply three years after graduating from the bachelor's degree. You are signing up now in violation of the law. But in case you sign up, as long as you pass, you can sign up. The card period is the card at the time of registration, not the card at the time of registration.
-
The examination registration work is generally carried out from April to May of the previous year, and the time of the 2012 safety engineer qualification examination is determined to be September.
The Registered Safety Engineer Examination is divided into four subjects, namely: "Safety Production Law and Related Legal Knowledge", "Safety Production Management Knowledge", "Safety Production Technology" and "Safety Production Accident Case Analysis".
-
Good evening, dear! 1. Application conditions for registered safety engineers (all subjects) 1. Have a college degree in safety engineering and related majors, and have been engaged in safety production business for 5 years; Or have a college degree in other majors, and have been engaged in safety production business for 7 years. 2. Have a bachelor's degree in safety engineering and related majors, and have been engaged in safety production business for 3 years; or have a bachelor's degree in other majors, and have been engaged in safety production business for at least 5 years.
3. Have a second bachelor's degree in safety engineering and related majors, and have been engaged in safety production business for more than 2 years; or have a second bachelor's degree in other majors, and have been engaged in safety production business for at least 3 years. 4. Have a master's degree in safety engineering and related majors, and have been engaged in safety production business for 1 year; or have a master's degree in other majors, and have been engaged in safety production business for at least 2 years. 5. Have a doctorate degree and have been engaged in safety production business for 1 year.
6. After obtaining the professional qualification of junior registered safety engineer, he has been engaged in safety production business for 3 years.
-
The examination subjects of the registered safety engineer are four subjects: "Safety Production Laws and Regulations", "Safety Production Management", "Safety Production Technology Basics", and "Safety Production Professional Practice". Among them, professional practice is divided into seven subjects:1
Construction Safety 2chemical safety; 3.coal mine safety; 4.
metallic and non-metallic mines; 5.metal smelting safety; 6.road transport safety; 7.
Other security. The content and difficulty of the four subjects are different. The passing standard for each subject is 60 out of the full mark in the paper
1. Safety production laws and regulations: examination time: hours Multiple choice questions: 70 multiple choice questions: 15 questions and 100 points; The examination of this subject mainly assesses the relevant basic knowledge and the corresponding legal knowledge, and the question types are mainly single-choice and multiple-choice.
2. Safety production management: examination time: hours Multiple choice questions: 70 multiple choice questions: 15 questions and 100 points; It is mainly to test some basic knowledge of safety production management, mainly with multiple-choice questions and multiple-choice questions.
70 multiple-choice questions: 15 questions worth 100 points; The main test is the comprehensive application of some production technologies, mainly multiple-choice questions and multiple-choice questions. Single-choice questions are mandatory, while multiple-choice questions can be used in any group.
-
The registration time has not yet come out, but it is estimated that it will be in May! The examination will be held from September 8th to 9th, and four subjects will be examined: knowledge of safety production law and related laws, knowledge of safety production management, safety production technology and case analysis of safety production accidents.
-
Registration in June, examination in September, test safety production law and related legal knowledge, safety production management knowledge, safety production technology and safety production accident case analysis.
-
The safety engineer examination consists of four subjects: "Safety Production Laws and Regulations", "Safety Production Management", "Safety Production Technology Basics" and "Safety Production Professional Practice", and the examination is difficult.
There are 4 subjects in the safety engineer examination, which are "Safety Production Technology", "Safety Production Law and Related Legal Knowledge", "Safety Production Management Knowledge", and "Safety Production Case Analysis".
Safety Production Technology" is relatively easy, and the content seems to be the most, but there are many common sense and basic contents, which are intuitive, and it is relatively easy to judge in the exam.
Work Safety Law and Related Legal Knowledge", it should be familiar with the textbook, and the part of the outline that requires mastery, familiarity, and understanding must be read through the whole Senxun department, and it must be targeted when reading the book.
"Safety Production Management Knowledge" has a lot of content, and new statistical principles have been added, but these contents are relatively general, and sometimes it is necessary to consult relevant books to obtain complete information.
Case Analysis of Work Safety Accidents seems to be relatively easy, but there is a lot of content that needs to be memorized, and it is very important to review this course and be familiar with relevant laws, regulations, and standards.
First of all, the preparation for the safety engineer exam must be based on the textbook and outline, some people have read a lot of reference materials, but in fact, the cart is turned upside down. First of all, it is necessary to understand the requirements of the syllabus, and secondly, it is necessary to carefully and carefully study the content of the textbook, think about it, understand and memorize it.
Secondly, everyone should have an overall concept and not separate the test subjects. They are actually a whole, the theoretical knowledge that a registered safety engineer should master. Many of the Chang-type content in the four subjects are intersecting, so everyone must review it as an organic whole when studying.
Finally, don't memorize when studying, because the question type of the exam is multiple-choice questions, except for case analysis, which is mainly subjective, the other three subjects are objective questions, and the relevant information in the options is given. It mainly depends on whether the knowledge points are understood and mastered, and the emphasis is on understanding, as long as you review carefully, you can pass the test.
-
The Certified Safety Engineer exam is certainly difficult, but it is not so difficult compared to one construction and one construction. However, if you review well during the preparation period and do a good job of the knowledge of the test points required for the exam, it is not a problem to get the certificate in one fell swoop.
The safety engineer exam has a certain degree of difficulty, not only will test some basic concepts, but also test some more professional skills, involving a wide range of exams, many candidates are prone to bias in the face of the exam, so it will lead to a relatively low pass rate.
However, compared with the first-level constructor and the first-level cost engineer, these exams are relatively easy to test, and there are many subjects for safety engineers, and there are more knowledge points that need to be memorized. If the candidate has less experience in safety management and does not have much contact with this aspect, he may invest relatively more.
Registered safety engineers only have one opportunity to take the exam once a year, and the exam time in 2022 is October, with "Safety Production Laws and Regulations" and "Safety Production Management" on the 29th, and "Safety Production Technology Basics" and "Safety Production Professional Practices" on the 30th.
The exam registration time is generally two months before the exam, the exam can be directly applied for by candidates, how to learn personally feel difficult, you can participate in the training class to study, and finally take the exam at the same time.
A total of four subjects are required for the exam, and a pass of 60 points in each subject is required to obtain the certificate. The deadline for each exam is about one month before the exam, but candidates generally start to register about two months before the exam.
-
1. Obtained a technical secondary school degree in safety engineering and engineering economics, and has been engaged in safety production related business for seven years.
2. Or obtain technical secondary school degree in other majors, and have been engaged in safety production related business for nine years.
3. Obtain a college degree in safety engineering and engineering economics, and have been engaged in safety production related business for five years. Or obtain a college degree in other majors, and have been engaged in safety production related business for seven years.
4. Obtain a bachelor's degree in safety engineering and engineering economics, and have been engaged in safety production business for three years. Or obtain a bachelor's degree in other majors, and have been engaged in safety production related business for five years.
-
Registered safety engineer is one of the national vocational qualification certificates, with high gold content and workplace competitiveness. The following is an introduction to the information and process of the Certified Safety Engineer exam.
1. The content of the registered safety engineer examination.
The Certified Safety Engineer exam mainly involves knowledge of safety management, safety technology, and laws and regulations. Among them, safety management includes safety management principles, safety organization and management, safety evaluation and safety emergency management, etc.; Safety technology includes safety technology foundation, safety monitoring and safety prevention, etc.; Laws and regulations include safety laws and regulations, safety standards and safety specifications, etc.
Second, the process of the registered safety engineer examination.
Qualification review: After the candidates submit the registration materials, the provincial human resources and social security department will conduct a qualification review to determine the eligible candidates.
Examination arrangement: After the candidates pass the review, the provincial human resources and social security department will notify the candidates to take the exam, and inform the exam time, place and exam content.
Examination: The Certified Safety Engineer exam is a computer-based exam, which consists of two parts: written test and computer-based operation. The written test mainly examines the candidate's theoretical knowledge, and the computer operation mainly examines the candidate's practical ability.
Examination results: After the examination, the provincial human resources and social security department will announce the examination results.
3. Suggestions for the review of the Registered Safety Engineer Exam.
Fully understand the content and format of the exam, and clarify the direction and focus of revision.
Read relevant laws, regulations and standards, and master the basic principles and methods of safety management and safety technology.
Earnestly study the practical application cases of safety management and safety technology, and understand the actual operation process of safety engineering.
Make a reasonable review plan, review in stages and subjects, and regularly check your learning progress and effect.
Do more mock tests and real questions to test your learning results and exam level.
In conclusion, the Certified Safety Engineer exam is an exam that requires careful preparation and comprehensive review, and requires candidates to have certain knowledge of safety management and safety technology and practical skills. Candidates should carefully formulate a review plan, pay attention to the combination of theory and practice, and do more mock tests and real questions to improve their examination level and professionalism.
I am the security division, working in a state-owned enterprise, now there are only about 4,000, the unit does not attach great importance to it, the most important thing is "a construction, bidding division", the safety assessor is different, in any enterprise to be a cow.
The examination subjects are divided into four subjects, namely: "Work Safety Law and Related Legal Knowledge", "Work Safety Management Knowledge", "Work Safety Technology" and "Work Safety Accident Case Analysis". >>>More
The Registered Safety Engineer Examination is divided into four subjects, namely: "Safety Production Law and Related Legal Knowledge", "Safety Production Management Knowledge", "Safety Production Technology" and "Safety Production Accident Case Analysis".
Personally, I think the order of difficulty is: management, technology, practice, and regulations.
There are four subjects in the Certified Safety Engineer exam. >>>More