Can the non load bearing walls of the new house decoration be smashed? 20

Updated on home 2024-07-17
20 answers
  1. Anonymous users2024-02-12

    It is best not to move if the property is not allowed to be smashed, otherwise the consequences of affecting the stability of the whole building need to be borne by you, not the main load-bearing wall.

    It also belongs to the secondary load-bearing wall, generally this kind of wall is best not to smash, otherwise in case of an accident, this responsibility can not be shirked, in addition to someone upstairs to report complaints, the property will also personally go to the scene to stop.

  2. Anonymous users2024-02-11

    1.First of all, make sure that it must be a non-load-bearing wall so that it can be operated.

    2.For non-load-bearing walls, in your interior, they can generally be smashed!

    3.Some non-load-bearing walls, which are exterior walls, are performed outdoors, and this property will definitely not agree, for example, I smashed a piece of the non-load-bearing exterior wall and installed windows, so the property will definitely not agree!

    Finally, you can learn from the decoration style of the people in the same building as you, and you must reach an agreement with the property when you smash the wall!

  3. Anonymous users2024-02-10

    It can be smashed, but the property must agree.

  4. Anonymous users2024-02-09

    If there is a balcony outside, it can be done, it does not affect the aesthetics, if there is no balcony, it can also be smashed without affecting the force result, but it affects the aesthetics, and the property will not allow it.

  5. Anonymous users2024-02-08

    Non-load-bearing walls for home decoration cannot be dismantled at will.

    Introduction to non-load-bearing wall structures:

    The so-called non-load-bearing wall refers to the house composed of reinforced concrete column array frame, the floor slab is supported by a horizontal and vertical array, the array is supported by columns, and the columns are supported by the foundation. This structure is usually seen indoors with column arrays. Most of the walls between the columns are filled with hollow bricks or ordinary bricks, which are generally non-load-bearing walls.

    The load-bearing capacity of a non-load-bearing wall.

    Compared with load-bearing walls, non-load-bearing walls are secondary load-bearing components, but at the same time they are extremely important supports for load-bearing walls. It has to bear at least two parts of the load, one part is the self-weight of the wall, taking a six-story house as an example, the non-load-bearing wall in the ground floor house has to bear the weight of the upper five layers of the wall.

    On the other hand, structurally speaking, non-load-bearing walls are usually seismic walls by design. That is, if ** occurs, these non-load-bearing walls will be subjected to ** forces along with the load-bearing walls.

    Demolition of non-load-bearing walls.

    Consequences of dismantling non-load-bearing walls at will:

    For a family, removing the non-load-bearing wall or making a hole in the wall is not too much of a problem, but if the residents of the entire building are randomly demolishing and altering the non-load-bearing wall, it will greatly reduce the seismic resistance of the building. According to experts, the load-bearing walls of some rooms can be removed, and the half-brick walls in the bathroom can be removed if the support beams supporting the walls are designed in the floor structure, otherwise they cannot be removed.

    But be careful not to damage the waterproof layer, otherwise it will have to be redone. Although the brick wall connecting the balcony is not a load-bearing wall in terms of structure, it is generally thicker and has a certain load-bearing effect on the balcony, so it is best not to demolish it, especially for old houses. In other words, only half-brick walls or lightweight walls can be demolished directly, otherwise, they must be demolished with the consent of the property department.

    The removal of non-load-bearing walls may lead to consequential changes to water, heating, and electrical circuitry, so these issues should be considered in the design. If the owner's decoration design has plans to demolish the wall, then the decoration company must submit an application to the property department in advance, and the construction can only start after approval. Because when the building is completed, the design unit will leave a drawing for the property management company, on which the thickness and material of various walls such as load-bearing walls and non-load-bearing walls are clearly marked.

    Based on the drawings, the utility company can determine which walls can be demolished and which ones cannot be demolished.

  6. Anonymous users2024-02-07

    If the load-bearing wall is smashed in the decoration house, a fine of not less than 500 yuan but not more than 1,000 yuan will be imposed on the decorator, and a fine of not less than 1,000 yuan but not more than 10,000 yuan will be imposed on the decoration enterprise.

    If the design plan is not put forward by the original design unit or the design unit with the corresponding qualification level, the design standard is exceeded without authorization, or the floor load is increased by the standard, the decorator shall be fined not less than 500 yuan but not more than 1,000 yuan, and the decoration enterprise shall be fined between 1,000 yuan and 10,000 yuan.

    If the decoration enterprise violates the relevant national safety production regulations and safety production technical regulations, does not take necessary safety protection and fire protection measures in accordance with the regulations, and does not take measures to eliminate the hidden dangers of construction safety accidents, the construction administrative department shall order corrections and impose a fine of 1,000 yuan to 10,000 yuan or less; where the circumstances are serious, order a suspension of business for rectification and impose a concurrent fine of between 10,000 and 30,000 RMB; If a major safety accident is caused, the qualification level shall be lowered or the qualification certificate shall be revoked.

    Legal basis] Administrative Measures for Residential Interior Decoration and Decoration

    Article 5 Residential interior decoration activities prohibit the following acts:

    A) without the original design unit or the design unit with the corresponding qualification level to put forward the design plan, change the main body of the building and load-bearing structure;

    2) Changing rooms or balconies without waterproof requirements into bathrooms and kitchens;

    3) Expand the size of the original doors and windows on the load-bearing wall, and remove the brick and concrete walls connecting the balconies;

    4) Damage the original energy-saving facilities of the house and reduce the energy-saving effect;

    5) Other behaviors that affect the safety of building structure and use.

    The main body of the building in these measures refers to the structural structure of the building entity, including roofs, floors, beams, columns, supports, walls, connecting joints and foundations. The load-bearing structure referred to in these measures refers to the main structural components and its connecting joints that are directly transmitted to the foundation with its own weight and various applied forces, including load-bearing walls, poles, columns, frame columns, piers, floors, beams, benches and roof trusses, suspension cables, etc.

  7. Anonymous users2024-02-06

    Of course, you can smash non-load-bearing walls, as long as you're not afraid to flatten the house into a pancake! (Just kidding, kidding, don't take it seriously!) )

    One of the most common renovation problems is the removal of non-load-bearing walls. For this type of wall, we need to clarify some concepts:

    1.Load-bearing walls: Load-bearing walls are an important part of the structure of a house and play the role of bearing the loads on the floor slabs and floors. Generally speaking, load-bearing walls are pre-designed by architects and cannot be smashed or altered at will.

    2.Non-load-bearing walls: Compared with load-bearing walls, non-load-bearing walls only bear their own weight and some local loads, but not the load of the entire house structure. As a result, non-load-bearing walls can be smashed or rebuilt as needed.

    Of course, the smashing of non-load-bearing walls still needs to be analyzed on a case-by-case basis. Before proceeding with this step, it is important to consult a professional decorator and confirm that the wall is not load-bearing and will not affect the stability of other structures.

    Is the decoration knowledge too professional? If you are worried that you are pretending to be wrong and taking a detour, it is better to find a company with a good conscience to help you. Here it is recommended that you use the Tuba Rabbit one-stop decoration platform, according to the needs and budget of the owners, free matching of 4 local companies, the company PK owners first look at the plan and then make a decision:

    Click here to intelligently match 4 local companies for free].

    Kunming - [Kunming Decoration Strategy Guide].

    Suzhou - [Suzhou Decoration Strategy Guide].

    Hefei - [Hefei Decoration Strategy Guide].

    Fuzhou - [Fuzhou Decoration Strategy Guide].

    Beijing - [Beijing Decoration Strategy Guide].

    Dalian - [Dalian Decoration Strategy Book].

    Hangzhou - [Hangzhou Decoration Strategy Guide].

    Shanghai - [Shanghai Decoration Strategy Guide].

    Tianjin——[Tianjin Decoration Strategy Guide].

  8. Anonymous users2024-02-05

    Not all non-load-bearing walls can be smashed.

    The non-load-bearing building exterior wall is forbidden to be demolished and expanded to expand the door and window openings, and the indoor non-load-bearing wall can be removed in principle, but in the process of decoration design, it is necessary to pay attention to whether it will affect the safety of the house's circuit pipelines, pipeline ventilation, gas distribution and subsequent use when smashed.

  9. Anonymous users2024-02-04

    In principle, the light wall can be smashed, but the following aspects need to be paid attention to, and it is not recommended to smash it:

    1. The wall connected with the ventilation pipe cannot be removed;

    2. There is a distribution box on the wall.

    of non-load-bearing walls.

    The body cannot be dismantled;

    3. The counterweight wall and shear wall of its auxiliary supporting role.

    and so on, and it cannot be dismantled. In principle, the light wall can be smashed, but the following aspects need to be paid attention to, and it is not recommended to smash it: 1. The wall connected to the ventilation pipe cannot be removed; 2. The non-load-bearing wall with a distribution box on the wall cannot be removed; 3. The counterweight wall and shear wall of its auxiliary support role cannot be removed.

    Is it reasonable to deduct the deposit if the non-load-bearing wall is smashed in the renovated house.

    It depends on whether the property has notices or regulations, whether the owner is required to sign a decoration agreement, if there is an agreement, then there is no dispute, according to the agreement, if not, the property is obviously unreasonable, indiscriminate charges! You can find your local housing authority.

    Property Office Complaints!

    Can you play the indoor non-load-bearing wall of a renovated house in Chengdu?

    The load-bearing wall of house decoration cannot be beaten, and the non-load-bearing wall can be played in theory. However, according to the different requirements of each community, the property management regulations are also different. Although some are non-load-bearing walls, they cannot be beaten if they are exterior walls, so the specific situation depends on the actual situation.

    In addition, large-scale wall construction needs to be filed with the housing authority, and if you don't file it, you will be punished.

  10. Anonymous users2024-02-03

    In principle, do not smash the interior walls of the house. Under normal circumstances, the partition wall in the house is a non-load-bearing wall, which plays the role of dividing the functional area, and at the same time takes into account the role of auxiliary load-bearing, shares the pressure of the load-bearing wall to a certain extent, and ensures the stability and solidity of the overall structure. If space is needed, a small area of partial half of the wall can be hollowed out to increase the usable area.

  11. Anonymous users2024-02-02

    It depends on the specific structure of the house, the general brick and concrete structure, if there are many layers above, it is not recommended to smash the wall, even if the door is opened, the beam must be poured and then smashed! If it is a frame structure, that is, a post-installed wall, a frame that is poured first, this kind of shear wall can be smashed except for the shear wall!

  12. Anonymous users2024-02-01

    Yes, non-load-bearing walls can be removed arbitrarily during decoration without affecting the overall structure of the house.

  13. Anonymous users2024-01-31

    It is better not to destroy the structure when decorating the house, if you have to smash the non-load-bearing walls, it is okay, but it does not affect the structure.

  14. Anonymous users2024-01-30

    Can you smash the non-load-bearing walls of a renovated house? If you decorate the house, you have to be well, that location takes up space, and it can be smashed.

  15. Anonymous users2024-01-29

    It is not advisable to smash it because it also has a certain effect on the support of the house.

  16. Anonymous users2024-01-28

    Generally, it is not allowed to tear down the wall, and the property has to pay the decoration deposit in the move-in, which is to prevent the demolition of the wall, and the load-bearing wall must not be moved.

  17. Anonymous users2024-01-27

    If it's not a load-bearing wall, the property is allowed to be demolished.

  18. Anonymous users2024-01-26

    It can be demolished without violating the construction.

  19. Anonymous users2024-01-25

    Ok, let's solve this puzzle step by step!

    First of all, we need to understand what a load-bearing wall is. Load-bearing walls refer to the walls that play a load-bearing role in the building structure, and their design and construction need to be carried out in strict accordance with relevant codes and standards. In the overall load-bearing system of the house, the load-bearing wall is a very important part, which provides stable structural support for the house.

    Secondly, if you are going to knock out a part of the load-bearing wall when you are renovating a new home, it will have an impact on the overall load-bearing of the house. Without professional evaluation and structural design, arbitrary alteration of load-bearing walls may lead to structural instability of the house, which will affect safety. Therefore, for the demolition or renovation of load-bearing walls, it is necessary to consult and commission qualified professional designers or engineers for evaluation and design.

    Finally, for the sake of safety, we strongly recommend that you follow the relevant standards and specifications when renovating your new home, and do not alter the load-bearing walls at will to avoid safety hazards. At the same time, if you do need to remove or renovate load-bearing walls, be sure to seek professional advice and guidance, and follow a professional design plan for construction.

    In conclusion, renovating a new house is a complex project that requires a comprehensive consideration of various factors, including the overall load-bearing capacity of the house. We hope that when you decorate your new house, you can choose professional designers and engineers to ensure the structural safety and stability of the house.

    Is the decoration knowledge too professional? If you are worried that you are pretending to be wrong and taking a detour, it is better to find a company with a good conscience to help you. Here it is recommended that you use the Tuba Rabbit one-stop decoration platform, according to the needs and budget of the owners, free matching of 4 local companies, the company PK owners first look at the plan and then make a decision:

    Click here to intelligently match 4 local companies for free].

  20. Anonymous users2024-01-24

    load-bearing walls. The function is to support the weight of the upper floor, if the load-bearing wall is broken, this will directly affect the structure of the entire building. The load-bearing wall must not be changed at will.

    Otherwise, cracks may appear in the upper floor slab or exterior walls, and as the cracks increase, the floor slab will slowly collapse, and even if it does not collapse, it will reduce the stability and seismic resistance of the house. Since it is said that it is a load-bearing wall, it must have its use, just like every component of the body, and a few teeth have an impact.

    <> load-bearing wall is not allowed to knock off, you can directly find the property, the property can solve this problem, do not consider the danger or not, this can not be agreed, the general property is not allowed to the owner to knock the load-bearing wall, if it is the main beam, the danger is particularly great! After all, concrete is so heavy, if there is no load-bearing, there will be an accident after a long time!

    Load-bearing walls, shear walls.

    It is the pillar of the high-rise building, and when the first comes, ensure that the building is not easy to fall over! Its acts of destruction are unpredictable and irreversible. Some ignorant and fearless owners can decorate how they want, which is already related to the safety of all residents, the seismic level has decreased, and there is a risk of unwarranted floor slab breakage, it is recommended to sue directly.

    in order to obtain a remedy.

    It is best not to hit, once the load-bearing wall is knocked down or damaged, it will have serious consequences, do not think that you can make a claim on some load-bearing walls and then through reinforcement methods such as planting reinforcement and sticking steel to achieve the original load-bearing capacity, the load-bearing wall can not be knocked, even if it is a little thinner, this is the common sense of decoration instructions. If you knock out part of the load-bearing wall, you can't see any harm now, but with the transfer of time, after a few years or even more than ten years, the aging of the wall may affect the safety of the entire building.

    If you want to move the load-bearing wall, it is not an individual who can change it without authorization, unless you have professional qualifications, professional institutions, to re-strengthen and change the whole building, that is okay, but no private person is allowed to change or remove the load-bearing wall without authorization.

Related questions
21 answers2024-07-17

Of course, you can smash non-load-bearing walls, as long as you're not afraid to flatten the house into a pancake! (Just kidding, kidding, don't take it seriously!) ) >>>More

6 answers2024-07-17

load-bearing walls. The load-bearing wall refers to the wall that supports the weight of the upper floor in the masonry structure, which is a black wall on the engineering drawing, and will destroy the entire building structure if it is knocked out; Non-load-bearing wall refers to the partition wall does not support the weight of the upper floor, only plays the role of separating one room from another, and is a hollow wall in the engineering drawing, and whether there is this wall has no big impact on the building structure. >>>More

4 answers2024-07-17

If the building is a commercial housing residential complex in the city. >>>More

4 answers2024-07-17

The ductility of a structure, member, or section refers to the deformation capacity from the beginning of yield to the time when the maximum bearing capacity is reached or after it is reached without a significant decrease in the bearing capacity, that is, ductility is a reflection of the later deformation capacity of the structure, component, or section. >>>More

14 answers2024-07-17

load-bearing walls. The consequences of punching holes in the load-bearing wall can not be moved, and many people know that for the counterweight wall, the demolition will not affect the building structure. >>>More