Is it with or without bait when wild fishing? What s the difference?

The double hook in the water is just a few of the things. Double hook lying on the bottom, one hook lying on the bottom and one hook lightly touching the bottom, one hook floating and one hook lightly touching the bottom, double hook floating. In black pit fishing, the most ideal situation is that one hook floats and one hook touches the bottom.

However, the natural environment of fishing for big fish is complicated, and there are many bottom fish, and the fish news is different, and the fishing drift is not the same. However, it should not be too paused, so it is necessary for everyone to adjust this situation before fishing. The bait used in fishing for large fish can be product bait or insect bait.

There is a large difference between the two ratios, so the fishing is not the same.

With bait drift we should generally fish the layer or fishing float, this kind of fishing method is what is the double hook, bait plus the total weight of the lead sinker and the buoyancy of the float on the water is equal, which stipulates that the size of the bait is the same every time you bait, if the bait is different every time, then the number of screens and meshes of the float will follow the change of the height of the bait, the bait becomes larger, the float fishing mesh is low, or the float all the applications are in, the bait becomes smaller, and the floating fishing mesh is very high on the exposed water surface.

The float is just an object that floats on the surface of the water and can be "suspended fishing" according to the plumb sinker and bait, and the whole process of our fishing is only to carry out fine management of the "pendant" according to the method of adjusting the volume of the float submerged in the water (changing the buoyancy of the water). A float does not have lead, it is poured into the water, and it can only stand up after adding a certain amount of lead to the plumb. We increase the net weight of the sinker again (add tin sinker) so that the float only exposes the upper part of the drift tail, for example, 10 mesh, and then we hang 2 hooks, the float becomes 5 meshes, half water hangs bait on a hook, and the number of meshes of the float screen is reduced again, becoming 2 meshes.

Empty hook semi-water drifting (with hook drift and without bait), the most basic fishing drifting method, are commonly used fishing drifting methods by anglers, can be adjusted according to the fish news, adjusted into a variety of fishing situations, leveling water fishing one eye, adjusting four fishing two, adjusting two fishing two. Specific steps, heavy lead to find the bottom, mark the water level, pull up the float, expose the water surface at a glance, pull down the float a fishing line plus the length of ten centimeters, cut and repair the tin pendant, adjust to the mesh, double hook bait, pull up the float, find the fishing mesh.

Is it with or without bait when wild fishing? What's the difference? Drifting can be divided into two categories: with and without bait, the focus of the two types of drifting methods is different, considering that the bait weight will be very accurate, ignoring the bait weight is still very practical.

In the process of wild fishing, the bait can quickly move the position and quickly form a new nest. In this way, you can get a better catch.

The advantage of the double bait is that the weight of the double bait is considered, and the float can be fished on the float or the bottom, which is a relatively easy and accurate drifting method.

It is more conducive to finding a low and better grasp with bait, of course, you can also adjust the drift without bait, if your mesh is three mesh, you can choose four or five meshes for fishing.

Practical and slow. It is easy to understand the underwater hook bait line condition. The hook lure state is usually the best state for bottom fishing, "one drag, one touch" state.

The sensitivity is appropriate, and it is suitable for fish to swallow undercover and bottom-to-bottom hook bait, which is suitable for most fish conditions. Looking around, most anglers actually use the drifting method of accompaniment, which is basically this general drifting method.

Advantages of the Universal Drifting Method:

1. Simple and convenient and easy to operate. Semi-water empty hook to determine a mesh, and then hang a bait to see, put a long water line to determine the fishing mesh, this method has the advantages of double amble drifting method and single bait leveling water drifting method, but the operation is simpler, convenient, easy to operate. After being proficient, after understanding your own float and hook bait, the basic steps can also be simplified to adjust a certain mesh to fish 2 meshes.

2. On the surface, it is similar to "tune 4 fishing 2", which is completely different from the general so-called "tune 4 fishing 2". A certain mesh may or may not be 4 mesh, which is related to the thickness of the drift tail and the size of the bait; The so-called "tune 4 fishing 2" is out of the thickness of the drifting tail, out of the size of the bait, or out of reality, and there will inevitably be a situation where you can't find and mold to the north and can't find the underwater hook bait line.

The above content reference: Encyclopedia - Air Hook Drifting Method.

The accuracy is different, the accuracy of drifting with hook is relatively high, and the accuracy of drifting without hook is poor, because the hook also has a net weight. The drifting method is different, the hook must first find the bottom, and then wrap the lead skin with the lead skin, and the net weight of the hook must be reserved without the hook to be able to adjust to the tune you want.

The effect is different, the effect of drifting with hook is better and more convenient, because this kind of method has already understood the condition of the bottom of the water when the heavy lead is on the bottom, such as whether there are aquatic weeds, obstructions and the like. If you don't have a hook to adjust the drift, you can't grasp the actual situation of the bottom until you find that the bottom is not suitable after the adjustment, and then go to change the position, which will consume time and nest material.

In fact, it is just the remaining buoyancy of the float, that is, the pull force of the float on the bait. The remaining buoyancy is the buoyancy that remains after the float is balanced with the net weight of the rig. The size of the remaining buoyancy depends on how much you adjust the purpose, for example, adjust the 6 mesh, the remaining buoyancy of the current fishing drift is the buoyancy of the tail of the drift to expose the 6 meshes, in other words, the maximum pull force of the float on the bait is the buoyancy of the 6 mesh.

The size of buoyancy is very related to the volume of the material, for example, most of the floating tails we are floating now are made of carbon fiber or solid glass fiber, if they are compared with the same volume of plastic hollow tails, the buoyancy is definitely not as good as the hollow plastic tails. Therefore, after receiving the energy of the bait as large as a fish, the action of drifting is larger, and the signal we see is naturally very clear.

There are three types of bleaching. The first is to tune the spirit of fishing blunt, when the empty hook is drifting, the tail of the drift is exposed to the surface of the water 5-6 mesh, and then the bait is used in a wild river to observe the floating sinking until 2-3 mesh is exposed, and then the double bait is found to the bottom, until the tail is exposed 2 mesh. The second is to level the water, hang the same amount of lead skin on the double hook, and observe it after throwing it in, and keep it stable according to the cut and repair the lead skin.

The third is the semi-water drift, the first to sink the float, to ensure that the empty hook is not to the end, and then throw it into the water, if it sinks to the bottom of the water must cut off the lead skin, exposed water surface too much must lift the lead skin.

It is more convenient to catch fish with a hook, but it is more convenient to make without a hook. The drift adjustment is an amplitude of fishing, for better fishing.

The biggest difference in point 1 is that you can see whether he is really floating, point 2 can also know whether he can quickly take the bait, and point 3 If you want to adjust, then you can go up and down this transfer.

The way of use is different, the probability of catching a fish is not the same, the main thing is to better determine the specific situation of the bait, choose the right location, and better fishing.

There are many differences between drifting with and without hooking, such as the buoyancy of the water, the net weight, the obstruction and its precise measurement. The hook is used to find the bottom first, wrap the lead seat with a lead skin and then the rock rod, and continue to shift the float until the tip and tail of the float will be flush with the water surface, so that the depth of the water volume can be roughly detected. Then you have to pull down the float, and at the same time increase the length of the fishing line, and keep lifting the rod and cut the lead skin, so that the float can be exposed to the surface of the water.

Finally, hang the bait rock rod, ** float on the exposed water surface for a few eyes.

Rough bottoming: Wrap the lead seat with lead skin, throw it into the fishing position, make sure that the float is not in the water, and then pull the float up until the screen mesh is exposed. Pull down to float:

Generally, it is necessary to pull the length of the 1 height line plus 10-15cm, so that after hanging the double hook, the lower hook is 10-15cm away from the bottom. Trimming the lead skin: Cutting and repairing the lead skin until the number of screens set up by floating and exposed.

Bleaching test: Pull the drifting tail into the water with a rod and check whether it will return to the set screen mesh. Hang double bait:

Pull up and float until the water is adjusted.

Drifting is one of the most important things in a fishing situation, and it has three goals. The first point is to accurately measure the water level, which is usually a certain difference in the fishing method used. The second is to grasp the condition of the fishing hook and bait in the water, taking the double hook as an example, whether it is one hook touching the bottom and one hook lying on the bottom, or two hooks lying on the bottom, or one hook from the bottom and one hook touching the bottom, according to different conditions, you can continue to roll and adjust.

The third is that it is very likely to improve the appetite of the fish, and in the final analysis, the effect of fishing may be to feed a large number of fish, so the same is true for the drift.

The occurrence of the pause is mainly due to the occurrence of the double fish when inhaling the bait, which is a kind of "fish eating" method when the fishing is more dexterous, generally in the case of the bait touching the bottom, the first time the double fish eat the hook to push the fishing group to show the main drift phase.

The skill of adjusting the fishing height and fishing low needs to pay attention to the net weight of the bait, and the double hook can pull the float off a few times after hanging the bait, and be sure to check it a few more times. For example, the empty hook and half water drift is 6 mesh, and after hanging the double bait, it shows that it is 2 mesh, so that when pulling up the float to find the bottom for fishing, there will be a high probability of 1 mesh or water adjustment.

Lowering the fishing and high belonging to the big brother Chang in the drifting is a more "slow" form, mostly used for fishing large individual fish and "slippery fish", these forms of bait are generally double bait lying on the bottom, expensive in the lead skin is floating, and a little more sensitive than traditional fishing.

Among the many steps of fishing, drifting is one of the more important ones, which has a more important impact on the effect of fishing. There are many specific ways to adjust the drift, from the point of view of whether there is a hook, there are ways to adjust the drift with a hook, and there are also ways to adjust the drift without a hook. These two methods are different when it comes to operation, and each has its own advantages, so you can't simply judge which one is good and which one is not, but you need to look at the specific fishing environment to decide.

From the point of view of the application, if it is a wild fishing method, that is, for leisure fishing in wild waters, it is suitable to take the way of drifting with a hook. This is because generally speaking, the open rent situation in wild waters is more complicated, and the hook drift is relatively inaccurate, but can be adapted to the changing external environment. If it is a competitive fishing method, that is, fishing during the competition, it is better to adopt a precise drifting method, that is, without a hook.

In fact, the adjustment of the drift is to adjust the remaining buoyancy of the float by increasing or decreasing the lead skin, and change the state of the hook bait at the bottom of the water with a round sail to meet the needs of different fishing methods. The smaller the residual buoyancy of the float, the more agile the float will be, and vice versa, the more dull it will be. The purpose of drifting with or without hook is to close the sample, all for the orange hail in the process of fishing, the buoy reflects the obvious when the fish is baited, which is easy to catch.

The appearance is different, the accuracy is different, the adjustment method is different, and the effect is different.

If you want to find the bottom first, you should first find the reasonable position of the service float without the hook to adjust the standard. Among them, the calculation method of water depth and distance is different.

Ignoring bait weight, the so-called ignoring bait weight is not to ignore bait weight, but bait weight is a variable, and sometimes it is better not to consider it. For example, there is no hook, no sub-line drifting, and the bait is heavy and light does not affect the state of the double bait at the bottom of the water, anyway, it is all in the end. The advantage of this type of drift is that it is simple, suitable for wild fishing, and the strain is better.

It is common to change the bait during fishing, and after changing the bait, you find that the fishing target is not the same as the fishing eye. There is even a lack of clarity on whether the bait will be used after the bait is changed. The more typical situation is to start using rubbing bait, dismantle and replace the loach to try to slow down and know the stuffiness, the floating part is not adjusted, and the bait is not finished at all.

According to the simple formula of drifting: fishing mesh = mesh adjustment - double bait weight, for example, adjusting 4 mesh, double bait weight 2 mesh, we should fish 2 mesh or above to ensure that the lower bait is the end. If you want to fish the bottom, I am afraid that you must fish at least 4 meshes to have a good idea.

Everyone must find the mouth in the fishing, the essence of the mouth is to adjust the floating part, change the situation of the double bait in the water, so that the bait is easier for the fish to eat, and the float has an obvious posture, even if the mouth is found properly. For example, a fishing enthusiast adjusts four to two fishes, which is a situation where the double bait is lying on the bottom, and the fish is in good condition. B fishing enthusiasts are adjusting four to catch two, but the bait weight is different, resulting in B fishing enthusiasts are the bottom of the bait, the bait floats, the fish eat less, and the rod does not hit the fish.

The drifting here refers to the half-water adjustment with bait, and the length of the strand line doubled under the float seat after finding the bottom, so that the depth of the drifting is closer to the specific water level, which will be much more accurate. Hang double bait and constantly cut the tin pendant at the same time, adjust to the higher mesh of the floating exposed water surface. Pay attention to the number of meshes must not be high, because this mesh, the fishing mesh will be low at the end, and the fishing mesh is the most suitable for watching the drift, especially when the fish gradually becomes lighter.

For example, if you adjust 2 meshes, the removal of the double bait here is the number of meshes for the empty hook drift.

In order to determine the target of fishing, it is necessary to grasp the weight of the bait, and this method is more common. Just hang the double bait, half of the water is 2 mesh, after removing the double bait subtract 2 mesh, is the weight of the double bait, know the weight of the double bait, also know the weight of the single bait. Or hang a bait in the middle of the water to see the mesh, and you can also understand the weight of the bait.

For example, in the figure below, 4 mesh is exposed after the single bait is withdrawn, which indicates that the weight of a fierce bait is 4-2=2 mesh, and the weight of a double bait is 4 mesh.

After hooking the bait, the next step is to throw it into the water, and during the whole path of it drifting from the human hand to the water, the angler can be sure whether the fishing bait is atomized in the water, the length of time and the volume size, and at the same time can distinguish which water barrier the fish in the nest are in according to the double bait. In the black pit fishing for catching big fish, for example, the fishing bait in the hook is scattered during the period, the drift slowly rises to produce a sharp increase or decrease, which indicates that the fish are mostly blocking the fishing bait, if this situation in the den is relatively high, this indicates that the grass carp has long been off the bottom, and it is necessary to immediately adjust the drift and adjust the fishing bait at this moment. Anglers can reduce the proportion of bait moderately or use pull bait for fishing.