How to install a clamshell shoe cabinet? How to install the shoe cabinet

Installation steps for the flap shoe cabinet - fix the screws on both sides.

Use a screwdriver to screw one end of the three-in-one screw into the side panels on both sides and fix it, put the small holes on both sides of the upper and lower horizontal strips on the back into the corresponding three-in-one screws on one side plate, fix the upper and lower horizontal strips behind the back, and screw on the circular screw lock, and the lower horizontal strip in front is also fixed in the same way, just install it.

Steps to install a clamshell shoe cabinet – install the back panel.

There is a small gap between the upper and lower horizontal bars on the back, slide down the installation gap of the back plate (at this time, the side plate is facing the ground, and the upper and lower horizontal strips of the back are facing up), and then divide the vent cover into two and install it in the hole of the back plate, the same as the side panel, the top plate first installs the three-in-one screw with a screwdriver, aligns the top plate with the hole of the door of the back plate, and screws the round screw lock to fix it; After the top plate is fixed, you can install another side plate with the 3-in-1 screw installed, and the fixing method is the same.

Flip Shoe Cabinet Installation Steps – Install the Flip Bucket.

Use self-tapping nails to install the tipping bucket on the shoe cabinet door panel, there is a corresponding hole in the door panel, install it according to the installation, put the overall frame of the installed small shoe cabinet right (the side panel was facing down before), connect the flip bucket with the side panel accessories to connect the dump bucket and the side panel, at this time the shoe cabinet door panel is also connected to the dump bucket, and then you can realize the flip of the shoe cabinet door.

1.When installing the modular shoe cabinet, first choose the location where the shoe cabinet is installed, and then take out the panels, screws and other accessories in the package.

2.Then use a screwdriver to screw the 3-in-1 screws into the two side panels, and through the small holes on both sides of the upper and lower bars, 3Then tighten the screw lock and connect the upper and lower transverse plates and the side plates.

4.Usually there will be a gap between the upper and lower horizontal bars on the back side of the shoe cabinet, and the back panel will be inserted along the gap

Each flip shoe cabinet has a different style. Now, whether you buy it online or in a physical store, you will follow the drawings. And the drawings will teach you to follow the steps step by step very clearly. Even if you're telling you in great detail right now, it's not necessarily right.

Shoe cabinetThe installation steps are as follows: Bisun stool.

Prepare the tools: Screwdrivers, drills, rulers, pencils, etc.

Determine the installation location: According to the size of the shoe cabinet and the size of the room space, determine the location and height of the shoe cabinet installation, and mark the installation position on the wall with a pencil.

Install the fixing bracket: According to the design of the shoe cabinet, install the fixing bracket on the wall, and use a tool such as an electric drill to fix the bracket firmly.

Install the shoe cabinet: Place the shoe cabinet on the fixing bracket, adjust the level, and use a screwdriver to fix the shoe cabinet tightly with the bracket.

Install shoe cabinet doors: If the shoe cabinet has a door, install the door on the shoe cabinet according to the instructions and test whether the door can be opened and closed smoothly.

Perform cleaning and tidying

The shoe cabinet is installed with fixing, installing the back panel, and installing the tipping bucket.

1. First of all, you need to tear the package, you can see that there are many steel pipes and plastic edges, find the plastic side and put it on the ground, and insert the stainless steel tube into the corresponding hole on the side.

2. Then dock the other plastic side, and press hard (be careful not to press your hands), straighten the shoe rack, shake it, if the steel pipe in the middle of the shoe rack is loose or falls, it is because the steel pipe on both sides is not pressed, and then put it down and repeat the previous steps to press and press, then the shoe cabinet is installed.

Selection of shoe cabinets:

1. Size selection: There is no standard size for the size of the shoe cabinet, which is generally determined according to the size of the space, and the size of the shoe cabinet can be coordinated with the space. Sometimes it depends on individual needs, and if the owner has more shoes, you can also choose a larger size.

2. Material selection: common shoe cabinet materials include metal, wood and plastic. Generally, wooden shoe cabinets are mostly seen in home decoration, and they look more upscale. If you are just buying a shoe cabinet in a rental house, you can consider products made of plastic.

A tipper cabinet is a common piece of storage furniture that can effectively save space and store shoes. The following is the installation tutorial for the tipper cabinet:

1.Prepare tools and materials: tipper cabinets, screwdrivers, screws, wall nails, etc.

2.Depending on the size and weight of the tipper cabinet, choose the installation location and use wall studs to secure the bracket to the wall.

3.Install the tipper cabinet on the bracket, align it with the bracket, and secure the hole shroud with a screwdriver.

4.Make sure that the tipper cabinet is securely installed and check that the individual imitation parts are securely connected.

5.When in use, gently pull the flap to open or close the shoe cabinet. When storing shoes, you can adjust the size of each compartment according to your needs and make sure that the inside of each compartment is clean.

In conclusion, installing a tipper cabinet requires carefully reading the instructions and following the steps. If you're having trouble or aren't sure what to do, talk to a professional or customer service.

Installation method of tipper cabinet: fix the screws on both sides, install the back panel, and install the tipple.

1. Fix the screws on both sides

Use a screwdriver to screw one end of the three-in-one screw into the side panels on both sides and fix it, put the small holes on both sides of the upper and lower horizontal strips on the back into the corresponding three-in-one screws on one side plate, fix the upper and lower horizontal strips behind the back, and screw on the circular screw lock, and the lower horizontal strip in front is also the same fixing method, just install it.

2. Install the back plate

There is a small gap between the upper and lower horizontal bars on the back, slide down the installation gap of the back plate, and then divide the vent cover into two and install it in the hole of the back plate, the same as the side plate, the top plate first installs the three-in-one screw with a screwdriver, aligns the top plate with the hole of the back plate door, and screws on the round screw lock to fix it; After the top plate is fixed, you can install another side plate with the 3-in-1 screw installed, and the fixing method is the same.

3. Install the tipping bucket

Use self-tapping nails to install the tipping bucket on the shoe cabinet door panel, there is a corresponding hole in the door panel, according to the installation, put the overall frame of the installed small shoe cabinet right (the side panel was facing down before), connect the side panel accessories with the tipping bucket and take the panel, at this time the shoe cabinet door panel is also connected to the flip bucket, and then the shoe cabinet door can be flipped.

Advantages of tipper cabinets

1. The tipper cabinet is very beautiful, very space-saving, the capacity is also OK, small and practical, fine workmanship, beautiful style, easy to install, simple and generous, very practical, fresh and bright style, sturdy, acceptable quality, very heavy, very weighty, and very cost-effective.

2. The utilization rate of the tipper shoe cabinet is still very good. The main advantage of the tipper cabinet is to save space, most of them are large-capacity designs, whether they are flat heels or high heels, you can put them in, and the shoes of the whole family can be stored in. The shape design is stylish, simple and elegant.

<>1. Remove the two partitions in the cabinet directly, and then remove the dust with a wet cloth.

2. Measure the size of the inside of the cabinet and register it.

3. Use a Phillips screwdriver, remove the screws and make the notch opposite the vertical plate.

4. Twist the thin plate loosely and pat it from the bottom of the plate with your hand to remove the splint.

The main purpose of the shoe cabinet is to display unused shoes. With the progress of the Society and the improvement of human living standards, it has evolved from a wooden shoe cabinet to a shoe cabinet with a variety of styles and materials, including wooden shoe cabinets, electronic shoe cabinets, disinfection shoe cabinets, etc., with different functions and styles. Its face is filled with keys, invoices, handy promotional cards, bank statements, etc.