How to install the wardrobe How to install the wardrobe

In recent years, home decoration and interior decoration have become more and more popular, because people's living conditions have risen, so the taste of life has also begun to improve, and the furniture has become more and more. The wardrobe must be known to everyone, as the name suggests, is what is used to store clothes, just like the old wardrobe, but with more space and can put everything to wear. There are many types of wardrobes, there are modern and antique wardrobes, so how do we install the wardrobe, today I will introduce you to the installation of the wardrobe!

How to install a wardrobe – how to install a wardrobe

Laying a good foundation is the most important thing to install the base plate, no matter what you do, and the same is true for installing a modular wardrobe. If the bottom is not installed properly, it will lead to the instability of the structure of the entire wardrobe and affect the use. Therefore, when installing the bottom plate, the interface should be aligned as much as possible, and after the installation is completed, it should be gently pushed and shaken by hand, and it is best not to shake.

When installing the backplate, the combination wardrobe should pay attention to the angle between the backplate and the bottom plate should be kept at a right angle of 90°. It can be measured carefully with a measuring tool to avoid bias due to errors.

Install the side plate, the two sides of the side plate should be connected to the bottom plate and the back plate respectively, and the side plate, the back plate and the panel should be at a 90° right angle to each other. If there is a slight tilt during the previous installation, it should be corrected immediately during the process. Install the top plate, the top plate is installed at the top of the combined wardrobe, and be sure to pay attention to the stability of the interface and the firmness of the top plate when installing, so as to complete the installation of the entire frame of the combined wardrobe.

Install the remaining parts, after the overall frame of the combined wardrobe is determined, the remaining parts such as doors, drawers, shelves, clothes rails and other parts can be installed in the predetermined position one by one. Once the frame and components are in place, the entire modular wardrobe installation step is complete.

How to install a wardrobe —Installation precautions

As the name suggests, the combined wardrobe is assembled from different parts of the wardrobe, and it is a very popular household product due to its high variability and easy disassembly and assembly. Nowadays, many young people like to buy furniture online, so they basically send all the parts of the wardrobe, and they need to assemble it themselves. The production process of the overall wardrobe is different from the general purchase of panel furniture, first of all, the designer will have a close contact and communication with the user, understand the user's hobbies and their home style, and then come to measure and design a reasonable overall wardrobe.

During this period, the designer will provide computer renderings, and then make the overall wardrobe from the assembly line according to the drawings after the user is satisfied.

I believe that after reading the explanation, you should know how to install the wardrobe of your choice, but here it is recommended that you do not do it yourself, because after all, you have no experience, or choose some professional people and let them install according to your ideas. However, if you buy a wardrobe and you ask the merchant to install it for you, the merchant will not refuse, because refusal may reduce the number of customers. That's it, I hope you can dress up your room with a different flavor when you install your wardrobe!

1. Generally speaking, the wardrobes, plates, hardware, etc. purchased from regular wardrobe manufacturers will be sent to the home, and these materials are very well packaged to avoid bump damage, we must unpack and check whether these materials are in good condition.

2. The fixing screws on the wardrobe plate will be reserved according to the design drawing or the actual assembly needs, so as to avoid accidental loss during installation, and fix the screws directly on site with special tools. 3. The baseboard position of the wardrobe placed against the wall needs to be sawed off, so that the wardrobe can be placed in line with the wall. 2. After the installation of the cabinet body 1 and the bottom plate are ready, you can start to install the floor of the wardrobe.

You can clean the floor first, otherwise the bottom of the wardrobe will be more difficult to clean after assembly.

2. The fixed frame installs the side plate and the back plate according to the structural parts of the wardrobe plate, and fixes the frame of the body first.

3. If you need a herringbone ladder to install the roof, it will be more convenient, after all, the wardrobe is generally more than 2m high, and then the roof house is fixed on the top surface with rivets.

4. Install the shelf partition is the board of the wardrobe separation space, which is carried out after the top plate is installed, as long as the shelf is placed in a fixed position and fixed, special attention is paid to each partition to be suitable, the partition and the back plate, and the side plate are to be fixed. 5. Fix the door rail, and then you can start to install the door rail on the top and bottom edge of the wardrobe, and choose a light and strong alloy material.

6. It is relatively simple to install the clothes rod to install the clothes rod, lay the fixed rivets, and pay attention to the balance on both sides.

3. The final acceptance of the wardrobe installation steps.

1. Install the door leafThe installation of the door leaf should be fixed first, and then the guide rail on the bottom edge should be fixed to avoid the door leaf falling off during the installation process.

2. After all the adjustments and improvements are installed, it is necessary to check the whole and adjust if there is a deviation.

3. After completing the acceptance, shake the cabinet to see if it is firm.

The above is a detailed introduction to the wardrobe installation steps, which are very basic. If you want to install the wardrobe well, it is not a step that can be sloppy! The more complex the design or the more functional the wardrobe, the more troublesome it will be to install, and you need to find a professional maintenance master to install it.

This is best installed by a professional master. Personally, I don't have experience to install badly.

Which manufacturer did you buy? None of the installation instructions are available.

The cabinet is composed of upper cabinets, base cabinets and hardware. First of all, we must be familiar with the process, and the cabinet installation needs to meet the following three conditions: the kitchen door cover is installed, the water and electricity transformation is good, and the tiles are paved.

1. Install the door cover: After installing the kitchen door cover, the construction personnel can measure the size and structural layout of the design cabinet.

2. Pave the water and electricity lines: The water and electricity transformation is a basic project, and the water and electricity lines of the kitchen must be laid before installing the cabinets. If the water and electricity lines are not laid before the cabinet is installed, it is necessary to dig tunnels and lay pipelines again, which will definitely affect the design of the cabinet in this process.

3. Pave the tiles: install the cabinets after the tiles are pasted in the kitchen, and the floor and back of the cabinets will not be changed after the construction of the ground and wall is completed.

What are the precautions for cabinet installation.

1. Installation sequence: Generally speaking, the installation order of cabinets is base cabinets, hanging cabinets, faucets and sinks, stoves and electrical appliances. Once the order is out of order, the installation will not go smoothly.

2. Ground leveling: If the ground is not cleaned, it is impossible to accurately find out the level of the ground, and if the cabinet is not balanced with the ground, then the cabinet door will not be balanced.

3. Sealing problem: The sealing here not only includes the cabinet, but also the sealing that is not sealed after the opening of the countertop.

1. Preparation work in the early stage: the installation of cabinets should be paved with wall and floor tiles in the kitchen, and the ceiling should be installed after it is done, if it is customized, it will take about 15 20 days, and the installation will take 1 day; If it is a finished installation, it will be very short, but it is best to install it with the smoke machine stove.

2. Material entry and cleaning: Before the cabinet is installed, the kitchen needs to be safely protected to keep it clean and hygienic as a whole.

3. Install and adjust the floor cabinet: according to the designer's drawing, accurate positioning, in most cases it is necessary to put it down, and then install the footing uniformly, but the protective measures must be in place.

4. Level adjustment: adjust the balance of the base cabinet through the adjusting leg of the base cabinet, and keep the error at plus or minus 1mm.

5. Installation and fixing of hanging cabinets: first of all, it is necessary to confirm the layout of water and electricity pipes to avoid damage to them, combined with ergonomics, reasonably arrange the installation height of hanging cabinets, draw horizontal lines, and keep the height of the horizontal line and the table top at 650mm.

6. Cutting the backing plate of the countertop: the cabinet top, sink and stove must be added with a backing plate, and a small amount of glass glue can be used to fix Jing Kaiding.

8. Installation and on-site cleaning of hardware: each process must be installed with quality and quantity to avoid subsequent rework.