How to remove the rearview mirror of the Skoda Octavia

1. First of all, adjust the angle of the rearview mirror of SAIC Volkswagen Skoda Octavia and insert the screwdriver into it.

2. Next, use a screwdriver to pry open the buckle between the lens of SAIC Volkswagen Skoda Octavia and the lens driver, and you need to pay attention not to damage the lens of the rearview mirror.

3. Next, unplug the wiring harness plug on the rearview mirror of SAIC Volkswagen Skoda Octavia, see the figure below for details.

4. Finally, you can remove the rearview mirror of SAIC Volkswagen Skoda Octavia, see the picture below for details.

It's reflective lenses, right? Oh, it's easy to do, I'll give you a picture! This is what I gave to me when I bought Yihe blue glasses, you can take a look, I hope it can help you!

First: Take a hammer. The second smashed down. Third; And most importantly, take a broom to sweep the fragments of your mirror. Successfully take it off, and then buy a rearview mirror assembly in the 4S store and install it OK

Without rainfall, it can be removed by turning the rearview mirror support rod counterclockwise. The one with the rainfall is to disassemble the left and right decorative covers of the rain sensor, break it directly from the middle, push it down the groove, and shake it left and right to remove it with a little force.

The rearview mirror is a tool for the driver to directly access external information such as the rear, side, and bottom of the car while sitting in the cab seat. In order to facilitate the driver's operation, prevent the occurrence of driving safety accidents, and ensure personal safety, all countries have stipulated that rearview mirrors must be installed on the car, and all rearview mirrors must be able to adjust the direction.

Switch the gear lever to R and press and hold the SET button on the driver's seat until you hear two beeps, indicating that the rearview mirror reversing linkage function has been turned off. The angle of the rearview mirror is essential for the driver's safe driving, so the angle of the rearview mirror needs to be adjusted.

How to set up the rearview mirror under the hem of the car

Adjust the right rearview mirror to the normal position, adjust the switch to the R position, keep it in reverse gear (do not stop), and the right rearview mirror will automatically swing to a certain angle. At this time, press the adjustment switch to adjust the right rearview mirror to the normal angle of the hem, and then adjust the switch to the R position, the right rearview mirror will automatically swing to the preset angle, and the gear will return to the P position. The driver's view from behind the car basically depends on the angle of the mirrors.

The angle of the rearview mirror is essential for the driver's safe driving, so the angle of the rearview mirror needs to be adjusted. When designing a rearview mirror, the main design points are: the field of view that can be obtained by the rearview mirror (indirect vision), the distortion of the image, the sharpness of the image, the size of the image, the position of the image in the rearview mirror, etc.

It is easy to adjust to changes in the driver's point of view.

The rearview mirror should be installed in a position with minimal vibration up and down the body. When designing rearview mirrors, it is essential to study the following issues: the shape and structure that protects pedestrians and passengers from harm.

It is in line with the styling concept of the whole vehicle. Shape that reduces air resistance in the air. Adaptability to the various climatic conditions of the world.

Choose structures and materials suitable for mass production.

You need to adjust the angle of the rearview mirror first. When there is a large gap between the rearview mirror and the rearview mirror housing, simply pry the lens off with a pry bar.

If you want to remove the mirror housing, it will be easier. Octavia's mirror housing is secured with a snap, which only needs to be pried open with a pick.

The rearview mirror is a part that is easily damaged when using the car. If you are not careful when driving, it is easy to rub into the rearview mirror.

If you wipe the rearview mirror housing, it will hurt the paint surface on the housing, exposing the plastic, which has a great impact on the appearance.

Be careful not to touch the rearview mirror when driving or opening a door.

Mirrored lenses are also prone to breakage. If the lenses are broken, they can be replaced using the methods described above.

Some cars are equipped with anti-glare lenses, which are very expensive.

Some criminals steal anti-glare lenses from some luxury cars. People who drive should be careful. If you want to buy anti-glare lenses for ordinary luxury cars in a 4S store, ** is around a few thousand.

The mirrors will also be integrated with the turn signals. If the turn signal is damaged, the mirror housing must be replaced.

Some high-end car mirrors also have cameras, which are very expensive if damaged. Therefore, riders must pay attention when driving.

Millions of car purchase subsidies.

You need to adjust the angle of the rearview mirror first, and when there is a large gap between the rearview mirror and the rearview mirror housing, you can pry off the lens with a spudger.

If you want to remove the mirror housing, it's even simpler. Octavia's mirror housing is secured by a snap, which only needs to be pried open with a pry blade.

The rearview mirror is a part that is more susceptible to damage when using the car, and if you are not careful while driving, it is easy to rub against the rearview mirror.

If the mirror housing is rubbed, it will hurt the paint on the housing, which will expose the plastic, which is very aesthetically detrimental.

When driving or opening the door, be careful not to touch the rearview mirror.

Rearview mirror lenses are also very easy to break, and if the lenses are broken, the lenses can be replaced using the methods described above.

Some cars are equipped with anti-glare lenses, which are very expensive.

Some criminals will also steal some anti-glare lenses for luxury cars, so be careful. If you want to buy anti-glare lenses for general luxury cars in 4S stores, they are about a few thousand yuan.

Turn signals will also be integrated into the mirrors, and if the turn signals are damaged, the mirror housing must be replaced.

Some high-end cars will also have cameras in the rearview mirrors, which are very expensive if damaged. Therefore, car enthusiasts must pay attention when driving.

The method of exterior mirrors, remove the door panel, the door panel is divided into the upper middle and lower, the upper is behind the rearview mirror, there is a cover plate, pry it open with a flat mouth, that is, the inner handle and the armrest part, pry open the outer cover plate, and there are screws inside. The lower part is a ring of screws around the lower part and removed with a cross lift.

The second step, after the first step is completed, you can take down the panel, at this time you will find that there are a few screws behind the rearview mirror, and there is a plug that is connected, unplug the plug, remove the screws to take it down.

In addition, the rearview mirror in the Octavia car is difficult to remove, whether your rearview mirror has a rain sensor, if not, turn 90 degrees to the left, pull down. If there is, you need to use a small flat screwdriver to pry open the round seam in the middle and pull it down.

Photo by Chen Meilian of Pacific Automobile Network).