-
SAIC-GM Skoda Octavia does not ignite, the instrument light does not light up ASR light indicates that the throttle electronic system is faulty, and the Skoda Octavia throttle electronic system needs to be initialized and reset, and the specific operation steps for the initial reset of the Skoda Octavia throttle electronic system are as follows:
1. Open the door of the SAIC-GM Skoda Octavia driver.
2. Press the brake pedal of SAIC-GM Skoda Octavia to prepare for the engine power.
3. Put down the hand brake.
Fourth, press the one-button start button of SAIC-GM Skoda Octavia.
5. The instrument lights of SAIC-GM Skoda Octavia are all lit up, which proves that the engine has been connected to the power supply.
6. Press the top of the lever of the SAIC-GM Skoda Octavia located on the right side of the steering wheel, do not release it after holding it, and continue to press and hold it for more than 5 seconds, and the initial reset of the Skoda Octavia throttle electronic system can be completed.
-
You can try it by stepping on the gas pedal! If only you could! Just go into the pits and check it out!
Maybe the throttle is faulty, if you park your car near the garbage heap, maybe the rat is biting the line! Please check as soon as possible! It is recommended to find an insurance company to tow it into the repair station for free inspection!
Hope it helps! Feel free to ask! [If you have a problem with the car, ask the car master.]
4S shop professional technician, 10 minutes to solve. 】
-
Skoda Octavia engine fault light on, such a situation indicates that the vehicle's throttle area carbon accumulation is too much, the vehicle's throttle needs to be cleaned, after cleaning the throttle can eliminate the engine fault light, the specific operation steps for cleaning the Skoda Octavia throttle are as follows:
1. Unscrew the fixing screws of the Skoda Octavia intake pipe.
2. Remove the air filter of your Skoda Octavia vehicle.
3. After the air filter of the Skoda Octavia vehicle is removed, the Skoda Octavia throttle door is exposed, and the Skoda Octavia throttle door is in a closed state at this time.
4. Insert the wrench into the Skoda Octavia throttle door, and open the Skoda Octavia throttle door.
5. Spray throttle cleaner into the Skoda Octavia throttle valve, and brush it back and forth with a toothbrush at the same time.
6. After cleaning, use a paper towel to wipe the inside of the Skoda Octavia throttle and the operation is completed.
-
The yellow light indicates that the engine is faulty, but the fault does not affect the normal operation of the engine, but it must be tested and repaired; The red light indicates that the engine has a serious fault, and under normal circumstances, it needs to be repaired immediately, if it is in special road conditions, it can be used in an emergency, but you need to pay attention to the working status of the engine at all times.
There are many reasons for the failure of the car engine, including the failure of sensors, such as water temperature sensors, crankshaft sensors, oxygen sensors, etc.; There are also other faults like spark plug failure, ignition coil failure, fuel pump failure, oil circuit blockage, etc. The engine fault signal is sent by the ECU (engine computer), and the ECU controls all the electronic equipment of the entire engine, such as electronic throttle, fuel injector, generator, fuel pump, etc., covering various systems such as air intake, exhaust, fuel, ignition, timing, etc.
The first is that the car can't start, which may be caused by the failure of the fuel pump or ignition parts, then let's call ** for help, after all, the chance of ordinary people wanting to make the car come back to life by themselves is very small. The second is that the fault light is on, but there is no abnormality in driving, this may just be a sensor failure, in this case, you can continue to drive temporarily, but it is best to slow down at medium and low speeds, and the next destination is of course the repair shop.
-
What should I do if the Skoda Octavia engine fault light is on? In this case, you must find an after-sales person to help you repair it, it must be the engine, there is a problem.
-
If you seem to be in this situation, you generally need to go to the repair shop to read the fault code with a decoder, and then repair it according to the fault code prompt.
If you don't understand something, feel free to ask, and I will give you a satisfactory answer!
-
The engine fault light is usually lit for the following reasons: 1. Combustion.
The burning state is not good.
The engine combustion state is not good because the engine fault light is on.
The main principle of specialization.
Causes. 2. Engine knocking.
There are usually three scenarios:
The first case: the car is weak;
The second case: the car is weak and the engine noise is too loud;
The third case: there is an obvious knocking sound.
In the first case, some engine fault lights will turn on, some will not, and in the second and third cases, the engine fault lights will inevitably come on.
3. The internal reason why the engine failure light is on.
1) The fuel quality is not good.
2) The inside of the engine cylinder is not clean and there is carbon deposit.
-
It needs to be cleaned by a special instrument, or tested.
-
Use a computer to read the fault, and then prescribe the right medicine.
-
1. The quality of gasoline is poor and not up to standard.
Shortly after refueling, the engine fault light lit up on the dashboard of the car; This is generally due to the addition of poor quality gasoline at non-standard gas stations, resulting in insufficient combustion of the oil-gas mixture and the engine fault light when the engine is working. This will not affect driving safety, but it will cause more or less harm to the engine.
Solution: Replace high-quality gasoline.
2. Oxygen sensor failure.
Nowadays, there are two oxygen sensors installed in cars, one at the front and one at the front and one at the front of the three-way catalytic converter. The function of the front oxygen sensor is to detect the air-fuel ratio of the engine under different working conditions, while the ECU computer adjusts the fuel injection amount and calculates the ignition time according to this signal. Therefore, if the oxygen sensor is damaged or the sensor plug is damaged or loose, the mixture will be too thin or too thick, which will cause the fault light to turn on.
Solution: Repair the oxygen sensor.
3. The air flow sensor is faulty.
The air flow sensor is also known as the air flow meter, if the air flow sensor or line fails, the ECU will not get the correct air intake signal, and it will not be able to carry out normal fuel quantity control, resulting in the mixture being too thin or too thick, and the engine cannot work properly.
Solution: Repair the air flow sensor.
-
If this fault light appears on the instrument now, and you can't turn it off when you use the switch, it means that Paixiang your drive anti-skid function has failed, not that you turn off this function, like this situation will not affect your normal driving, if you want to clear the fault, you can find a repair shop nearby, and then use the decoder to read the specific fault**, according to the fault** to do maintenance, after the leak brigade maintenance, you can return to the stool to clear the fault**, this still needs to be noted.
-
Summary. Hello, none of the indicators of the Skoda Octavia dashboard are lit: the instrument light is not lit because the fuse is broken, and the poor quality of gasoline will cause the mixture to burn insufficient in the cylinder, resulting in the fault light on, and it is easy to produce carbon deposits.
The presence of carbon deposits in the inlet tract and piston tip will lead to poor atomization, which will lead to insufficient combustion and the failure light will be on. <>
<> none of the indicators on the Skoda Octavia dashboard are lit.
After changing the battery. None of the indicators on the standard stand are on, and they can't be hit.
Hello, none of the indicators on the Skoda Octavia dashboard are lit: the instrument light is not lit because the fuse is broken, and the poor quality of gasoline will cause the mixture to burn insufficient in the cylinder, resulting in the fault light on, and it is easy to produce bad laughing carbon deposits. The presence of carbon deposits at the top of the inlet and piston will lead to poor atomization of the manual cavity, which will cause insufficient combustion and cause the fault light to be on.
Big Red Flower Shirt].
There was no response at all to the taxi.
The insurance is not reported.
Hello, soon after replacing the new battery, the battery will leak out, resulting in no car. Therefore, when the car is buried in the car to replace the old battery, it must be sure that the vehicle does not exist like an ant leaking before replacing the new battery, otherwise the new battery will be easy to not hit the car again after a long time. <>
<> new battery was installed.
Either Li Ji is a new battery is not the original lead sock battery, or the model does not match. Some models need to register and match after the battery replacement is completed, if it is only replaced, and there is no registration matching, the new battery may not work normally, and then it needs to be re-registered and matched. <>
Happy Excitement] <>
TV passes. The new battery that has just been replaced by the car is quietly on fire, and it may be that there is a discharge fault in the circuit of the whole vehicle, or the battery is poorly charged. The charging is normal, but the new battery is insufficient for a few days, and it is possible to destroy the circuit self-discharge.
If the battery has power after running for a while after starting, there should be no problem with charging, then it is possible that the rectifier is damaged. <>
<> extended information: The instrument panel reflects the working status of each system of the vehicle. Provide the driver with information about the operating parameters of the car that they need to build.
Displays fault conditions and alerts. An important tool for data analysis in the dashboard. The Zhipei closed dashboard has some features that make it different from other digital products.
On the general highway, if you don't go uphill or go against the wind, you can drive up to 240km h. If you go downhill and downwind, the maximum speed can be even higher.
1. Take the wire: This is a necessary item for the car to take the electricity, do not take two wires to make do, because the instantaneous current of the vehicle at the start can reach 200-600A, and the diesel car even reaches 1000A, if it is calculated, 10 square copper wires can ensure the smooth and safe start, so the car battery connection line must buy the right brand, the quality is the best, do not try to be cheap. This is one of the must-have items in the car, once the battery is out of power, you can take it out and use it, and you can also help others when you don't use it. >>>More
The Cruze sports styling, the Skoda Octavia as a family sedan, the positioning is different. If you are young and energetic, buy the Cruz, and if you are mature and stable, buy the Skoda Octavia. Both cars are good cars.
Due to processing and assembly errors, the frictional resistance of the moving parts of the new car is always much greater than normal when it starts to run, and the running-in (also known as walking) effect in the early stage of the car will have a great impact on the service life, working reliability and economy of the car. Therefore, the run-in regulations must be strictly implemented when using new cars. >>>More
Our Skoda Octavia manual standard configuration, usually in the urban area of Nanjing combined with the suburbs of 200 yuan fuel can run 400 kilometers, now the oil price is a liter, so calculated, the average fuel consumption is about 8 oil per 100 kilometers, and the high speed is more economical, about 100 kilometers of oil.