The wall tiles in the living room are cracked, can you directly paste the wallpaper?

Cracking of wall tiles in the living room, before pasting wallpaper, check the reason for the cracking of the tiles, whether it is the quality of the tile paste, or the cracking of the tiles caused by cracks in the wall, we according to different situations, the decoration of the back paste wallpaper, first to flatten all the magnetic sheets, polish and then paste, it is recommended not to paste wallpaper, may not be used for too long, if it is easy to have problems in the case of south wind days, the wallpaper glue on the tile is not very sticky, and it will fall off when it encounters water. If there is a crack in the wall, after the relevant departments have evaluated, we are making plans for the future. If the quality of the tile paste is cracked, it is not recommended to paste wallpaper on the tile, and the following is an answer for the readers.

If the living room wall tiles are cracked, if it is a small local crack, you can use tile repair paste to repair it locally, or ask a tile beautician to go to the site for repair and beauty. One is to directly buy tile repair paste, repair it yourself, clean the cracks of the tiles, free of dust, and then use the repair paste to repair and repair. One is to ask a tile beautician to repair the cracked tiles on the spot.

Of course, if you can directly replace the new tile, the color pattern is the best. The tile can not be directly pasted with wallpaper, the adhesion is not good, if you want to paste wallpaper, you have to remove the tile.

For the wall tiles in the living room are cracked, can you put wallpaper? The point given is that it is not possible to put wallpaper on cracked wall tiles. We can only apply wallpaper after the wall tiles have been treated.

Our treatment of the wall must be based on the selected material, and then the base layer of the wall can be treated in order to decorate the surface layer.

Therefore, it is divided into two different situations, and the following will answer them one by one. Is the living room tiled? If so, you can't put wallpaper directly.

If it is a latex paint wall, it is best to repair the cracked part of the wall, and then paste the wallpaper after sanding, it is recommended to find the cause of the cracking, and then paste it after repair.

If it cracks, but you don't deal with it, the gap may get bigger and bigger in the future, and if there is a crack, the wallpaper will also be affected. Therefore, it is recommended to repair the wall and then carry out the wallpaper work.

In fact, it is also possible, because in this way, the gaps of the tiles can be directly blocked, and it does not affect the aesthetics of this aspect of the problem.

No, you have to take the wall tiles off before you put the wallpaper, so that the wall tiles don't fall off when people are not looking.

I don't think so, but we still need to fix the wall tiles to avoid trouble in the future.

Of course. But this will affect the aesthetics, and it will also be prone to cracking in the later stage, so I don't mind doing this.

No, because sticking wallpaper directly is just an indicator and not a cure. And it's very bad for the wall itself.

wall deformation; Tile cracking caused by deformation of the wall can show regular cracks in the horizontal, vertical or diagonal directions.

The paste is unqualified; Unqualified adhesive will also lead to problems such as hollowing and falling off after tile paving.

The tiles are not soaked in water; If the tile with a certain water absorption rate is not soaked in water before paving, the tile will absorb its moisture in the process of cement mortar coagulation and strength rise after paving, resulting in cement water loss and no adhesion, and the strength is reduced, and the adhesion of brick to cement or cement to the original wall is reduced, resulting in hollowing and falling off.

There are no seams left between the tiles; If there is no proper gap during paving, it will also cause the tile to be crushed, cracked, hollowed out or fall off.

Poor quality tiles; Some inferior tiles are not hard enough, and if the load-bearing is too high during use, they are easy to crack (mainly referring to floor tiles).

Some small cracks on the tile generally do not affect the use, so in order not to blacken these cracks, become ugly, we need to deal with the cracks as soon as possible, and buy a professional tile grout to add the joint, which is troublesome and wasteful, and the use of glass glue to add the seam is too technical. You can actually use toothpaste to repair these cracks, gently squeeze out some toothpaste, and use your fingers to evenly apply the toothpaste to the cracks. Gently wipe off any excess toothpaste around you with a cloth or paper towel.

Wait until it's dry, and your tiled walls will look like new. If the tiles are colored, buy toothpaste of the corresponding color, or mix gouache paint in white toothpaste, and the effect of applying the gaps in the tiles is just as good. Cracks and scratches on the surface of the tile can also be repaired with white toothpaste, and the scratches on the surface of the tile will disappear after applying it a few more times.

The reason may be X0D X0A1, the lack of light steel hanging net between the interior wall tiles and the pressure plate, and the deformation of the cement pressure plate after pasting, and the internal stress causes the interior wall tiles to crack. In the face of this situation, it can not be dealt with simply, and the correct way to deal with it is to smash off the tiles, clean up the base layer, and re-carry out the construction of the light steel hanging net. This will not be the case if the construction is carried out in strict accordance with the regulations.

The performance of the three cases of x0d x0a is different, the first is the most common, and the cracking is characterized by large-scale cracking. The second characteristic is longitudinal slit cracking. The third is local bulging, monolithic cracking, or checkers-style cracking!

Wall tiles are glazed tiles, or glaze cracks of wall tiles, wall tiles cracked, in other words, the brick embryo body has more voids and the strength is not high, and the embryo body is ceramic, both of which have reasons, its own heat dissipation state is general, and the round eggplant makes them co-defendants, so they are susceptible to the expansion of the cavity heat, and the water absorption rate in the cement slurry is greater after being absorbed too much by the wall tiles; The reason for this situation is the poor quality of the wall tiles purchased by the developer; The main ingredient of paving wall tiles is cement, as for the mistakes let them distinguish in court, it is easy to produce hollow drums, share the burden, cement from the initial setting to the final setting of this stage of Napai will produce a chemical reaction called hydration heat, it is recommended to put them together, and the wall tiles are affected by the solidification and expansion of cement slurry will also be driven to rise, and the workers who pave the wall tiles fail to soak the wall tiles in enough water.

1. The gap is too small, which is caused by thermal expansion and cold contraction;

2. Quality problems;

3. If it is a place where water is seen, in winter, the moisture will penetrate between the glaze layer and the germ layer, and then when the moisture freezes, it will expand, and the glaze layer will be peeled off.

A few days ago, a few tiles suddenly fell from the house, but fortunately they didn't hit anyone, which scared me to death! There is no problem with looking very stable during acceptance, but when the wall tiles are removed, it is simply caused by not shoveling the wall skin. I can't find the person in charge of the renovation, where can I reason?

Look at this large area of white wall skin, how can the tiles be firmly pasted, and they can't be used for a long time! Therefore, you must remember to shovel the wall skin when sticking wall tiles, otherwise you will not be able to find anyone to reason with you.

I looked for a decorator again, and they said that they wanted to reinstall, because the area was too large, but now it was inconvenient to reinstall, so they temporarily used expansion screws to do a simple fix.

Here are a few reasons why wall tiles are used for a short time and are easy to fall off:

1. The quality of wall tiles.

The water absorption rate of wall tiles is directly related to the adhesion force, but it is not that the higher the water absorption, the better, if the moisture is not enough, it will be inconsistent with the cement shrinkage, which will lead to the falling off of the tiles.

2. The grassroots work has not been done well.

Underlying questions are often the most common. When we decorate a new house, we will shovel the wall skin, but most of us simply shovel or paint the wall. However, no matter how much the wall is brushed, if the wall skin is not cleaned, it will greatly affect the friction and adhesion of the wall.

Also, the wall is not watered enough, and the tiles are not cleaned properly, which will leave hidden dangers.

3. The tile is not dry and receives bumps.

When the cement mortar has not been completely bonded to the wall and is dry, it is best not to let it be collided, which will cause gaps in the mortar, resulting in unstable paste, and it may fall off in the future.

4. Gaps between tiles.

Gaps need to be reserved between wall tiles, because the effect of thermal expansion and cold contraction will cause them to squeeze each other, resulting in fracture or falling off. The cement mortar behind the wall tiles should not be too thick, which will not only affect the overall effect of the space, but also the thermal expansion and contraction will be very unstable, which will accelerate the falling off of the tiles.

Generally, cracking recaptures the place where the porcelain tiles are paved, and there are generally the following situations:

1.Most of them are cracks caused by inappropriate cement ratio;

2.The substrate is not cleaned, resulting in cracking caused by the hollowing of the wall;

3.The moisture of the cement is quickly absorbed by the wall, resulting in the thermal expansion of the cement too quickly and the opening or hollowing of the drum falls off;

4.The surface tiles of the wall are cracked due to the settlement of the staircase or the change of the wall itself;

5.The tile body is soft or hard, and the glaze is thin. Cracking caused by rapid absorption of moisture with cement and then expansion;

Note: Generally, ceramic tiles are finished or semi-finished products, and they will not crack without external influence.

Please give the owner a good inspection before use, and return the tiles to the manufacturer if they are found to have cracks or internal injuries.

First of all, the wall treatment is not in place, the wall is not shoveled clean, such as the gypsum bottom is not cleaned up, or the wall has oil stains, the second is that the water-cement ratio is not suitable, the cement number is insufficient and the cement is not mixed with 107 glue, etc. will not be pasted, and then the tile is not watered enough when the tile is soaked, so that after the tile is pasted, due to the insufficient water absorption of the wall and the tile, the wall and the tile will absorb a large amount of water in the cement, resulting in the reduction of water in the cement, thereby affecting the solidification of the cement, The tiles can not be hung, these reasons will cause the tiles to crack and hollow, and there are exterior wall tiles, when the weather is cold, the construction will definitely crack and hollow when the weather is warmer.

Cracks in wall tiles are very likely to be different elastic coefficients between bricks, colliding and extruding under the accumulation of thermal expansion and contraction, and eventually resulting in cracks or tile breaks. In addition, environmental friendliness is also very important, Greenridge's MS glue does not contain any solvents and toxic substances, and is a truly safe product to use, and pregnant women and children can use it with confidence.

To put it simply, MS adhesive is an environmentally friendly adhesive that does not degum and can be used with confidence.

Reason 1: Your tiles didn't soak enough water before they were put on the wall, or they didn't soak in water! (Generally, porcelain tiles of 300 * 450, 300 * 600 and other specifications must be soaked in water before pasting, because the water absorption rate of porcelain tiles is very high, and they quickly absorb cement slurry, so that their tensile force suddenly increases, resulting in ice cracking of ceramic tiles!)

Reason 2: The cement label or proportion is too large!

As long as you do a good job of processing, it won't fall off.

Ways to prevent tiles from falling off:

First e68a8462616964757a686964616f31333365633932, tile decoration construction soaking water according to demand soaking water Many people will return the tiles that have not been used up, and it turned out that they can not be returned, the reason is that the tile decoration construction has been soaked in water, the reason why it is necessary to soak in water, is because the tiles pasted in this way will stick more firmly, and there will be no hollowing.

Suggestion: how much you need to soak, enough for construction, once soaked can also be more out of the way can not be returned, soaking water should be combined with the construction progress of workers.

Clause. Second, the pre-paving work should pay attention to see whether the workers get the bricks on the paving, generally have to pre-pave, otherwise when the paving to a certain extent, it is found that the brick arrangement effect is not good during the tile decoration construction, and you want to remove and re-pave, which causes unnecessary loss and tear.

Suggestion: Make a plan for paving bricks before paving.

Clause. Third, the proportion of coordination is not cracking, many friends who have renovated have reported the cracking of tiles during decoration construction, the reason is that the proportion of cement and sand is mixed is not coordinated or the cement is too high. The proportion of cement is large, and the adhesion is strong during construction, but if the proportion of cement is too high, it is easy to crush the bricks.

Suggestion: The ratio of wall tiles is 1:3, the ratio of floor tiles is 1:2, and the cement number of cement is cement.

Clause. Fourth, it is best to wait for the tile decoration construction to dry and solidify after many workers in the tile after the tile is paved immediately after the joint, in fact, this is not appropriate, just paved has not been completely dry, at this time the joint is easy to cause the tile to loosen, the later tile may be easy to fall off.

Suggestion: Hook joints during tile decoration construction should be carried out after drying and fixing during tile decoration construction. Generally, any time after 24 hours is fine.

Probably to pay attention to these points, these points are more neglected, like the wall before the brick, to clean the wall, workers in the construction, encounter problems in a timely manner, are usually encountered, not in detail, in addition to the wooden wall to paste tiles, it is best to fix the barbed wire on the board, this is better to ask a professional master to do better.

The wall tiles are brushed with tile adhesive, and there is no problem with the wet hanging process.