Can the wall be painted with latex paint and still paste wallpaper or wall stickers?

Now the stores that sell wallpaper have different base films for latex paint and putty powder, if they spray latex paint, they will use another base film, or they don't need to shovel off, so it's not too much trouble.

Latex paint can be applied to the wall, but it may not be secure.

In the pasting wallpaper is the choice of auxiliary materials is very important, in addition to ensuring its quality is no problem, but also to ensure the environmental performance of auxiliary materials, can not cause damage to the human body. Before pasting wallpaper, what is brushed on the wall is not a light varnish (varnish), but a colorless and odorless base film; The wallpaper adhesive is no longer wallpaper glue and white latex, but wallpaper glue is directly mixed with water; This ensures that there is no smell in the room where the wallpaper is being laid.

Pay attention to the problem. 1. The doors and windows of the room should be closed and dried in the shade after the wallpaper has just been paved. Because the room where the wallpaper has just been laid is ventilated immediately, it will cause the wallpaper to warp and bulge.

2. After 3 days after the wallpaper paving is finished, you should gently wipe off the remaining wallpaper glue at the seams of the wallpaper with a damp towel.

3. Wallpaper is more resistant to scrubbing, but it is not resistant to the bump of blunt objects, if you find a small surface damage, you can use similar color pigments or paints to remedy.

4. Non-concave and convex wallpaper, you only need to clean it with a feather duster on weekdays.

5. In case of wet weather, try to close the doors and windows as much as possible to prevent the water from being too heavy and the wallpaper will be damp.

After the wall is painted with latex paint, the wallpaper can be directly pasted.

Determine the size and area of the wallpaper.

Before laying the wallpaper, it is necessary to determine the size and area of the wallpaper, and then make appropriate cuts according to the texture and size of the wallpaper.

2.The walls must be cleaned.

If the wall of a second-hand house is renovated, be sure to remove the paint and wallpaper on the wall, and fill the potholes on the wall. Pay special attention to more, if there is cloth or waste silk on the wall, remember to clean it up in advance, otherwise it is easy to puncture the wallpaper when posted. Maintaining the flatness of the wall can make the wallpaper more compliant, and the final effect will be more beautiful.

3.Crop the wallpaper.

1) When cutting the wallpaper, you should carefully observe the symmetry of the wallpaper and make a good plan for the wallpaper. In this way, the effect of posting will be more beautiful.

2) If you want to use multiple wallpapers, remember to number the wallpapers sequentially.

3) When the wallpaper is cut, soak the wallpaper in clean water for 10-15 minutes, and then brush the glue.

4.Brush the bottom film first and then scrape the putty.

Brush a layer of bottom film on the wall, the thickness is moderate, and then scrape the putty, polishing, just like the process before painting, the purpose of brushing putty is to make the wall more smooth and prevent the wall from absorbing the glue of the wallpaper, so that the wallpaper can be more firmly posted on the wall.

5.Wallpaper glue treatment.

Wallpaper glue is uniform, can not be piled up, colleagues should also pay attention not to stain the wallpaper, after the coating should be brushed over the glue surface to fold in half, placed for about 3-5 minutes, to prevent the glue surface from drying too quickly and affecting the use. In addition, when painting glue on the wall, the width should be wider than the wallpaper, and some space should be reserved for it.

6.Crop the wallpaper.

Before cutting the wallpaper, now it is necessary to cut the wallpaper, measure the scale before cutting the wallpaper, and maintain the symmetry of the wallpaper when cutting, so as to make the final effect more beautiful.

7.The last step – wallpaper.

It is actually very easy to change the latex paint wall to wallpaper. If the wall seeps water and becomes moldy, the leakage should be treated first before proceeding to the next step. If the bottom wall has hollowing and spalling.

It should be removed first, painted with solid wall, then scraped putty ash, and polished after drying. The wallpaper can be pasted after drying. If the wall is painted with latex paint on the wall is very good, just gently polish, sweep away the floating dust and brush the base film, and then paste the wallpaper after drying.

Knock on the blackboard, draw the key points, remember to brush the base film, be sure to choose the penetrating base film, do not use the ordinary base film, otherwise it is easy to have problems. Permeable base films are about half as expensive as ordinary base films.

Wall foundation leveling is generally mixed with gypsum and glue, the process is simple, and the general workers can operate. If the economic conditions allow or the requirements are higher, you can use the leveling putty, the special leveling putty is relatively environmentally friendly, but the construction process may be different, and the workers must be required to follow the construction instructions. Putty powder fine leveling is generally done twice, after the putty is dry, first test the flatness of the wall, and use a ruler to detect.

The next process can be carried out after marking. If the original wall is dark latex paint, if you want to decorate with light latex paint, you need to buy latex paint with strong coverage and paint it a few more times. You don't need to paint a primer during this process.

However, to prevent dark latex paint from not being covered, you can polish the wall before brushing and try polishing the dark paint of the original wall, but this requires a lot of labor. Alternatively, the coating test is carried out in a small local area first. If it can be covered, paint it directly.

Before pasting the wallpaper, the base film must be brushed. The normal base film is permeable, that is, it can penetrate under the putty powder layer to increase the strength of the wall, and has the characteristics of waterproof and mildew-proof. However, the strength of the wall coated with latex paint is already there, but it is not waterproof.

After the wallpaper is glued to the wallpaper, the paint film will expand in a short time. Therefore, this time the base film must be brushed, and the concentration should be increased.

Although it is not permeable, it must be waterproof. As long as the waterproof wallpaper glue is not wet, the walls will not swell. Before pasting wallpaper, the wall should be brushed with a base film, and a penetrating base film should be selected.

This base film is specially for latex paint walls, which can penetrate the putty layer to reach the wall, stabilize the firmness between the putty layer and the wall, brush back and forth several times, and then wait for the base film to dry completely. The latex paint wall can be directly pasted with wallpaper and wall covering, which is convenient and trouble-free, but the sequelae are also very large. Wallpaper can crack, blister, and fall off at any time.

No one can ** this question. Therefore, if conditions permit, it is recommended to shovel off the wall latex paint and paste the wallpaper from Xinping, which is both beautiful and safe, and it will be more assured to use.

The wall has been painted, and the latex glue can be wallpapered, but it may not be firm; It is necessary to brush another layer of ordinary paint on the wall, and to polish the cracks and cracks on the wall with putty.

Even if you paint latex paint, you can paste wallpaper; Be sure to wait for the latex paint to dry before pasting the wallpaper, and it is best to ask a professional to paste it, otherwise it will not look good and will greatly affect the image of the home.

You can put wallpaper, but you should choose some wallpaper that is easy to clean and does not stick to the wall, so that the wall is clean.

Yes, at this time you need to sanding the wall, and then a layer of glue will be used, so that you can paste the wallpaper.

As for the decoration of the house, especially for inexperienced owners, it is discovered after the decoration of the house, for exampleThe wall has been painted with latex paint, can you still paste wallpaper?In fact, many people will encounter such problems, let's take a look!

1. We all know that latex paint is water-based, it can be used after adding water, when placing wallpaper, the wallpaper also needs limb glue, and the glue also has moisture, if the latex paint has blisters, the surface of the wallpaper will expand.

2. Some latex-coated walls will dry and crack after a long time of use, the glue on the wallpaper is very sticky, directly pave the powder on the latex paint wall, and it will not make the wallpaper hard, but you can use the drawing wallpaper and look at the latex paint wall, although the wallpaper can be pasted after painting, but this way has high requirements for the wall.

3. First you need to inspect the wall, check whether there are defects or large cracks on the surface of the wall, and thoroughly clean the soiled wall to prevent the wallpaper from blistering in the future, and apply the wallpaper to the latex paint wall. Brush a layer of wall during operation, the film-base film is used to treat the wall and is an alternative to varnish, its function is to form a dense protective film on the wall, making the lower layer more durable, preventing the lower layer from breaking, and preventing the lower layer from seeping into too much moisture. It also prevents alkaline substances from escaping from the bottom layer and has the effect of prolonging the life of the wallpaper.

First of all, the surface of the wallpaper should be smooth and neat, in previous work, the wall should not only be polished and smooth, but also have obvious irregularities, the back of the wallpaper should be evenly coated, the wallpaper should be applied from the wall to the bottom in the vertical direction of the wall, and then it should be fired with a scraper, gently flattening the wallpaper until there are no bubbles or wrinkles.

Secondly, the pattern of the wallpaper must be consistent, the pattern must be clean, if the wallpaper pattern is not connected correctly, the space is too sudden and unreasonable, in terms of aesthetics, it is also a great offer.

Of course, when the wallpaper is placed, there are certain requirements for the wall, and there may be some special substances, etc., because these East and West will directly affect the wallpaper.

You can get it for free

Many homeowners think when renovating their new homeCan you still paste wallpaper on the wall after painting latex paint?？Is it reasonable to put wallpaper directly on the wall after applying latex paint? They are not only worried about whether it will be troublesome when pasting wallpaper, but also worried about whether there will be sequelae after pasting.

SoCan you still paste wallpaper on the wall after painting latex paint?

Actually, forCan you still paste wallpaper on the wall after painting latex paint?This problem is certain, the process of painting latex paint on the wall is more demanding than pasting wallpaper, and cracks and cracks must be filled with putty grinding. Wallpaper on the wall is not so demanding, because the wallpaper has a certain elasticity, and the wallpaper has a textured pattern, even if there are small problems with the base layer of the wall. Therefore, the wall can also be pasted with latex paint, and the latex paint itself has a moisture-proof function, so there is no need to worry about the adverse effects of latex paint on the wallpaper.

Zheng cavity. 1. Prepare the gadgets you need to use for wallpapering, and then measure the area of the wall. Generally speaking, tools such as scrapers, cutters, rollers, tape measures, glue, sandpaper, gloves, sponges, brushes, buckets, etc. are all necessary tools. Then measure the size of the wall to determine the size of the wallpaper to use.

2. Treat the wall. This is an important factor in determining the effect of pasting the wallpaper directly onto the latex painted wall. I hope everyone will be careful, in addition to removing dirt from the walls, if there are cracks in the walls, they should be filled with plaster powder.

By the way, the wallpaper on which the wall is pasted must be dry. You can do a film experiment, if there is no moisture, it is really dry, and then we can make wallpaper glue.

3. Crop the wallpaper. Customize the desired wallpaper size based on the length, width, and height of the wall that has been measured. As a reminder, this step is the most cautious in all the processes of posting wallpaper on latex painted walls, because it is necessary to make sure that the wallpaper is the same size and flower shape.

4. Paste wallpaper. After cutting the wallpaper, we started to paste the wallpaper from the corner. At the same time, use a scraper to scrape the paper to squeeze out the excess glue and make the wallpaper stronger. If the glue sticks to the pattern of the wallpaper, we can dry it with a sponge.

That's all for thatCan you still paste wallpaper on the wall after painting latex paint?This problem, I hope to help the owners in need, I hope everyone can decorate a beautiful and comfortable environment.

You can get it for free

It can be pasted, but under normal circumstances, it is not recommended to paste it directly, and it needs to be processed.

Paste wallpaper on the latex paint wall, the method is to remove the latex paint wall surface of the wallpaper part. It may be possible to stick it directly, but it will certainly not be secure. This is because the (firm) strength of wallpaper for the putty layer is higher than that of latex paint for the putty layer.

For the same putty layer, if you paste wallpaper, you need to brush ordinary paint on the wall first, or a special base film for wallpaper - used to strengthen the putty layer on the wall and increase the hardness of the putty layer, otherwise the wallpaper will not be firmly pasted. It is recommended that the best thing to do is to remove the latex paint wall of the wallpapered part, re-approve the putty and carry out the construction according to the requirements of the wallpaper.

However, there are exceptions where latex paint can be directly applied to the wall. Now there is a wallpaper interface agent on the market, as long as you use it, you don't need to carry out complex wall treatment. The wallpaper interface agent can make the surface of the base layer rough, make it easier to stick the wallpaper, and can also avoid problems such as blistering.

After we tear off the wallpaper, if it is not clean, there will be broken wallpaper on the wall, and if it is painted directly, the wall will be uneven and affect the appearance. Then some people will definitely ask, is it possible to apply latex paint directly after tearing off the wallpaper? No, because the discarded wallpaper that can be seen by the naked eye is indeed gone, but a layer of glue will be attached to the surface of the wall, and direct painting will affect the effect later.

After the wallpaper is torn off, there are several points that must be paid attention to when applying latex paint. The first thing is to tear off the wallpaper, and then remember to remove the glue. Because the wallpaper is generally composed of three layers of base film, wallpaper glue and wallpaper, in addition to the surface of the wallpaper can be directly torn off, the remaining two layers need to be shoveled off with tools, and these can be completely removed before the subsequent construction.

After the wallpaper glue on the wall is removed, we may find that the wall is uneven, and what we need to do at this time is to scrape the putty, and decide how many layers of putty to batch according to the smoothness of the wall. Then sandpaper is sanded, and when the wall is flat, you can apply latex paint.

After coating latex paint, we remember to check whether the wall has uneven color, if there are several times, it is worth noting that latex paint needs to be dried in the shade to avoid peeling and cracking in the later stage.