Is it common for Audi Q5 to burn engine oil, and does the 2013 model exist

The professional saying of burning engine oil is that in order to improve the power and speed power characteristics of the engine, the matching gap between the piston and the cylinder block is increased, so that part of the engine oil is channeled into the combustion chamber for combustion, resulting in excessive use of engine oil. Be sure to remember to add it in time, otherwise poor engine lubrication will cause abnormally large wear and reduce service life, and Bunsen may not have a good manufacturing process in China, so there is a problem with the piston fit. I'm a rookie automotive engineer. Thank you.

The common problem of domestic Audi is to burn engine oil.

The engine of the Audi car is relatively easy to burn the engine oil, which is a design loophole of the designer, and many German cars have this problem, and you are not alone.

First of all, you need to confirm the reason for burning engine oil, and the main reasons for burning engine oil are two aspects.

First, there is a problem with the accessories, the waste gas valve, the valve seal, the cylinder is pulled in the cylinder, and the cylinder pressure is insufficient.

The second is that the oil circuit is not cleaned for a long time, the antifreeze is not replaced in time, the oil service life is too long, and the piston ring is stuck, and the more common situation is that the piston ring is stuck.

Causes of piston ring seizure.

In fact, the treatment principle of piston ring stagnation should start from the oil circuit, the reason for the stagnation is the beginning of the oil circuit, the oil bearing temperature is 110 degrees, and the high temperature caused by the long-term unclean oil circuit makes the oil at a temperature of 120 degrees or higher for a long time, so that the oil will be exhausted in advance, the small hole of the oil ring is very small, and the oil inside will be dried and scabbed for a long time, and a cylinder stuck is 5000 kilometers of a liter of oil, at this time, the working conditions of other cylinders will also begin to be bad, and soon the 4 cylinders will be stuck. It becomes a liter of engine oil for 1000 kilometers or even hundreds of kilometers. Therefore, in order to solve the problem, we must start from the root oil circuit, which is the way to remove the root.

The solution to burning engine oil in Audi cars.

First of all, you need to check the accessories. If it is a damage to the accessory, the accessory needs to be replaced. Check if there is a serious problem with the cylinder. If there is a serious situation of pulling the cylinder, you can directly choose to overhaul the engine and replace the middle cylinder. If there is no pull cylinder or slight pull cylinder, you can do not rush to overhaul it first.

Burning engine oil is not a terminal disease, there is a way to solve it, and it is not necessary to overhaul the engine. Overhaul is self-evident on engine damage, and many car owners will still burn engine oil after overhaul. At present, the solution to the problem of burning engine oil has matured, so there is one more option for the treatment of burning engine oil!

As long as you use the general burning oil repair agent for 4 times in a row and drive more, you can clean the carbon deposits on the top of the piston and release the piston ring.

Solutions to Audi burning engine oil link.