Which is the best organic waste gas treatment? Which is the best exhaust gas treatment?

Enterprises with a good reputation in the organic waste gas treatment market include Tiandeyi Industry, Suzhou Industrial Park Santi Clean Equipment, Jiangsu Middle Road Environmental Protection, Jiangsu Haisilo Waste Gas Treatment Equipment and Hebei Tianlong Environmental Protection Technology.

1. Tiandeyi Industry, the advantage of Tiandeyi Industrial Organic Waste Gas Treatment and Treatment is the method of paying equal attention to process control and end treatment, estimating and measuring the organic waste gas treatment emissions of enterprises implementing organic waste gas treatment and emission reduction, and independently developing a set of advanced organic waste gas treatment and treatment technology, and the purification efficiency far exceeds the national standard.

2. Suzhou Industrial Park Santi Clean Equipment, Suzhou Industrial Park Santi Clean Equipment has the advantage that the company has special equipment for making a series of filter waste gas treatment equipment, strictly implements the IS09001 quality system, and each process has strict operating procedures and specifications, bringing together a group of senior technical personnel specializing in the development and research of waste gas treatment equipment for purification products.

3. Jiangsu Zhonglu Environmental Protection, Jiangsu Zhonglu Environmental Protection is the use of molecular sieve runner or activated carbon bed adsorption and concentration and then desorption, organic waste gas treatment using direct combustion method, the use of gas or fuel oil and other auxiliary fuel combustion, the exhaust gas heating through catalytic combustion into harmless and odorless carbon dioxide and water, when the adsorption saturation, activated carbon desorption and regeneration, the exhaust gas is blown off catalytic combustion.

4. Jiangsu Hisler waste gas treatment equipment, Jiangsu Hisile waste gas treatment equipment has the advantage of introducing and absorbing Israel, South Korea, Australia, the United States and other countries, and at the same time closely strengthening cooperation with research institutions, and has formed low-temperature plasma purification equipment, photocatalytic oxidation equipment, activated carbon adsorption equipment, waste gas purification, spray scrubber and catalytic incineration process as the characteristics of waste gas treatment.

5. Hebei Tianlong Environmental Protection Technology Co., Ltd., Hebei Tianlong Environmental Protection Technology Co., Ltd. has the advantage of independent research and development of the first wind collection energy-saving catalytic oxidation technology, which reasonably supplies the heat of the exhaust gas discharged from the oven to the auxiliary heating device, which reduces the energy consumption of the enterprise, and the total amount of waste gas emitted by the enterprise has also been greatly reduced, thereby reducing the initial investment of the back-end organic waste gas treatment waste gas treatment waste gas treatment device.

Norlan Hi-Tech. Jiangsu Nuolan Environmental Protection Technology Co., Ltd. (brand Nuolan Hi-Tech), a leading supplier of environmental protection equipment and core materials, is a new type of environmental protection enterprise integrating R&D, production, design and sales. The company's core products include molecular sieve adsorption concentration runners, VOC catalysts, RTO (multi-chamber, rotary) equipment, TNV equipment, SCR towers, etc.

Independent research and development, design and improvement of intelligent production lines, mastery of core technology, with concentrated molecular sieve adsorption runner and SCR catalyst modern production workshop, the production process of the product has a complete monitoring system and inspection standards, the key indicators of the product have met the requirements of the industry. At present, Jiangsu Nuolan's products have been successfully applied to a number of large-scale environmental protection projects, and the operation effect has been verified.

At present, at home and abroad, for industrial waste gas treatment, organic waste gas treatment methods mainly include physical method, chemical method, biological method, including adsorption, direct combustion, catalytic combustion, chemical oxidation, biological filter and other treatment methods, at this stage, China's current organic waste or gas treatment process mainly includes: isolation method, combustion method, absorption method, condensation method, plasma low-temperature catalytic oxidation method, adsorption method, etc.

1. Organic waste gas treatment isolation method:

It is a special filter material, placed in the exhaust gas discharge process, and mechanically isolated, so as to achieve the effect of waste gas treatment.

2. Organic waste gas treatment and combustion method:

The organic waste gas is directly burned by heating at high temperature to achieve the purpose of waste gas purification.

3. Organic waste gas treatment and absorption method

The absorption liquid and the exhaust gas are in contact with each other, so that the harmful substances in the exhaust gas are dissolved into the absorption solution, so that the exhaust gas can be purified. The absorbent solution is treated separately.

4. Condensation method at organic waste gas:

Through condensation cooling, when the temperature is lower than the condensation point of the harmful substance, the gaseous harmful substance is converted into a liquid state, separated from the air, and thus purified.

5. Isoplasmic low-temperature catalytic oxygen shirt equalization method:

Plasma is the fourth state of matter in addition to solid, liquid, and gaseous states, and has electrically neutral and high conductivity in the macroscopic degree. Plasma contains a large number of active electrons, ions, excited particles, and photons. As a result of the collision of these active particles and gas molecules, a large number of strong oxidizing free radicals O·, Oh·, Ho2 and highly oxidizing O3 are produced. Organic molecules are excited by high-energy electron collisions and atoms break to form small fragment groups or atoms. O·, Oh·, Ho2, O3, etc. react with excited atoms, organic molecules, groups, free radicals, etc., and finally oxidize and degrade organic molecules into CO, CO2 and Ho2.

6. Adsorption method of activated carbon adsorption device:

The residual energy of the large surface at the molecular level such as porous activated carbon, silica bath earth, anthracite and so on is used to adsorb organic gas molecules to its surface for purification.

Which is the best exhaust gas treatment? We generally treat exhaust gases, I think it's still uh this. The EPA handled it relatively well.

Scope of application of painting waste gas treatment and purification project: This standard stipulates mechanical and electrical equipment.

At present, there are more domestic waste gas treatment equipment sellers, but there are very few manufacturers, and there are very few manufacturers who master the core technology of waste gas treatment.

Which exhaust gas treatment is better, this is a thing that many manufacturers want to know. Hunan Sunhomei is a professional waste gas treatment manufacturer in South China, the company has been committed to waste gas treatment services for 15 years, providing customers with one-stop service of on-site investigation, design scheme, equipment manufacturing, installation and acceptance, and after-sales service.

Which one is better for gas treatment? Waste gas treatment or to find a professional company waste gas treatment group, to pay attention to environmental protection can not reach the standard base or mu standard, is not allowed to treat, so it is still necessary to choose a standard.

What is the specific content of the prospect of organic waste gas treatment technology, the following Zhongda Consulting will answer for you.

Air purification technology: Air pollution is one of the most prominent environmental problems in China, and industry is an important air pollutant. A large amount of industry is discharged into the atmosphere, which will inevitably cause the quality of the atmospheric environment to deteriorate, bring serious harm to the human body, and cause huge losses to the national economy.

The most difficult thing to deal with in the industry is that after entering the human body through the respiratory tract and **, it can cause temporary and permanent lesions to human or residual respiratory, blood, liver and other systems and organs, especially benzopyrene polycyclic aromatic hydrocarbons can directly cause cancer to the human body, which has attracted great attention from human beings. In industrial production, various organic waste gases will be generated, mainly including various hydrocarbons, alcohols, aldehydes, acids, ketones and amines; These will cause air pollution, harm the human body, and cause waste, so the treatment and purification of organic waste gas is imperative. In general, there are two main types of organic waste gas treatment methods:

One is the law. The method is to separate volatile organic compounds (VOCs) by physical methods at a certain temperature and pressure, with selective adsorbents and selective destruction or selective permeable membranes, mainly including activated carbon adsorption, pressure swing adsorption, condensation and biofilm methods. The other type is the elimination methodThe elimination method is to convert organic matter into water and carbon dioxide through chemical or biological reactions, using light, heat, catalysts and microorganisms, etc., mainly including thermal oxidation, catalytic combustion, biological oxidation, corona method, plasma decomposition method, photodecomposition method, etc.

Organic waste gases can be treated in the following ways:

1.Biological treatment method: the use of microorganisms to decompose organic substances into inorganic substances to reduce pollutant emissions. This method is suitable for applications with low concentrations of organic waste gases, such as the treatment of household organic waste using zero-emission technology.

2.Adsorbent method: use activated carbon, zeolite and other adsorbents with good adsorption performance to adsorb pollutants in organic waste gas to achieve the purpose of purification.

3.Catalytic oxidation method: the catalyst is used to oxidize the harmful substances in the organic waste gas into carbon dioxide and water to reduce the emission of the organic waste gas. This method is suitable for the treatment of high-concentration organic waste gases, such as industrial waste gas treatment.

4.Pyrolysis method: the organic waste gas is heated to a certain temperature to decompose it into harmless substances, which can achieve the purpose of purification.

5.Steam regeneration method: the organic waste gas is in contact with the water through spraying, the organic matter is dissolved in the water, and heated again for regeneration, so as to achieve the purpose of purification.

The above methods have their own advantages and disadvantages, and the specific application needs to choose the most suitable treatment method according to the characteristics of the exhaust gas, the treatment effect and the cost.

Hello. Organic waste gas treatment is also very simple and cumbersome. First of all, you want to tell you about the composition of your exhaust gases. If you don't know the ingredients, you can tell me how the exhaust gas is generated. (How does the exhaust gas come from).

There are also local environmental protection requirements for waste gas treatment or in accordance with the national standard.

Different regions have different requirements for treating the same exhaust gas.

To put it simply, there is a big difference between the treatment methods of painting waste gas and chemical waste gas. The treatment methods used and the processing equipment are different. It depends on the exhaust gas itself.

Hello landlord, according to the questions you raised, the following will be answered in detail for you:

According to the principle of VOCs organic waste gas generation in the atmosphere and the physical and chemical properties of VOCs organic waste gas, its control technology can be divided into two categories, process control and terminal control.

Process controlIt is aimed at the production process of VOCs, and reduces the generation of VOCs from the principle of VOCs, which is generally achieved through process improvement, technological transformation and leakage control.

End controlAccording to the chemical characteristics of VOCs, it focuses on the treatment of VOCs waste gas, and uses combustion, decomposition and other methods to control the emission of VOCs.

Thermal destruction method

Thermal destruction method refers to the direct and auxiliary combustion of organic gases, that is, VOCs, or the use of suitable catalysts to accelerate the chemical reaction of VOCs, and finally achieve a reduction in the concentration of organic matter, so that it is no longer harmful. 、

Adsorption method

The adsorption method in organic waste gas is mainly suitable for low-concentration and high-flux organic waste gas. At this stage, the treatment method of this organic waste gas has been quite mature, the energy consumption is relatively small, but the treatment efficiency is very high, and it can completely purify the harmful organic waste gas.

Oxidation

Oxidation method is the most suitable treatment technology and method for toxic, harmful, and does not require the best VOCs. The basic principle of the oxidation method: VOC and O2 oxidize to form CO2 and H2O, which is similar to the chemical combustion process, but due to the low VOC concentration, there will be no visible flame in the chemical reaction.

Condensation method

At different temperatures, the saturation of organic substances is different, and the condensation method uses the characteristics of organic matter to play a role, and extracts the organic substances in the steam environment by condensation by reducing or increasing the system pressure.

Organic waste gas disposal is rightleder refers to the disposal of conductive, filter, and purification of organic waste gas generated in the industrial production process. Generally, organic waste gas disposal includes formaldehyde organic waste gas disposal, benzene, toluene, xylene and other benzene organic waste gas disposal, acetone butanone organic waste gas disposal, ethyl acetate waste gas disposal, oil mist organic waste gas disposal, furfural organic waste gas disposal, styrene, acrylic acid organic waste gas disposal, resin organic waste gas disposal, additive organic waste gas disposal, paint mist organic waste gas disposal, Tiannashui organic waste gas disposal and other organic matter air purification and disposal.

Organic waste gas generally does not have the characteristics of flammable and explosive, highly toxic hazards, no aqueous solution water, aqueous solution organic solvent, and difficult disposal. In the disposal of organic waste gas, various principles such as organic waste gas activated carbon conductive disposal method, catalyst spontaneous combustion method, catalyst hydrolysis method, acid-base neutralization method, plasma method and so on are widely used. Generally, it is recommended for the plasma method, because the low-temperature plasma method has the characteristics of high removal efficiency and easy use.

The best organic waste gas disposal method is the catalyst hydrolysis purification system, and the waste gas disposal design is thorough, and the filter exhaust gas is purified layer by layer, and the effect is better.

If you are looking for waste gas treatment, I recommend finding a manufacturer with rich professional experience, because this can reduce your time and cost, and can give you a lot of suggestions on how to solve the waste gas and meet the emission standards.

At present, the state control environment is quite strict, and fines of hundreds of thousands or millions are imposed at every turn, so environmental issues are extremely important.

Personal suggestion: In this regard, I suggest you look for manufacturers in the Kunshan area, Aunason Environmental Protection Company focuses on waste gas treatment and provides one-stop solutions, you can consider it.