In addition to washing machine sink cleaner, is there any other good way to clean the washing machin

Of course, there are other ways. But the cost performance and ease of operation are different.

Some machines come with a barrel cleaning program, but it's really just talk.

The washing machine barrel itself has been working in a detergent-soaked environment for a long time, and it is simply self-cleaning without adding any additives, and it is impossible to really clean the inner cylinder. Let's see how dirty the inner drum of the washing machine is when disassembled.

Today's cleaning machines, such as high-temperature steam cleaning, are indeed good, they can sterilize + clean, but the premise is to disassemble the machine, which is not too troublesome for ordinary people.

In addition, there are also ultrasonic cleaning equipment, such as those used to clean glasses in optical stores, and of course, the equipment used to clean washing machines must be much larger than this. After all, the washing machine is too large. Buying expensive, huge equipment for the occasional cleaning of the inner drum of the washing machine is, of course, more than worth the cost.

So, for now, using a detergent is the most appropriate.

Washing machine sludge dissolving bactericidal paste.

Washing machine sludge dissolving and sterilizing paste is a new type of cleaning agent specially developed by Chengdu Hengfeng Hongye Detergent Factory to dissolve the long-term sedimentation sludge in the inner barrel of the washing machine and kill various bacteria and viruses in the sludge. It has the following characteristics:

1. Special features:

1. Quickly dissolve sludge, which can quickly dissolve the sludge and dirt that has been precipitated for a long time in the barrel of the washing machine.

2. Rapid sterilization and detoxification, which can quickly kill all kinds of bacteria and viruses in the sludge of washing machines.

Second, how to use.

1. Process: Fill the washing machine with water, put 2 kg of washing machine sludge dissolving bactericidal paste into the washing machine, turn on the washing machine and stir for ten minutes, let the washing machine sludge dissolve and dissolve the sterilization paste, disperse and dissolve, then soak for 1-2 hours, and finally open all the automatic washing procedures of the washing machine to complete the sludge removal.

It is recommended to use disinfectant, the pollution of the washing machine sink is mainly caused by the accumulation of dirt and bacteria breeding, and pouring disinfectant into the washing machine before washing clothes can prevent bacteria from contaminating the clothes.

The washing machine has a long soaking time of detergent and has no damage to the washing machine.

Because the inner barrel and other parts of the washing machine are generally made of polypropylene material, in addition, the rest of the mechanical parts of the washing machine are also made of stainless steel, and the comprehensive performance such as corrosion resistance is better.

The cleaning effect is best when the detergent is soaked for 10 hours, after 10 hours, the cleaning function will be under the curve, because the active ingredients in the detergent will gradually lose their effectiveness, so it is best to soak for 2 to 3 hours after cleaning.

1. First of all, slowly pour the detergent into the inner cylinder of the washing machine, as shown in the figure below;

2. Choose a separate washing program and fill with one-fifth of the water. If conditions permit, manually add about 40 to 60 degrees of warm water to the high water level, as shown in the figure below;

3. Let the machine run for 5 minutes, then turn off the power and soak for 1 hour (when the first use or when the dirt is serious, soak for 2 3 hours), as shown in the figure below;

4. Then wash it again according to the standard mode of washing machine day. (Washing, rinsing, dehydrating), as shown in the figure below;

Steps to use drum washing machine cleaner:

1. First of all, slowly pour the detergent into the inner cylinder of the washing machine, as shown in the figure below;

2. Choose a separate washing program and fill with one-fifth of the water. If conditions permit, manually add about 40 to 60 degrees of warm water to the high water level, as shown in the figure below;

3. Let the machine run for 5 minutes, then turn off the power and soak for 1 hour (when the first use or when the dirt is serious, soak for 2 3 hours), as shown in the figure below;

4. Then wash it again according to the standard mode of washing machine day. (Washing, rinsing, dehydrating), as shown in the figure below;

Notes:

The dirt in the inner drum of the washing machine is composed of limescale in the water, free matter in the washing powder, cellulose content of the clothes, organic matter in the human body, and dust and bacteria carried by the clothes, which will firmly adhere to the interlayer of the washing machine. So the washing machine should be washed after a period of use.

1. Remove the filter screen (or storage box) of the washing machine first, and pour the product into the inner cylinder of the washing machine;

2. Add water to the highest water level and run for 10 minutes to fully dissolve the product;

3. Turn off the power and soak for 1-2 hours;

4. Turn on the washing machine and clean it according to the normal washing standard mode, you can observe a large number of bubbles and dirt floating on the water surface;

5. Drain the sewage and rinse it with clean water.