How to remove the odor of the sealing ring of the thermos cup?

The effect of deodorization is particularly prominent. Put the tea leaves into the cup, put them upside down and put them for half an hour, so that the tea leaves react with the silicone ring on the lid, which can not only have a cleaning effect but also play a good deodorizing effect, and can improve the odor after repeated operations several times.

2. White vinegar: add an appropriate amount of edible salt.

Put the white vinegar into a cup, stir it up and down, shake it evenly, and then turn it upside down for about 10 minutes, bring out the contents of it, and then soak it in hot water for a period of time and wash it with a little detergent.

3. Salt water: Pour boiling water, table salt and orange peel into the cup.

Wait until it is well stirred, put it directly on the table and invert it for 2 hours, let the silicone ring be fully soaked, pour out the salt water, and then soak it in boiling water for one night.

The above are some ways to remove the odor of the silicone ring of the thermos cup, when you buy a new thermos cup, you can use the above methods to deal with it, which can reduce the odor of the rubber ring, but if the odor cannot be removed through the above methods, it is likely that the material of the silicone is not so good, and it is not recommended for you to use it.

1. Generally speaking, the rubber ring is not toxic, and the reason why it has a taste is because the quality of the rubber ring is not very good, and it only needs to remove the odor to be used normally. Add tea leaves to the newly bought thermos cup, then pour a full amount of boiling water, cover the lid, let it stand for a few hours and brush it clean.

2. Or you can also clean it with detergent, then pour hot water into the cup and cover it, put it until the water cools and then pour out the water, and then leave it for a period of time, and the smell of the rubber ring can basically be removed.

How to remove the odor of the sealing ring of the thermos cup? Generally, there is a smell in the newly bought thermos cup. You can wash it off with clean water.

Blanch it with boiling water. Rinse again with clean water. Put tea leaves in a thermos cup and pour boiling water.

After using it twice, there is no peculiar smell.

There is a rubber ring inside the thermos cup, and the solution to the dirt and strange smell: Material preparation: a basin of boiling water, dish soap, white vinegar, toothbrush, chopsticks.

Step 1: Pour an appropriate amount of white vinegar into a basin of boiling water (white vinegar has a sterilizing effect, and white vinegar contains acetic acid, which has the effect of removing odors). Step 2:

Then squeeze an appropriate amount of dish soap into the basin (wash.

You can make a cup of strong tea, and the taste is gone.

1.Method: After brushing the cup, pour in the salt water, shake the cup a few times, and let it sit for a few hours. Don't forget to turn the cup upside down in the middle so that the salt water can soak the whole cup throughout. Wash it clean at the end.

2.Find a tea with a stronger taste, Pu'er tea or the like, fill it with boiling water, let it stand for an hour, and then brush it clean.

3.Brush the cup clean, place the lemon or orange in the cup, and tighten the lid.

Three or four hours, then brush the cup clean.

4.Brush the cup with toothpaste and wipe it clean.

1.First of all, if you want to remove the odor of the rubber ring in the lid of the cup, you can use the kind of white vinegar we usually use, white vinegar can have a good effect of sterilization and deodorization, after the cup is full of vinegar, cover the lid and wait for about 30 minutes.

2.Secondly, there is another way to use toothpaste. First squeeze a little paste on the toothbrush, then wash the bottle and then use the toothbrush to brush the bottle and the cap together, after brushing, the smell will be gone, this method is very practical.

3.Finally, there is another way is that we can use the leftover tea water, the tea also has the effect of removing the odor, and the tea is very effective in removing the odor, it is recommended that you can use this method, pour the tea into the bottle and cover the lid for a day.

1. Remove the sealing ring for cleaning, if it cannot be removed, you can use a small brush or cotton swab to clean the dirt. Dirt is a big part of the smell in your cup, so be sure to brush it clean.

2. After cleaning with dish soap, boil with boiling water for a few minutes, and put it in a dry place to disperse the smell. The ingredients in dish soap remove odors.

3. Squeeze the toothpaste on the toothbrush, brush the bottle and cap together, and then wash it with water. The mint ingredient in the toothpaste eliminates odors.

4. Soak in the usual white vinegar for an hour or two. Because the main ingredient of white vinegar is acetic acid, it has a good effect of sterilization and deodorization.

5. Soak the silica gel ring with strong tea water, and the tea also has the effect of deodorizing.

6. Buy an activated charcoal packet and put it in a cup and cover tightly for a few hours. The surface of activated carbon has many tiny pores that can adsorb gases.

7. Put the lemon peel or orange peel in a cup, tighten the lid tightly, and let it sit for a few hours. Orange peel lemon peel has pores on the surface, which can also absorb odors.

The thermos cup has a taste, because it is used more in daily life, and the food residue is left in the thermos cup, which will produce a peculiar smell at this time, so how to remove the peculiar smell in the thermos cup? Let me take you to find out.

1. Boiling water to remove odor: clean the cup, pour boiling water, leave it overnight, pour out the water the next day, and clean the cup again.

2. Vinegar to remove odor: clean the cup, dilute it with a few drops of vinegar in warm water, pour warm water into the cup, leave it in the state of opening the lid for half an hour, and then pour out the water and clean it.

3. Milk odor removal: clean the cup, pour 2 3 tablespoons of fresh milk into the cup, tighten the lid of the cup, shake the cup for about a minute and then clean the cup.

4. Orange peel and lemon slices to remove odor: clean the cup, put fresh orange peel or lemon slices into the cup, cover the lid and leave it overnight, pour it out and clean it the next day.

5. Tea to remove peculiar smell: clean the cup, put tea leaves into the cup, pour boiling water, make strong tea, leave for about 3 hours, pour out the tea and clean it.

<><How to skillfully remove the odor of a thermos cup

1. Baking soda to remove the odor of the thermos cup: Pour hot water into a teacup, add baking soda and dates, shake, leave for a few minutes and then pour it out, and remove all the odor and scale.

2. Salt water to remove the odor of the thermos cup:Prepare the salt water, pour it into a teacup, shake it and leave it for a while, then pour it out and rinse it with water.

3. Toothpaste to remove the odor of the thermos cup:Toothpaste can not only remove oral odor and clean teeth, but also remove odor in the teacup.

4. Boiling to remove the odor of the thermos cup:You can put a stool or teacup in tea and boil it for 5 minutes, then wash it with water and dry it, and there is no odor at all.

5. Orange peel to remove the odor of the thermos cup:Wash the inside of the cup with detergent, then put the fresh orange peel into the cup, tighten the lid, leave it for about four hours, and finally clean the inside of the cup. Orange peels can also be replaced with lemons, in the same way.

6. Milk to remove the odor of the thermos cupPour half a cup of warm water into the teacup, pour a few spoonfuls of milk, shake gently, leave for a few minutes and then pour it out, and then wash it with water to remove the odor.

Misunderstandings about the use of thermos cups:

Make tea in a thermos mug

Tea is easy to rancidity and taste in a high-temperature environment for a long time, tea polyphenols, vitamin C and other nutrients in tea will be lost, and nutrients such as protein and sugar in tea will also become a hotbed for bacteria and mold growth.

The thermal insulation effect of the thermos cup has always been very good

The thermal insulation effect of the thermos cup will gradually deteriorate with the increase of time, because the general vacuum can not reach the absolute vacuum, so the getter will be added to the cup to adsorb the residual air, and the getter will have a "shelf life", and the natural heat preservation effect will become worse after the quality assurance.

Foreign brands are better than domestic brands

The domestic brand of the thermos cup and the foreign brand, the insulation effect is not as great as everyone imagined, after all, the vacuum is not how great the technology, of course, the quality control is not strict and the technical aspects are not particular is a common problem in China, details determine the quality! As the saying goes, you get what you pay for, but compared with domestic thermos cups, the first of foreign brands of thermos cups is often several times that of domestic brands, but the thermal insulation effect may only be more than 2 hours.

The thermos cup is to keep warm all the time

The length of the insulation time does represent the advanced production process of the thermos cup, but the ordinary thermos cup does not need so long the heat preservation effect, just imagine if you find that the water in the cup is still hot after a morning of office, why can the heat preservation time of the general small-capacity thermos cup be slightly shorter than the heat preservation time of the "bullet" type thermos cup that we often say.

Method 1: Squeeze the toothpaste on the toothbrush, then brush the sealing ring and cup, and then rinse with water. Method 2:

Remove the seal and wipe with an alcohol swab until the dirt is wiped clean. Method 3: Replace the new sealing ring and directly install the new sealing ring and fix it.

The rubber seal is an annular cover composed of one or several parts, which is fixed on one ring or gasket of the bearing and is in contact with the other ring or washer or forms a narrow labyrinth gap.

Rubber seals are used to penetrate into various mechanical equipment, and play a sealing role in static or moving states in the specified temperature and pressure and different liquids and gases.

Rubber sealing rings are divided into O-ring series, Y-shaped sealing rings, V-shaped sealing rings, YX-type sealing rings for holes, and YX-shaped retaining rings for holes.