How to make crab fishing tools and what tools to use for crab fishing

Take a two-meter-long bamboo pole and tie a fishing line and rope on it, so that you can complete the tool for making crab fishing, and then put a little lean meat underneath it, tie her up, and then put it where there are crabs, and then lift that lean meat up, or shake it, so that the crabs can see, and then the crabs will come and eat.

Crab fishing with crab pockets and crab rings.

As a crab fishing tool:

1. Crab pocket: Tie a triangular frame with thin bamboo, use a rope net to form a block-like triangular net in the frame, buckle 3 40 cm long tethers at the triangle, buckle 1 total tether about a meter long at the upper end of the 3 tethers, and tie a small wooden board or small wooden stick to the upper end of the total tether as a buoy.

2. Crab ring: use the wire machine to form a "lap" ring, the wire head is filed in advance in order to poke two whole large earthworms, the bait ring is made into a live buckle with 3 nylon threads and divided into triangles buckled on the bait ring, the total tether on the upper side is meters, and the upper end of the total tether is tied to the buoy.

Fishing Tips:

1. Bait: Crabs mainly feed on aquatic plants, humus, animal carcasses, aquatic insects, etc. in the natural environment, and it is better to use meat bait for crab fishing, such as frog legs, animal offal, pig liver, earthworms, etc.

2. Fishing spots: Crabs like to inhabit the mud banks of rivers and lakes or the caves of tidal flats, and often hide in gravel and aquatic grasses.

Practical Fishing Methods:

1. Rod fishing method: use a slightly elastic bamboo rod to tie a line rope on the tip of the rod, tie the bait to the tail of the rope, and then throw the bait into the water to sink to the bottom.

2. Net fishing method: cut a triangle with a piece of fine wire yarn, tie a lead wire on each corner, connect the three lead wires with a thick wire rope, place frogs, chicken and duck intestines, red wheat ears, etc. on the screen and fix the net on the net with a thin line, and then gently put the net into the water.

3. Cage lure method: weave into a cage with fine lead wire or bamboo stalk, leave an inlet at the bottom or side, the inlet is a trumpet type, large outside and small inside, barbed around the periphery, crabs can enter and cannot get out, bait such as chicken and duck intestines, sorghum ears, frogs and other baits are placed in the cage, and then the cage is put into the water.

Common crab fishing tools include crab sets, fishing rods, and fishing nets, and the production methods of different tools are different, such as the fishing rod needs to tie the nylon line to the top of the bamboo rod, and then tie the frog meat, chicken or other bait at the end of the line, so as to complete the production of the simple mu slow and easy fishing rod.

The crab set is made by bending the wire into a circle, and then fixing a wire in the middle of the circle. After that, prepare 6 nylon threads of equal length, pass the nylon threads through the iron coil and tie them into a circle, and finally tie the bait such as frog meat and chicken to the wire in the middle of the iron coil.

To make a fishing rod for crabs, prepare a bamboo rod, nylon line, and bait. The specific method is to tie the nylon line to the top of the bamboo pole first, and then tie the frog cherry meat, chicken and other bait at the end of the line, you can put the tied bait into the water and wait for the crab to eat the bait.

The production method of the fishing net needs to first enclose the wire into a cube with a side length of about 20 cm, do not need the top of the cube, and then tie a 150 cm nylon line to each side of the top surface of the cube, and then intersect the nylon line 50 cm upward, and put bait such as chicken and duck meat into the cube, which can be used to fish for crabs.

1. First of all, prepare the thick iron wire and fishing line.

2. Bend the thick wire into a circle, leaving a section to cross from the middle.

3. Tie a dead buckle on the thick wire with a fishing line, and then tie a live buckle after leaving a section of the letter. Then go around the wire and tie a live buckle.

4. Each live buckle is wound from the iron wire and the adjacent nylon thread to form a chain of buckle nuclear collision shouts. Tie all the lines around the wire loop.

5. Put a crab bait on the horizontal wire in the middle, and when the crab goes to eat, its feet will be wrapped around the nylon line and it will not be able to run away.

1. Rod-and-rod fishing. Tie a meter-long rope to the top of several bamboo poles of about 1 meter, and tie a small piece of fatty pork to the end of the rope as bait, or frog legs, chicken and duck offal. After that, the bait is put into the water to sink to the bottom, and when the rope is straightened, slowly lift the rod to pull the crab out of the water, and when the crab is about to come out of the water, the net can be quickly caught from under the water.

2. Net fishing. Cut the wire yarn into a square with a side length of about 50 cm, tie a lead wire of about 1 meter on each corner, screw the lead wire upward, tie a thick rope at the intersection of the lead wire, and then connect the rope with the center of a foam board, and then put the bait such as frog meat, chicken and duck intestines fixed with the string on the gauze net, and quickly lift the net when the crab eats the bait.

3. Lamp illumination method. The lighting method needs to be carried out at night, because crabs like to haunt at night, and especially like to haunt the river bank, at this time, you can set up a light source not far from the river bank, and use the characteristics of crab phototaxis to attract them to the light source, and then quickly catch crabs.