What are the characteristics of the material of Asian cables?

1. Fire resistance: The two materials used in this cable, copper and magnesium oxide, are inorganic, so this kind of cable will not burn and will not support combustion. The copper sheath melts at 1083, while the magnesium oxide insulation cures at 2800.

2. High operating temperature: the cable can withstand continuous operation temperature up to 250. However, in the event of an emergency, the cable can continue to operate for a short period of time at a temperature close to the melting point of the copper sheath.

3. Long life: The inorganic materials in this cable can ensure the stability, long life and fire resistance of the cable.

4. Explosion-proof: The highly compacted insulating material in this cable prevents steam, gas, and flame from passing between the equipment parts connected to the cable.

5. Waterproof: Due to its seamless metal sheath, the mineral insulated cable can continue to operate even when soaked in water.

6. High mechanical strength: This kind of cable is strong and durable, and can withstand severe mechanical damage without damaging its conductivity.

7. Grounding: For this kind of cable, an independent grounding wire is not needed, because the copper sheath used in this cable has played the role of a grounding wire, which can provide excellent low grounding resistance.

8. High corrosion resistance: The copper sheath of this cable has high corrosion resistance, and for most devices, it does not need to take additional protective measures. However, the copper sheath of the cable is susceptible to chemical corrosion, and in places with serious industrial pollution, the mineral insulated cable should be protected by a plastic outer sheath.

The biggest feature of Asian cable products is that the conductor materials are all made of high-purity oxygen-free copper, so the electrical performance is stronger than that of general wires and cables.

If you want to buy Asian cables, here are some possible routes:

Buy directly from Asian cable manufacturers or merchants. You can find information about products and purchases on the official website of the Asian cable manufacturing state. Alternatively, you can also get product information and make a purchase through a cable dealer or distributor in Asia.

Buy from your local cable seller. You can get information about Asia Cables through your local cable dealer or seller and make a purchase.

Buy on the Pants Thrill International** platform. You can buy Asian cables through international** platforms such as Alibaba, JD.com, Amazon, etc. There are usually multiple suppliers on these platforms that provide different specifications and models of cables, and you can choose according to your needs.

No matter which way you buy Asian cables, it is recommended to fully understand and compare the products first to ensure that the quality and specifications of the cables purchased meet your own requirements. In addition, pay attention to the choice of high credibility, good after-sales service of the best business.

It is understood that the insulated wires and cables of Asia Cable can be roughly divided into:

1. Household insulated wires and cables: copper core lifted cross-linked polyethylene insulated wires, copper core PVC insulated PVC sheathed flat cables, PVC insulated PVC sheathed round electric shackling local cables, copper core PVC insulated flexible wires, PVC and ethylene insulated cables (wires).

2. Power cable insulation: main circuit power cable for frequency converter, XLPE insulated power cable, PVC insulated power cable, 35kV and below XLPE insulated power cable.

3. Control cable insulation: polyethylene insulated PVC sheathed intrinsically safe circuit Ningbo computer shielded cable (including intrinsically safe DCS cable), electronic computer (including DCS system) with twisted pair shielding control cable, plastic insulated control cable.

4. Motor lead flexible cable insulation: 70 motor lead flexible cable (wire) Motor lead flexible cable (wire Motor lead soft wire (wire).

There are many materials that can be used as cable insulation, but there are very few materials that can be used as strong and widely used as polyethylene, and polyethylene after cross-linking modification can further improve its performance, thus greatly broadening the application field of polyethylene, and is widely used in industry, agriculture and daily life. The following Asian cable will take you to understand the due situation of cross-linked polyethylene in cables

Cross-linked polyethylene insulation is the use of chemical or physical methods to make polyethylene molecules change from linear molecular structure to three-dimensional network structure, from thermoplastic materials to thermosetting materials, the working temperature is increased from 70 to 90, significantly improving the material properties, so cross-linked polyethylene also has the following advantages:

1. Heat resistance: cross-linked polyethylene with a network three-dimensional structure has excellent heat resistance. It will not decompose and carbonize below 200, the long-term working temperature can reach 90, and the thermal life can reach 40 years.

2. Insulation performance: cross-linked polyethylene maintains the original good insulation characteristics of polyethylene, and the insulation resistance is further increased. The tangent of the dielectric loss is very small and is not greatly affected by temperature.

3. Mechanical properties: Due to the establishment of new chemical bonds between macromolecules, the hardness, stiffness, wear resistance and impact resistance of cross-linked polyethylene have been improved, thus making up for the shortcomings of polyethylene that are susceptible to environmental stress and cracking.

4. Chemical resistance: cross-linked polyethylene has strong acid and alkali resistance and oil resistance, and its combustion products are mainly water and carbon dioxide, which is less harmful to the environment and meets the requirements of modern fire safety.

Through the introduction of overseas advanced technology and equipment, Asia cable has significantly improved the performance of cross-linked polyethylene, and the YJV cross-linked polyethylene insulated power cable produced by YJV has perfectly inherited the mechanical properties of cross-linked polyethylene, environmental stress crack resistance, chemical corrosion resistance, creep resistance and electrical properties and other comprehensive properties, and has significantly improved the temperature resistance level, which can increase the heat resistance temperature of polyethylene from 70 to 90, and greatly extend the service life of the cable. In the future, Asia Cable will continue to use the excellent performance of cross-linked polyethylene to produce more and better products for everyone, and strive to become the most trusted and competitive cable enterprise in China.

To know the advantages of the manufacturing process of Asian cables, we must first be clear about the specific process.

Asia Cable introduces the NIEHOFF wire drawing production line from Germany to ensure that each cable meets international standards.

Advanced tube stranding machine, frame stranding machine, etc. are used to ensure that the stranded conductor is uniform in outer diameter, stable in structure, tight and neat.

In addition, safety and environmental protection are the use of raw materials in line with EU standards and the use of DC drive gas system and automatic material drying equipment, first-class system control, and then with high-voltage spark test, so that every meter of wire insulation has a more safety assurance guarantee.

Automation equipment, which can prevent damage and distortion in the production process of wires and cables, and ensure that every millimeter of cable meets the factory standard.

The plastic material used in the manufacture of cables is polyethylene or polyvinyl chloride and rubber, and the outermost layer is sheathed and the material is polyethylene or polyvinyl chloride or rubber.

PVC cable material is a polyvinyl chloride based resin, adding stabilizers, dioctyl phthalate, diisodecyl phthalate, dioctyl terephthalate, trioctyl trimelliate and other plasticizers, as well as calcium carbonate and other inorganic fillers, additives and lubricants and other additives, through mixing, kneading and extrusion.

When considering buying Asian cable products, the following factors need to be considered:

Usage: Different application scenarios require different types of cables, such as network cables, power cables, audio cables, etc. Before buying a cable, you need to make sure which type you need to avoid wasting money.

Specifications: The conductor material, cross-sectional area, impedance and other specifications of the cable will affect the transmission performance of the cable. When choosing a cable, make sure it meets your specifications.

Quality: The quality of the cable directly affects the service life and safety. High-quality cables use wear-resistant, high-temperature, flame-retardant materials, which can effectively ensure the safety and stability of use.

Brand: The selection of well-known brand products can guarantee the quality of purchase from two aspects: quality and after-sales service, and there is a certain guarantee.

When choosing a cable, we should consider the matching of the state and demand, and don't only pay attention to the low product, and ignore the quality, safety and other factors.

In short, before choosing Asian cable products, you need to make a good choice according to your own use, specifications, quality and other factors, and look for trustworthy brands and high-quality after-sales service.