How to deal with toilet water stains and how to remove toilet water stains

1. For the stains splashed on the wall due to bathing, use a damp cloth dipped in laundry detergent, soda noodles, cornmeal, etc., wipe any one of them, and then wipe it with water.

2. Rust stains on the ground, with rubber gloves dipped in steel wool balls and rubbed with toilet cleaner and oxalic acid.

3. For paint stains, first scrape off the paint with a wallpaper knife and then wipe it with laundry detergent.

4. For more than one meter, first use a rag dipped in warm laundry detergent water and scrub it again. Dip a rag in water and scrub again. Scrub first and then down.

5. Below one meter, scrub with a cleaning ball dipped in dry laundry detergent first. Dip a rag in water and scrub again.

How to remove water stains in the bathroom.

Pour the mixture of vinegar and water into the toilet where there are water stains, and after soaking for half a day, the water stains will be brushed away.

Or sprinkle baking soda in the bathroom and brew it with hot water for half an hour, and the water stains can also be brushed off.

If the water stains in the toilet are very dirty, we can first put some soda laundry detergent to clean it.

Removal method of scale of various equipment in the toilet: In addition to using toilet cleaner, toilet scale can also be poured into an appropriate amount of white vinegar to soak for half an hour, and then poured into baking soda to scrub; The rust of the shower head can be soaked in diluted vinegar for about 10-20 minutes, and then brushed with a toothbrush; Bathtubs and faucets can be wiped off with a sponge or rag dipped in a full salt and vinegar mixture; Toilet floor scale cleaning can take an appropriate amount of acidic solution and water mixed and rinsed in proportion; Toilet glass water stains can be cleaned with a coating to protect.

1. Cleaning of toilet dirt.

The toilet cleaner used to clean the toilet has a certain corrosiveness, but the decontamination effect is relatively good. Spray the toilet cleaner on the surface of the scale, brush it off with a brush after five minutes, and finally wash it with water, you must remember to wear gloves before cleaning.

You can also pour an appropriate amount of white vinegar into the toilet bowl and soak it for more than half an hour (white vinegar contains acetic acid, which can decompose scale); Then pour an appropriate amount of baking soda into the toilet bowl (baking soda has a cleaning and decontamination effect); Then use a toilet brush to carefully scrub the limescale from the toilet bowl.

2. Shower head rust cleaning.

Remove the shower head first, then dilute the vinegar with water, put the shower into a small basin with vinegar (remember not to use aluminum basins), and then soak for about 10-20 minutes; After soaking, then scrub with a toothbrush, and finally wash the shower head thoroughly with clean water to avoid corrosion of the showerhead; This keeps the sprinkler outlet unobstructed.

3. Remove limescale from bathtubs and faucets.

Mix salt and vinegar together and stir together, dilute the salt in the vinegar, heat, then dip the liquid with an absorbent sponge or rag, put it in the limescale of the bathtub or faucet, cover it for about 15 minutes, and then use a coarse cloth dipped in the salt and vinegar mixture, scrub vigorously, and it can be removed.

For stubborn limescale, you can also soak the rag in vinegar, then cover the limescale and let it sit overnight; The next morning, mix the baking soda and vinegar into a paste, then use a toothbrush dipped in the paste to scrub the area and clean it.

If you don't care about the cost of limescale on the bathtub, you can also use a special bathtub cleaner. It can not only effectively remove common soap stains and limescale on the surface of the bathtub, but also has special effects on the organic aged yellow scale that is difficult to remove, saving time and effort, and not damaging the surface of the bathtub.

4. Cleaning the scale of the toilet floor.

Take an appropriate amount of acidic solution and water and mix it in a certain proportion, dip it with a brush, brush it again, brush it back and forth several times, and finally rinse it with water. The acidic solutions on the market include oxalic acid, hydrochloric acid, phosphoric acid and other solutions, and gloves should be worn before cleaning the scale, because acidic solutions will be more or less corrosive.

You can also use a rag dipped in a little vinegar and wipe it gently to easily remove the stain. Scrubbing the ground gap with vinegar can be sterilized and disinfected, and it can also be strongly decontaminated.

5. Clean the glass water stains in the toilet.

When the hot water vapor meets the toilet glass, it will form a certain scale, so you can try to protect it with a coating, such as an easy-to-clean protective coating, which cannot be wiped off, acid and alkali resistance, which can protect the bathroom glass from stains, and the dirt has no stickiness on the coating, which can be removed by wiping with a sponge. Of course, it can also effectively resist fouling and antibacterial. The effective time of the coating is more than 10 years, and it is easier and less labor-saving in subsequent cleaning.

The water stains in the bathroom can be removed with salt, and after dipping the salt with a semi-dry rag, and then wiping the water stains in the bathroom with a rag, the water stains on it can be easily removed by touching the mess. It can also be treated with baking soda or shower gel, both of which have a better cleaning effect.

The specific use method is to use a semi-dry rag dipped in salt, and then wipe the toilet with a rag where there are water stains, you can easily remove the water stains on it, and the water stains on it will disappear soon.

Baking soda can also be used to remove water stains in the bathroom, pour 3 4 water into the water basin, add a few spoonfuls of baking soda and stir slightly, and then wipe the water-stained parts of the bathroom with a rag dipped in soda, and the water stains on it can also be removed.

The bathroom mirror is easy to blur due to water stains, so you can treat it with a shower gel. After dipping a little shower gel with a dry paper towel and smearing the shower gel on the dry mirror, the mirror can have the function of anti-fogging and will not appear water stains.

Update 1:I want to ask the next brother should be used?

Method 1: Use 1 part of water.

Add 20 parts water.

Then use a pig hair brush.

Brush gently.

Be careful to wear rubber gloves.

Avoid direct.

Contact"Wetting water, wetting water is extremely corrosive. Method 2: If the oil stain is not treated immediately, it will form a little bit of macula over time.

At this time, you can spray some bath kitchen all-purpose cleaner on the wall, then paste a kitchen paper towel, and after about fifteen minutes, then wipe it down. Or pour a small amount of general floor cleaner directly onto a cloth, wipe the macula and rinse with water. As for the more difficult places to clean, such as tile joints, you can use an old toothbrush to brush them with less effort.

2007-02-04 02:27:26 Added:

Sodium hydroxide is a strong alkaline chemical and should be used with extreme care. It can be purchased in hardware and chemical raw material stores. Add two tablespoons to half a dish of warm water and rub it with a towel.

Reference: StyleDesign Renovation tips05gd

Toilet floors are places that we often come into contact with in our daily lives, so they are easily contaminated by water stains. If not cleaned up in time, water stains will become increasingly difficult to remove and ultimately affect the hygienic environment. Here are some ways to remove water stains from your toilet floor.

Method 1: Use detergent to clean up.

1.Sweep away the trash and debris from the surface of the toilet floor, using a mop or vacuum cleaner as much as possible.

2.Choose a suitable detergent for cleaning and follow the instructions in the instructions.

3.Soak the floor stain with detergent and let it soak for about 10-15 minutes, then rinse off with clean water.

4.Then blot the water with an absorbent towel before drying the ground with a mop. If there are any residual stains, repeat the above steps.

Method 2: Clean up with white vinegar.

1.Prepare a mixture of white vinegar and water. The mixing ratio can be adjusted according to the condition of the stain.

2.Apply the mixture evenly to the stained part of the floor and let it sit for 5-10 minutes.

3.Wipe with a mop or slippery absorbent towel to remove water stains from the floor. If the stain is severe, repeat the above steps.

Method 3: Use baking soda to clean up.

1.Sprinkle baking soda over water stains on the toilet floor.

2.Pour in some warm water and scrub with a brush or mop. It should be noted that the ratio between baking soda and water should be appropriate.

3.After leaving it for a while, wipe the floor with a cleaning cloth.

Method 4: Clean with bleach.

1.Pour an appropriate amount of bleach into a basin of warm water and stir appropriately.

2.Apply the buried mixture evenly to the stain on the ground and let it sit for 5-10 minutes.

3.Rinse the contaminated area with clean water. If the stain is still not cleaned, repeat the above steps.

It should be noted that you must be careful when using bleach to avoid getting the bleach on your eyes and eyes. If you accidentally touch ** or eyes, you should immediately wash it off with plenty of water.

The above is how to clean water stains on the toilet floor. We need to maintain good hygiene habits, keep toilets clean, and clean them regularly to maintain a safe and healthy hygienic environment.

Toilet limescale is formed due to the deposition of water and dirt on the surface of the toilet for a long time, and it is more difficult to remove. If you use improper detergents and methods, it can cause damage to the toilet. Here are some effective ways to remove limescale from your toilet:

1.Use a scale remover: There are many highly effective scale removers on the market that can easily remove limescale from toilets. But choose an acid-free scale remover, as acidic cleaners can cause damage to the toilet surface.

2.Use citric acid: Citric acid is a natural cleaner that is also effective at removing limescale from toilets. Dissolve the citric acid powder in water, then pour the solution into the toilet and let it sit for 20-30 minutes, gently wiping the surface with a toilet brush.

3.Use baking soda: Baking soda is a very effective cleaner, and it is no exception when it comes to removing limescale. Mix baking soda and water into a paste, then apply to the surface of the toilet, let it sit for a few hours, and finally wipe it clean with a brush.

4.Use vinegar: Vinegar is a natural acidic cleaner that can easily remove limescale from toilets. Mix the white vinegar with water, then apply it to the surface of the toilet, let it sit for 20-30 minutes, and finally wipe it off with a brush.

6.Regular cleaning: It is important to clean your toilet regularly to prevent the long-term accumulation of limescale. Cleaning your toilet at least once a week can help you avoid limescale build-up.

When cleaning toilets, there are also a few things to keep in mind:

1.Do not mix detergents: If you mix different detergents, you may produce harmful gases or substances.

2.Use gloves: Always wear gloves when cleaning toilets to avoid damage from chemicals.

3.Maintain ventilation: Keep the toilet ventilated during the cleaning process to prevent the accumulation of harmful gases.

In short, it is not an easy task to remove limescale from the toilet, and it is necessary to choose the right cleaner and method to avoid damage to the toilet. At the same time, regular cleaning is also very important to avoid long-term accumulation of limescale.