How to waterproof and plug leaks in the toilet?

First of all, you have to know what is missing.

Only then did I know that I needed to block **.

What you have to do. First of all, find out for yourself that ** is missing. Is it really leaking.

Once you've found the problem. How big is the area to see the leakage. If it's a leak in the pipe. You can buy the 2nd floor said to plug the leak.

If there is a large area of leakage, then you need to find all the waterproof and redo the water discharge. . . Complete.

Before tiling, it must be waterproof, that is, the original ground is waterproof. Drop the mold first, plug the drainage pipe hole, and buy the plugging king plug. Then clean the ground, brush the liquid waterproof liquid as a whole, turn up 30-50 cm around the perimeter, test the water for 24h, if it leaks, find leakage, plugging.

If you are sticking bricks, leak. Then it is recommended that you buy water without leakage. It is a kind of transparent waterproof, first fill the floor tile joints with caulk or white cement, wipe clean, there can be no dust, apply water at the joints without leakage, all joints are brushed, and you can test the water after 24 hours, and it will definitely not leak.

If it is a leak in the position of cement or tiles, there is now a leak plugging product on the market, which is very effective. If it is a large area, it can only be waterproofed from scratch.

I don't know about that.

Toilet leakage plugging and waterproofing is an important measure to ensure the safety and hygiene of the bathroom. Here are some common ways to plug leaks in the restroom:

1.Check the bathroom drain pipes for blockages and clean up the dirt and debris in the pipes.

2.Install a waterproofing layer and apply waterproofing material to the bathroom walls and floors to prevent water from penetrating.

3.Install waterproofing strips and install them at the joints between the walls and floors of the bathroom to prevent water from penetrating.

4.Install the sealing strip and install the sealing strip at the joints of the bathroom door and window to prevent water penetration.

5.Install the drain valve and install the drain valve on the toilet drain pipe to prevent the backflow of sewage.

6.Regularly check whether the waterproof layer and waterproof strip of the bathroom are damaged or aged, and replace them in time.

7.Pay attention to the use of the restroom and avoid pouring large amounts of water or debris into the restroom drain to reduce the possibility of clogging.

1. Choose a waterproof material with excellent quality. When repairing leaks in the bathroom, it is best to choose waterproof materials of large brands, and do not buy those inferior materials for cheapness, so as to avoid problems with the quality of waterproof construction.

2. Do not do waterproof and plug leaks on rainy days. If you want to make the bathroom waterproof, you need to apply waterproof paint at least three times, and it needs to be left for 3 to 4 days to dry completely, so it is best to choose to work in rainy weather to avoid greatly reducing the effect.

1. At the joint between the PVC pipe and the cement layer, due to the different shrinkage rates of the PVC pipe and the cement mortar, the possibility of cracking after a long time is very high.

2. The cracks between the wall roots of the bathroom and the underground beams are caused by the expansion and contraction of heat, the settlement of the foundation or the deformation caused by temperature changes, resulting in cracks.

3. The waterproof material is aging or the temperature change resistance is not high, and the waterproof layer itself will break.

4. There are problems with the quality of the materials used, and now the market is chaotic and the quality is uneven. It is advisable to choose environmentally friendly materials from large manufacturers, which have a certain degree of reliability and can make the restroom last longer.

Are there any trivial things that bother you in your home life? For example, if there is a leak in the bathroom, the leakage in the bathroom will not only make a noise and affect the rest of the family, but also cause trouble to the downstairs householder, thus affecting the neighborhood relationship. So, why does the bathroom leak?

What to do if there is a leak in the bathroom?

In the toilet safety tips, the causes of toilet water leakage include:

1. There is water on the upper wall near the riser, which may be a leakage of the upper layer; It could also be that the upper layer leaked and leaked down the pipe.

2. There is water on the lower ground near the riser, which may be caused by the leakage of the upper layer along the pipe, or it may be a problem with the riser, the joint, valve, and cleaning port of the household.

3. The other walls are flooded by the top, and the bottom of the roof is rotten, which must be the reason for the upper layer.

4. The water in the ceiling may be caused by the ground on the upper floor, or it may be the leakage of the pipeline in the ceiling of the household (the sewer pipe of the household and the upper floor).

5. If there is water in the middle of the wall, it is most likely that the buried pipeline in the wall of the house is leaking.

Specific methods of toilet leakage plugging and waterproofing:

1. The ground is facing the slope of the floor drain and stuffy direction, cement mortar or bean stone concrete can be used, but the surface should be smooth. The slope near the door is small, and the slope near the floor drain is large, so you can grasp it according to the specific situation.

2. The pipeline passes through the root of the floor slab to strengthen the waterproofing. After the pipe root building sealing paste is sealed tightly, and the cement is smoothed and the foot pads are smoothed, the glass wire cloth reinforcement layer is 1 or 2 layers when brushing the waterproof coating. The same measures are taken near the floor drain.

3. The wall is clean and flat, without floating ash and small particles, and the small original corner or slope angle is wiped at the junction of the wall and ground. Brush waterproof coatings such as: plugging agent, when pasting glass cloth reinforcement layer 1 2 layers.

4. The total thickness of the polyurethane waterproof coating film is required to be more than millimeters. It can't be decided by the number of passes. The pipe root and the corner of the reinforcing layer are brushed first, and after the surface is dried at room temperature for 4h, then a large area is brushed and scraped. There shall be no leakage and bubbling. Brush a large area for 24 hours and then apply the next layer after curing.

Remind you: the base surface treatment is the key to waterproof construction, the base surface must be cleaned before construction to ensure that it is firm, smooth, clean, no dust, greasy, wax, release agent and other debris substances, if there are pores, cracks and other defects, must be repaired and smoothed with cement mortar in advance, and the yin and yang corners should be wiped into an arc line leakage. Keep the base moist but free of open water.

Bathroom waterproof leak repair method:

Clean the surface. Surface cleaning uses a blade tool to remove cohesive, loose cement blocks, loose concrete blocks, and other adhesive debris on the surface of the base layer.

Drill hole grooving. Use professional power tools to drill and remove slot holes, and the slot specifications are carried out according to the design requirements. The waterproof layer shall not be broken, and the dust in the borehole groove shall be cleaned up, and there shall be no debris.

Set the bulging agent. In the pipe roots, floor drains, yin and yang corners and other parts that are prone to leakage, use swelling agent landfill treatment. Use a small brush to evenly coat the swelling agent.

The above is the method of waterproof leakage repair in the bathroom, I hope it will help you Liang Sen.

Speaking of this bathroom, it sounds like this, there is almost no water leakage. As soon as the bathroom leaks, the two upstairs and downstairs are on fire, and it is necessary to redo the waterproofing, which is time-consuming, and delayed work, and affects life, and it costs money. . . Don't do it, the old leakage, the reluctance downstairs.

How can this be done? Please don't worry

Recently, the company's R&D team has carefully developed a new method for waterproof and leakage plugging in the building bathroom, which can play a good waterproof and plugging effect by pressurizing and pouring foaming waterproof solvent on the leakage part downstairs. This method does not need to move the ground, does not need to re-construct, saves time and effort, and has low cost, which is very suitable for indoor engineering. At present, this construction method has been successfully tested by a large number of tests.

It will be on the market soon.

Newer, this construction method has been widely used in the solution of toilet leakage problems. This year, in Zhaoyuan, many enterprises and families have done projects, and the results are very good! If your bathroom is leaking, what are you waiting for?

Do not trust the "guerrillas" on the streets. Don't use the bathroom for 3 days to see if there is a leak, if there is no leakage, it means that the water pipe is fine. If there is a leak, it is a problem with the water pipes.

If it is a leak in the ground, you need to knock the floor tiles and do a new layer of waterproofing. If you are troublesome, ask a professional waterproof personnel to do it from downstairs, make a hole downstairs, place waterproof waterproof nails, and pour hydrophilic grout injection. Achieve the effect of stopping water.

Henan Tiandi Building Waterproof Project **** Jinhua Branch.

Do a good job of waterproofing, and then leave a good slope, generally will not leak.

Various waterproofing agents can be applied and are very cheap.

Toilet waterproofing practices (**).

Bathroom waterproofing and decoration.

Bathroom waterproof plugging.

Are you new waterproofing or old bathroom leaking?