Why do tiles smell fishy when exposed to water?

If you can rule out that it's the water problem. That's the problem of floor tiles.

This situation is mainly caused by the clay of firing floor tiles, and this situation is not able to rely on post-processing, the only way is to keep the ground dry as much as possible, and then buy similar products in the future, you must pay attention not to buy clay bricks, this kind of brick soil quality is low density is prone to this problem, it is best to choose full magnetic.

Start by buying a few pots of greenery, such as the Lucky Tree.

Something, see if the taste will be gone.

Put in the laundry detergent.

Add some aged vinegar to the warm water to clean the floor tiles, so that you can achieve the effect of removing the fishy smell!

With wind oil essence. It is very effective in removing fishy odors.

Try to sprinkle as little water as possible.

Why do tiles produce odor when they encounter water, there are generally four reasons for odor as follows:

1. Bonding mortar, winter construction, such as ammonium chloride and other antifreeze agents are added to the construction.

2. Building components, in winter construction, will also add antifreeze.

3. Improper decoration material selection and high water absorption rate are generally used in wall tiles or bedrooms and living rooms, etc., if used in the kitchen and bathroom, it is easy to inhale organic matter and mildew, resulting in odor.

4. The water absorption of floor tiles is not very good. If there is a smell, it may be that the water absorption of the tile is not very good, because the water has not been absorbed for a long time and stinks.

1. The tiles produced in the early years contain magnesium silicide because of their poor quality, and magnesium silicide will produce silane, a fishy gas, when exposed to water.

2. The mop has algae matter. Excess nutrients such as nitrogen, phosphorus and organic carbon in the water can induce algae growth, especially the use of phosphorus-containing detergents. As a result, if the mop cloth is not dried or dried in time, algae will grow, and components such as hydrogen sulfide, sulfur and ammonia produced by algae death and lack of oxygen in the water body will cause odors.

3. Water quality problems. Considering the pollution of tap water or engineering construction, or river treatment pollution, etc. Unqualified water contains colloidal impurities and other organic substances, and the trimethylamine, trimethylamine oxide, dimethylsulfide and other components produced by the metabolism and decay of these organic substances have a special odor.

Organic matter spoils in the mop, and microorganisms and other metabolites remain on the ground during mopping, resulting in odors. Therefore, this is also a very important factor.

4. Paving reasons. Tile hollowing is also one of the peculiar smells, which can lead to water accumulation in the ground after mopping, breeding bacteria and smelling. Especially in the kitchen and bathroom, because the ground is often in contact with water, water penetrates from the brick joints to the bricks and accumulates, and the tiles are waterproof, the water is not easy to drain, and finally stinks.

5. When paving, some floor tiles have high water absorption, or half tiles, which will cause such a situation. When the tile embryo body is paved, the mortar mixed by unclean water is inhaled, and after mopping the floor, the residual moisture is in contact with the tile embryo body and the base mortar, and then the moisture volatilization causes the odor to be emitted, resulting in nausea and unpleasant odor.

There are generally two reasons for the fishy smell of floor tiles: one is the high water absorption rate of tiles, which is soaked in unclean water, and the fishy smell caused by stains and mortar inhaled into the bricks; The second is that the tiles are hollow, and the hollow drum is stored with rotten water.

How to get rid of the fishy smell of floor tiles?

1. Laundry detergent.

Laundry detergent has the effect of cleaning and deodorizing, pour some laundry detergent on the floor, and then sprinkle water to clean the ground with a mop, which can mop the floor clean and remove the smell. After mopping the floor, the floor tiles will produce a fishy smell. This smell is very troublesome, and many owners also use different methods to solve the problem, but it is often a symptom rather than a cure, capricious.

So, what is the reason for the fishy smell of floor tiles?

1. What is the reason for the fishy smell of floor tiles?

There are generally two reasons for the fishy smell of floor tiles: one is the high water absorption rate of tiles, which is soaked in unclean water, and the fishy smell caused by stains and mortar inhaled into the bricks; The second is that the tiles are hollow, and the hollow drum is stored with rotten water.

The mop is a tool for mopping the floor, which needs to be used repeatedly, and the mop is often in contact with the water, if it is not thoroughly dried or sun-dried, it is easy to breed algae in the mop, and there is a fishy smell when mopping the mop is caused by the death of the algae on the mop or the lack of oxygen in the water body.

2. How to get rid of the fishy smell of floor tiles?

1. Laundry detergent.

Laundry detergent has the effect of cleaning and deodorizing, pour some laundry detergent on the floor, and then sprinkle water to clean the ground with a mop, which can mop the floor clean and remove the smell.

2. There is acetic acid in vinegar vinegar, acetic acid has a bactericidal effect, which can help the ground to clean the smell, the specific method is to sprinkle some vinegar on the ground during the mopping process, and the taste will be almost dispersed when the ground is dry.

3. Toilet water.

Flower water is a common mosquito repellent in summer, in addition to sterilization and mosquito prevention, it can also be used to clean the smell, the flower water contains mint, camphor and other pharmaceutical ingredients, sprinkled on the ground and mopping the floor can be cleaned of the smell, people can also refresh after smelling.

Disinfectant. The fishy smell after mopping is caused by the algae in the mop, so adding some 84 disinfectant solution when mopping the floor has the effect of disinfecting and killing some organic matter and preventing algae growth.

5. Open windows for ventilation.

After mopping the floor, you need to open the windows of the home to let the wind in, so that the floor dries quickly, which can reduce the growth of bacteria and help the room to disperse odors.

Ceramic tiles are still relatively common in our lives, many people will choose marble tiles when decorating, not only very good-looking, but also able to make our whole room more open, but some tiles are fishy, which is for a certain reason, and then I will introduce it to you.

First of all, we have to know that in the process of buying tiles, we will smell the smell of tiles, to know that the better material of the tile is not a little smelly, and at the same time it is very smooth to the touch, so if you want to make the tiles at home use for a long time, try to choose some good material tiles, although it may be expensive, but it can avoid the harm caused by some inferior tiles to our body. Secondly, once the tile has a fishy smell or other peculiar smell, then it means that these tiles are an inferior tile, not only the quality is not up to standard, but also in the production process there will be some chemical components or harmful components, then after the use of such tiles, it will lead to the whole room will appear fishy. Finally, it has a certain relationship with our mop, because we often use the mop to mop the floor, if there is a fishy smell on the mop, then after we mop the ground, there will be a fishy smell on the tile.

It can be seen that if you want to make the tiles last longer, then we must do a good job of protection, especially some marble tiles are very easy to hide ash, so when mopping the floor once a week, try to use some floor cleaning tablets or other decontamination products, which can not only make our tiles very bright, but also very new like the tiles sold on the market.

Finally, I want to say that ceramic tiles are also very important for us, so when we choose ceramic tiles, we must pay attention to the cost performance, but also to shop around, because there are still many brands that sell ceramic tiles, try to buy some big brands and good quality, such tiles can be used for a long time.

Ceramic tiles will produce a fishy smell, which may be because the tiles are of inferior quality, the quality is not up to standard, the micropores of this product contain hydrogen sulfide and sulfur dioxide generated during firing, the compactness of the tiles is not good, and it is easy to emit peculiar smells after being wet, or it is also possible that the mop has not been cleaned.

The main reason is that the water absorption rate of the tile is relatively high, and it is often soaked in water to produce a foul smell, or there are algae dead bacteria on the mopping rag, so it will produce a fishy smell.

This situation may be due to the dampness of the tiles, or it may not be cleaned well, or it may be that the mop has an odor, so it will cause the tiles to smell fishy.

Summary. What happens when tiles stink in water: The analysis of the causes of odor is as follows:

1. Bonding mortar, winter construction, such as ammonium chloride and other antifreeze additives are added to the construction; Second, building components, in winter construction, will also add antifreeze; 3. Improper decoration material selection and high water absorption rate are generally used in wall tiles or bedrooms and living rooms, and if they are used in kitchens and bathrooms, it is easy to inhale organic matter and mildew, resulting in odor; 4. Organic adhesives, organic adhesives with poor quality. There are also many reasons why adhesive mortar smells. For example, polymer additives, in order to improve the bond strength, polymer binders may also be added to the adhesive mortar, if the binder can release hydrogen sulfide, one is very small, but also particularly odorous; For example, if the construction sand is sea sand, it will also lead to the reduction of life and odor in later use; For example, cement, which contains sulfide, reacts with organic matter to produce hydrogen sulfide, which is also smelly.

Ceramic tiles can also stink, especially black-hearted and yellow-hearted ceramic tiles, which are fired in a reducing atmosphere and produce sulfides such as hydrogen sulfide and sulfur dioxide, which are included in the micropores of the tiles and will release odors. However, for ceramic tiles with low water absorption, there should be almost none.

What happens when ceramic tiles stink in water: the analysis of the causes of odor is as follows: 1. Bonding sand slurry, winter construction, antifreeze such as ammonium chloride and other antifreeze are added to the construction; Second, the building components, in the winter construction, will also add antifreeze slag orange; 3. Improper decoration material selection and high water absorption rate are generally used in wall tiles or bedrooms and living rooms, and if they are used in kitchens and bathrooms, it is easy to inhale organic matter and mildew, resulting in odor; 4. Organic adhesives, organic adhesives with poor quality.

There are many reasons why the adhesive mortar smells like a lump. For example, polymer additives, in order to improve the bond strength, polymer binders may also be added to the adhesive mortar, if the binder can release hydrogen sulfide, one is very small, but also particularly odorous; For example, if the construction sand is sea sand, it will also lead to the reduction of life and odor in later use; For example, cement, which contains sulfide, reacts with organic matter to produce hydrogen sulfide, which is also smelly. Ceramic tiles can also stink, especially black-hearted and yellow-hearted ceramic tiles, which are fired in a reducing atmosphere and produce sulfides such as hydrogen sulfide and sulfur dioxide, which are included in the micropores of the tiles and will release odors.

However, for ceramic tiles with low water absorption, there should be almost none.

How to deal with it.

Improper selection of decoration materials, floor tiles themselves have quality problems or high water absorption rate, generally used in the wall tiles or bedrooms and living rooms and other places, if the hall is used in the kitchen and bathroom, it is easy to inhale organic matter and mildew, resulting in odor; There will be a fishy smell after the floor tiles are dragged on, and they will disappear naturally after a long time. When mopping the floor, Yinshan can add some detergent, toilet water, wind oil essence or lemonade to remove the odor. After mopping the floor, be sure to wash the mop thoroughly and put it in a ventilated place to dry naturally to prevent mold from growing.

That is caused by the poor quality of the carcass of the tile - generally a few yuan a piece of 600 * 600 tiles have this situation.

Sprinkle some water to try to see if it tastes, it may be that your pallet has deteriorated, if it is a cloth problem, soak it with laundry detergent, and then expose it to the sun to dry thoroughly.

Summary. What to do if the tile soaking water has a fishy smell: the fishy smell of the tile soaking water is to pour an appropriate amount of special cleaning agent for the tile into the cleaning water, and then clean the tile; Laundry detergent and dish soap can also be cleaned with a tile polyester cleaner to remove fishy odors

Pour an appropriate amount of special tile cleaner into the cleaning water, and then go to clean the tiles; It is important to note that cleaning tools must be cleaned beforehand. Clean with laundry detergent or dish soap: Laundry detergent and dish soap can also remove fishy odors, you can use laundry detergent water or dish soap water to wash the tiles again, and then wipe them again with a rag dipped in water.

Vinegar water to clean tiles: Pour an appropriate amount of vinegar into the container, then dilute it with water, and then wipe the tiles with a rag dipped in vinegar water. If the tile area is larger, you can use a mop.

Good. What to do if the tile soaking water has a fishy smell: the fishy smell of the tile soaking water is to pour an appropriate amount of special cleaning agent for the tile into the cleaning water, and then clean the tile; Laundry detergent and dish soap can also remove the fishy smell and make the lack of Ling cleaned with a key tile cleaner

Pour an appropriate amount of special tile cleaner into the cleaning water, and then go to clean the tiles; It is important to note that cleaning tools must be cleaned beforehand. Clean with laundry detergent or dish soap: Laundry detergent and dish soap can also remove the fishy smell, you can use laundry detergent water or dish soap water to clean the tiles again, and then wipe the slag with a rag dipped in water.

Vinegar water to clean tiles: Pour an appropriate amount of vinegar into the container, then dilute it with water, and then wipe the tiles with a rag dipped in vinegar water. If the tile area is larger, you can use a mop.