What is the problem of refueling the heavy truck and what is the problem of the forklift water tank

There are many reasons for the car to boil, in addition to the hot weather, the overload of the air conditioner, the failure of the heat dissipation element and the lack of water in the water tank will make the car boil. I have compiled the relevant content, welcome to enjoy and learn from it.

What is the reason for the car tank to boil.

1. Long-term water circulation will cause the slow loss of water, resulting in a lack of water in the water tank.

2. If there is dirt in the water tank, such as mud, rainwater, etc., it is easy to rust the water tank.

3. When the temperature is too high, you can use your hand to touch the temperature of the upper water pipe and the lower pipe to judge, if the temperature difference between the two water pipes is large, it can be judged that the thermostat size cycle conversion is not working properly.

4. If there is air in the cooling system, it will form air resistance, which will make the cooling water circulate poorly, resulting in high engine temperature.

5. If the vehicle is driving on a dirt road or muddy road for a long time, there will be some dirt adhering to the radiator, which will affect the heat dissipation effect over time and cause the water temperature to be too high.

Precautions for boiling the car water tank.

In summer, it is easy to open the water tank, which means that the refrigerant in the water tank has reached the boiling point, and the boiling is very harmful, and the car hurts people, so it has also attracted widespread attention.

Driving on the hot asphalt road, suddenly glanced at the water temperature gauge near the dashboard, and found that the temperature had reached 100 degrees Celsius. Maintenance experts warn that this move is too reckless. If you keep adding antifreeze, 100 degrees Celsius is still within the normal temperature range and does not reach the boiling point, the temperature of the antifreeze is between 85 degrees Celsius and 105 degrees Celsius is considered normal, and its boiling point is 120 degrees Celsius.

If you add water, it is estimated that the pot is about to boil, but whether it is antifreeze or water, you can't open the lid of the water tank at this time, because there is water vapor in the tank at this time, and the pressure is very high.

1. There are many reasons for the high water temperature of the engine or even "boiling", such as damage to the electronic components of the cooling system (thermostat, cooling fan), poor heat dissipation of the radiator, insufficient coolant, etc.

2. Pull over, but don't turn off the engine immediately! Because the coolant temperature is already high and the cooling capacity has reached its limit, if the engine is turned off immediately, the boiling coolant will stop circulating (for most engines, the water pump is driven by the crankshaft).

3. Of course, if it is an electric water pump engine, it will be better), too high temperature can not be cooled, and the engine is also unbearable. If the engine is left idle for a while, the constant circulation of coolant can still reduce the impact of high temperatures on the engine.

4. Check whether the antifreeze is lacking, resulting in high engine water temperature. The circulation of the coolant, whether the circulation is not smooth. Secondly, you can also check that water temperature sensors, water pumps, thermostats, cooling fans, etc., may cause high water temperatures.

If you don't have a strong hands-on ability, you should go to the repair shop for an inspection.

As long as the engine is working properly, check whether there is organic oil in the electric fan and the water pump and the water tank, and the organic oil is the cylinder gasket is broken.

Boiling the pot has a great impact on the life of the engine. After boiling, you should stop the car immediately and turn off the engine, and when the water temperature is cold, slowly unscrew the lid of the water tank with a warm towel to see if there is a lack of water.

One or two slight boiling is fine, always boiling the pot and if it is very serious, it will cause the engine piston to melt, or the water sealing ring will leak, which is a very troublesome problem.

First of all, it is necessary to find out whether the engine is boiling or turning over the water The reasons for the forklift engine to open the pot are as follows:

1.The engine does not have enough coolant.

2.The circulation system of the engine is not good, such as the aging of the water pump, the closure of the thermostat, etc.

3. The heat dissipation of the water tank is not good, 4. Or is it a long-term overload operation, the outdoor temperature is high, and the engine is added with antifreeze, which may cause the engine to boil.

A blockage or leak in the entire water cycle road will cause high temperatures (boiling).

1 is the water tank is seriously blocked

2 is the serious blockage of the engine's water hole

3 is the water pipe blockage

4 is that the thermostat cannot be opened

5. The pump is working poorly (the amount of water turned over is not enough).

6. The fan water temperature sensor is bad (can cause the fan to not work).

7. Water shortage caused by water leakage such as broken fans, 8 water pipes, and water blockages

9. Serious overload, long-term overspeeding

10 Ignition time early.

Let's check and rule them out one by one. In addition, you can modify an electronic water temperature meter for 20-30 yuan (your car should be an old car, the older the car, the more you should pay attention to the water temperature). It can accurately read the water temperature of your car, and it is a red word screen, which is very intuitive and eye-catching.

What is the reason for the car to run "boiling"? Old driver: If you don't change your habits, any car is the same!

This is the second time that my Jinbei car has been boiled, and it has been boiling since I went out twelve miles from home, which is too annoying, what is the reason?

There are 3 main reasons why cars are boiling:

1. The water tank is short of water, the water tank is leaking, and the pipeline is blocked.

2. The thermostat is not good for circulation.

3. The electronic fan does not work, the relay failure and the electronic fan failure, and the maintenance method of the water temperature sensor failure

1. Check whether the water tank has leakage and water shortage, if there is a shortage of water, add it in time, and the blockage will need to pass the pipeline 2.

3. Check whether the electronic fan is working normally, test whether the relay is engaged, check whether the electronic fan is damaged, and test whether the water temperature sensor is working normally with a diagnostic instrument.

There are many reasons for the car to boil, in addition to the hot weather, the overload of the air conditioner and the failure of the heat dissipation element will also make the car boil. A thorough inspection of the car's cooling system is the primary way to prevent boiling. Check whether the cooling fan is working properly, whether the water tank is leaking, whether there is a lack of coolant, if the water tank is leaking, it needs to be repaired or replaced in time, if the water tank is short of liquid, it needs to be replenished in time, and if the coolant is turbid and deteriorated, it needs to be replaced.

In addition, the moisture contained in ordinary coolant can form a water vapor barrier layer on the cylinder wall of the engine, which hinders heat dissipation, leads to engine failure, and shortens the life of the engine.

1. The thermostat is broken, causing the fan not to turn on, 2. The water pipeline is blocked, and 3. There is a shortage of water.

Generally, there are two reasons for the car water tank to boil, one is because the debris on the road enters the water tank, and the other is that the general antifreeze cooling temperature is 120 degrees, and some people do not use the antifreeze correctly It will also easily cause the car's water tank to boil.

In this case, generally park the car on the side of the road, check the engine of the car, choose antifreeze for cooling, and pay attention to the cleanliness of the car water tank, which is still more important. Another thing to note is that you should never remove the lid of the water tank after the water in the car's water tank is boiled, in this case, you are likely to be burned.

If you leave it on for too long, or if you are short of oil, replace the water in the tank with antifreeze.

It is generally a problem with the water tank, there is not enough water or no water at all to cool the engine.

Water pipe seepage, cooling water is insufficient, in this case, distilled water or pure water can be supplemented for emergency, and then repaired when convenient. Just be careful not to open the lid of the water tank when heating the car to avoid being burned by the water vapor sprayed by the strong pressure inside. If there is enough water, look at the fan behind the tank, which should be running even after the ignition is off when the water temperature is high.

If the fan does not move, turn the fan blades first to see if the fan motor is stuck, and you can easily turn it under normal conditions. If there is no problem with the motor, check the fan fuse, which is one of the reasons for many occurrences, especially in the summer when the electricity consumption is high. Thermostat failure is also the cause of high water temperature, once the failure will cut off the cooling water circulation, when the water tank above and below the two thick glue pipes have obvious temperature difference, that is, the thermostat is damaged and faulty, need to be removed and replaced, which is generally handed over to professionals to deal with.

Hello, it may be that the radiator of the tank is clogged. The thermostat is broken and won't be opened. The pump malfunctioned, causing it to not circulate.

Whether the fan belt is too loose and slippery. Turning on the air conditioner on a hot day will increase the load on the engine. All of the above can cause high engine temperatures.

There is also a late timing of fuel injection, which produces aftercombustion, which can also cause high engine temperatures. If the water temperature is too high, do not touch it with your hands, or open the lid of the water tank, otherwise it will cause burns.

A blockage or leak in the entire water cycle road will cause high temperatures (boiling).

1 is the water tank is seriously blocked

2 is the serious blockage of the engine's water hole

3 is the water pipe blockage

4 is that the thermostat cannot be opened

5. The pump is working poorly (the amount of water turned over is not enough).

6. The fan water temperature sensor is bad (can cause the fan to not work).

7. Water shortage caused by water leakage such as broken fans, 8 water pipes, and water blockages

9. Serious overload, long-term overspeeding

10 Ignition time early.

Hello, the main points of car engine boiling: lack of water in the water tank, damage to the thermostat, radiator fan not turning, broken or too loose water pump belt, damaged water pump.

Analysis of the reasons for the boiling of the car engine.

1. The engine coolant is insufficient.

2. The water temperature sensor or water temperature meter is faulty.

3. Downwind driving or long-term low-speed and large-load driving in high temperature season 4. Ignition time is too early or too late.

5. The blinds cannot be fully opened.

6. The mixture is too thin or too thick.

7. The outside of the water tank is dirty or the internal scale is serious, resulting in poor heat dissipation, and the water tank needs to be cleaned or replaced. 8. The fan clutch is engaged too late or the cooling fan is not working, the fan rotation resistance is too large, the blades are installed in reverse, and the blades are damaged.

9. The performance of the electric fan is poor or there is no high speed.

I hope you will take my advice, thank you!

It may be that there is a problem with the cooling system, such as no coolant, etc., which causes the engine temperature to be too high, resulting in boiling; It may also be an engine failure, which generates a large amount of heat energy, which exceeds the standard, so that the cooling system cannot be cooled down, resulting in boiling. It is recommended to go to a professional place for inspection and repair as soon as possible to avoid danger.

There are many reasons, the water filter is clogged, the water pump is not working, the fan belt is damaged, the coolant is problematic, the engine works at high temperatures for a long time, and so on.

The whole water tank is like a boiling teapot going straight out of steam, because the weather temperature is not high, hit ** ask me why do I boil? In fact, there are many reasons for the car to boil, in addition to the hot weather, the overload of the air conditioner, the failure of the heat dissipation element and the lack of water in the water tank will make the car boil.

What is the reason for the car to run "boiling"? Old driver: If you don't change your habits, any car is the same!

When the water tank is boiled, the first thing to analyze is whether to open the pot at low speed or at high speed, because the treatment after boiling is different in these two cases. When the low-speed water tank is boiled, that is, the engine is in a low-speed running state before the boiling, you should immediately pull over, turn off the engine, and open the engine compartment cover to facilitate its heat dissipation, and then call the service station to wait for rescue. If the engine is running at high speed before boiling, you should immediately pull over and park the car, unlike low-speed boiling, do not extinguish the engine at this time, but idle the car and let the engine run for a while.

Because the engine was running at high speed before, a large amount of heat generated by the engine has not yet been dissipated, and this waste heat needs to be dissipated by residual cooling water.

Lack of antifreeze or poor heat dissipation in the water tank needs to be checked for the cause in repair.

The thermostat is bad and the water stick is bad, and the water tank bets that only these three things will be high temperature to see if the electronic fan rotates.

Hello, generally not enough water. The cylinder gasket is flushed, and the fan does not dissipate heat.

The fan does not turn. The thermostat won't open. The punch will be boiled.

The inside of the tank is dirty, and the circulation is not good.

The antifreeze is missing and the thermostat is broken.

Engine wear, or poor lubrication, air accumulation in the cylinder water jacket, and low water tank liquid level may lead to high temperature or even boiling.

It is recommended to go to the repair shop or 4S for overhaul (thank you for adoption).

First of all, you need to know what kind of car you are, and tell you about the routine inspection.

1. Check whether the pump belt is bad.

2. See if the thermostat is turned on normally.

3. See if the radiator fan is normal (electronic fan) 4, and see if the radiator of the water tank is blocked by dust.

5. Check the wear of the impeller of the water pump.

6. Is there a blockage in the water tank and waterway.

7. Check whether the oil is white (whitening proves that the cylinder gasket is broken or the cylinder head is rotten) 8. Check that the ignition is normal.

Boiling the pot is very damaging to the engine, and the high water temperature will accelerate the wear of the cylinder liner piston, and the power will decrease, which is a great reduction in the life of the engine.

The normal working temperature of the engine cooling system is 80-95 degrees, too high or too low will shorten the life of the engine.

Hello, the main points of car engine boiling: lack of water in the water tank, damage to the thermostat, radiator fan not turning, broken or too loose water pump belt, damaged water pump.