What is the problem that the car can be locked without the door closed?

If the door is not closed, you can lock the car, you can use the battery of other vehicles to take power, and you can open the door after the car is powered on.

Preparation materials: a jumper start cable, a rescue vehicle.

Specific steps: 1. When the vehicle loses power and cannot be started, the wiring method is generally used to start the car and take out the standing car battery.

Hitching. 2. Open the hood and battery protective shell of the two cars to expose the positive and negative poles of the battery. Whether it is a rescue vehicle or a rescue vehicle, the operation of the battery should be carried out in the state of flame-off, and the positive and negative poles of the battery must be confirmed.

3. Take a tie wire, connect one end to the positive pole of the unpowered battery, and connect the other end to the positive pole of the electric battery. Do not touch the positive and negative electrodes, there is a danger of short circuit!

4. Take another wire, first connect the negative electrode with the electric battery, and then connect the other end to the negative electrode of the non-electric vehicle.

5. After the wire is set up, you can start the vehicle with power loss and open the door.

When our car is powered on, when the door is not closed tightly, the dashboard of the car will show which door is not closed properly. If it is closed, if the door is not closed properly, you cannot lock the car with the key, because the trip computer cannot receive the signal to lock the car, so the door cannot be locked.

Depending on the model, the state of the lock will vary. Some models will still complete the locking action, but if the door is open, it means that it is unlocked. For some models, if the door is not closed properly, there will be no warning sound when locking the car, and the lock light will not flash.

Some models have keyless entry. When the key is close to the body, the door lock will automatically open and the anti-theft state will be lifted. When the key leaves the car body at a certain distance, the door will automatically lock and enter the anti-theft state. Keyless entry is very convenient and practical.

It's important to lock your car. Sometimes, some valuables will be left in the car. If you don't lock your car in time, your valuables may be lost, so lock your car in time after parking.

That's all for you. Can you lock the car if the door is not closed? Do you have a deeper understanding of this issue?

I hope today's introduction can inspire and help you. If you find it useful, collect it quickly.

There are several reasons why the main driver's door cannot be closed: 1. The door cannot be closed, it may be that the door is deformed, resulting in the door lock and the door lock post are not in the same straight line. 2. After washing the car in winter, water enters the handle outside the door, causing the door lock or the door lock cable to be frozen, and the cable is not returned, and the door lock is always open, so the door cannot be closed.

If you can't lock the door lock manually with a mechanical key in the state of opening the door, then you can tell that the cable is pulled or the door lock is frozen. 3. It may also be caused by the failure of the door lock itself. Volkswagen Magotan recall event In December 2019, FAW-Volkswagen recalled some domestically produced 2015-2016 models of Magotan produced between July 30, 2015 and May 20, 2016, involving 53,054 vehicles; and 7,550 2010-2018 Magotan and CC cars involved in the use of risky after-sales parts, totaling 60,604 vehicles.

Some vehicles within the scope of this recall may fail due to the manufacturing reasons of the first manufacturer, the electronic components inside the airbag control unit may fail, which may lead to the accident or activation of the front occupant airbag and seat belt pretensioner in extreme cases, and may also lead to the front occupant airbag and seat belt pretensioner being deactivated, thereby increasing the risk of accidents or injuries to the vehicle, and there are potential safety hazards.

It is recommended that each door be reopened and closed several times, and generally speaking, there must be a door that is not closed properly to have this prompt.

If it still appears after each door has been reopened, it is recommended to restart the ignition.

If there is still a problem restarting the ignition, then it is recommended to go to the car repair shop to check, it may be a display fault or a fault in the door induction line.

Because the lights of the door are controlled by opening and closing the door, and there must be a pin switch on each door to control the lights on the door, that is, as long as the door is opened, the pin is opened, and the light is on, and vice versa.

If you confirm that the door has indeed been closed, but the central display still shows that the door is not closed, then you should consider whether the door sensing system has failed, and you can rematch the car's cab door sensing system...

Check it carefully, it may be that there is a problem with the original test.

3. Central control setting. 4. The method of lifting is: press the release button twice in a row to completely remove the fortification.

If you can't completely unload it after pressing it twice, you can completely unactivate it by pressing the release button within 30 seconds by hitting the ACCON with your car key and then hitting it back.

Summary. Hello friend, the back door of the vehicle is open and locked. The following describes what to do if you cannot close the door.

The first is to use the mechanical key of the vehicle, or find a one-word change cone. Second, keep the vehicle in the state of unlocking, and then pull the outer handle with your hand, and then use the change cone to the inside of the door lock, and force the outward wave to normal, you can lock the door to return to the normal position. Third, in this case, remember not to close the door vigorously, it is easy to cause damage to the door, damage, if the door lock is damaged, then this can not be dealt with, can only replace the new door damage.

Hello friend, the back door of the vehicle is open and locked. The following describes what to do if you cannot close the door. The first is to use the mechanical key of the vehicle, or to find a Zen word to change the cone.

Second, keep the vehicle in the state of unlocking, and then pull the outer handle with your hand, and then use the change cone to change the dust to the inside of the door lock, and force the outward wave to normal, you can lock the door to return to the normal position. Third, in this case, remember not to close the door vigorously, it is easy to cause damage to the door, damage, if the door lock is damaged, then this can not be dealt with, can only replace the new good macro door damage.

Hello friend, the back door of the vehicle is open and locked. The following describes what to do if you cannot close the door. The first is to use the mechanical key of the vehicle, or to find a Zen word to change the cone.

Second, keep the vehicle in the state of unlocking, and then pull the outer handle with your hand, and then use the change cone to change the dust to the inside of the door lock, and force the outward wave to normal, you can lock the door to return to the normal position. Third, in this case, remember not to close the door vigorously, it is easy to cause damage to the door, damage, if the door lock is damaged, then this can not be dealt with, can only replace the new good macro door damage.

The car cannot be locked if the door is not closed. 1. When locking the car, it can only be locked if the door is fully closed; 2. The car cannot be locked if a door is not closed; 3. In the case that the door of the vehicle is not closed, there will be a prompt on the dashboard of the vehicle, and when the door is not closed, the operation of locking the car can be completed, but the central control system will automatically open after the lock, resulting in the vehicle being unlocked.

Can you lock the car if the door is not closed tightly The car cannot be locked if the door is not closed tightly. 1. When locking the car, it can only be locked if the door is fully closed; 2. The car cannot be locked if a door is not closed; 3. In the case that the door of the vehicle is not closed, there will be a prompt on the dashboard of the vehicle, and when the door is not closed, the operation of locking the car can be completed, but the central control system will automatically open after the lock, resulting in the vehicle being in an unlocked state.

On some models, there is a beep when the door is unlocked. When the car is locked, three lights flash to indicate that the car is successfully locked. If the car does not respond, the door is not locked. After locking the car, it is best to subconsciously pull the handlebar to see if the door is really locked.

Remove at least two doors. This is the safest method. When pulling the door, pay attention to light operation and do not use too much force, so as not to hurt the door opener.

If you are not sure whether it is locked, you can check whether the vehicle's warning light is on when the vehicle is locked. Generally speaking, as soon as the full headlights flash, the ground vehicle has been locked.

Should the door drain hole plug be pulled out The drain hole rubber plug should be pulled out, which will help the car drain and prolong the life of the car. There are drainage holes on the car doors. When washing a car or when it rains, some water will enter the door through the gap between the lift glass and the sealing strip, and the water will be discharged through the drainage hole.

If the drain hole is blocked, the water in the door cannot be drained. If the water in the door does not drain, it will cause some malfunctions. Each door has more than two drainage holes, usually located in the lower part of the door panel.

If it is not pulled out, water will form inside the door, and the door will rust after a long time; And there are many parts inside the door, including the circuit of the window regulator and the car stereo, which can cause damage once water gets in. Due to the low location of the drainage holes on the car doors, it is easy to be clogged by mud when walking on muddy roads, so the drainage holes on the car doors should be cleaned in time. In addition, there are many drainage holes on the car, such as air conditioning drainage holes, engine compartment drainage holes, sunroof drainage holes, trunk drainage holes, fuel tank cover drainage holes, etc.

Sunroof drains, engine compartment drains, and door drains are prone to clogging. The engine compartment drains are located on either side of the wipers, and the sunroof drains are also exposed. These two areas are particularly susceptible to clogging with leaves and dust on rainy days, so door drains, engine compartment drains and sunroof drains should be cleaned regularly.

Can you lock the car if the door is not closed @2019

Hello dear! I think the sensor of the door is broken, and the open state of the door cannot be checked, so it should be replaced with a sensor. In this case, it is recommended that the landlord go to check the wiring problem of the car, and there should be a problem with the sensing part.

In this case, you open the door of the car, manually press the door switch, and then observe whether the door alarm light is off. The door warning light indicates that the door is not closed, it may be caused by a door that is not closed, if the door is closed, the door warning light will not be reminded, and you need to check whether the door is closed, or it may be caused by the trunk of the car is not closed, if it has been closed, then it may be a problem with a door switch, and you try to open and close the door one by one. This needs to be set up again on the computer.

The door was not closed properly, and the body control unit did not receive the door lock closing.