-
The film should not only choose regular products, but also pay attention to the construction process of the car film. Because the effect of the film depends largely on the application process.
1. In order to avoid dust and impurities affecting the effect of the film, the body glass should be cleaned first before the car film.
2. The parts that may be damaged during the car film should be covered in advance to prevent scratching the car paint, interior and other parts; Accessories that may affect construction also need to be disassembled in advance.
3. After the overall treatment of the car body, it is necessary to start cutting the car film, and the car film should be preliminarily cut according to the size of the glass.
4. Paste the roughly cut car film on the car glass, and then the front and rear gears need to bake the film according to the amplitude of the car glass, and the effect is to make the amplitude of the car film close to the glass, so that the car film will be flat and free of water marks.
5. After baking, the film will be very obediently attached to the glass, and then it is necessary to make further corrections, that is, according to the shape of the glass, the corresponding shape will be finely cut.
6. The glass film is pasted inside, so the key step is to put on the film, and the requirement of the upper mold is to clean the inside of the glass, which is fast and accurate, and pushes out the moisture as soon as possible.
7. After all the work is done, the last need to do an inspection work, after the whole vehicle is pasted, the situation of each window should be checked, especially the corners, and the blistering phenomenon should be dealt with immediately.
Reminder: After the film, it is required that the window cannot be opened for 2-5 days, the rear gear cannot use the defogging function, and the front windshield cannot use the air conditioner to blow the air; Do not use toothed objects to scratch the glass; After the construction is completed, the warranty application form must be filled in, so that the after-sales service in the future can be guaranteed; After 3 days of car film, it is best to go back to the store for a re-inspection, and if there is any quality problem, it should be repaired in time.
-
Hello car owners, this is not needed, does not affect the annual inspection.
-
Under normal circumstances, the car top film will not hurt the roof paint after a few years.
The relationship is the quality of the film, the first paint protection film is removed from the car paint has no effect at all, the car film on the car paint only plays a physical role in efficient protection, blocking external damage, and will not have any chemical reaction with the car paint. Of course, if the paint of your car is not the original car paint, it may also be affected.
The second is the glue used when sticking the film, a good glue, easy to paste and easy to tear, no residual glue when tearing the film, no damage to the paint, no edge.
The introduction of car tearing film is as follows:
When you need to remove the car film, it is recommended to go to a regular store to find a professional to operate. It is very discouraged for car owners to dispose of it on their own. All of them have undergone professional and systematic training, with professional props, techniques and skills, and rich experience. It is equally important to attach and remove it, and I hope that the owner will pay attention to it.
Some black-hearted merchants use domestic film as an imported film, resulting in the car owner tearing off the film after the car is full of residual glue, and more seriously, the car paint is also torn off. The real imported film will not have residual glue when it is torn off, and it will not tear off the car paint. Therefore, car owners who want to change the color of the body by applying the color change film are best to go to a professional film shop, at least the quality is guaranteed.
-
The film that does not meet the requirements of the annual examination of the car needs to be torn off.
The "Technical Conditions for Motor Vehicle Operation Safety", which came into effect on September 1, 2012, stipulates that "the driver's front and side vision must be ensured in the driver's cab, and the visible light transmittance of the front windshield and the glass outside the windshield for the driver's field of view shall not be less than 70%; The light transmittance of the two side flaps in the driver's area must also be above 50%.
Mirror-reflective sunshade film is not allowed on all windows. Among them, the part of the driver's view area of the glass outside the windshield refers to the part used to observe the rearview mirror when driving. In addition, the visible light transmittance of all window glass of highway buses, tourist buses and school buses shall be greater than or equal to 50%, and no colored paper or thermal insulation paper with opaque and any mirror reflective material shall be posted.
Although the color change of the film is different from the traditional painting color change, it also changes the appearance of the body, and the owner needs to go to the vehicle management department to go through the relevant procedures.
The vehicle management department will not carry out the registration of the vehicle color change for the "film car", and the motor vehicle with the color change film cannot pass the annual inspection. "For the 'film car', the online annual inspection is indeed a problem, if you want to pass the annual inspection, Hanchun must tear off all the color change film before going online, and this practice has the risk of damaging the car paint.
-
The question of whether the car film can be torn off and pasted again, and whether the car film can be torn off. It is also the information collected on the Internet about whether the car film can be torn off and then pasted, and whether the car film can be torn off. Let's share it with you.
1.The car film can be torn, that is, we tear our own car glass and leave glue. Cleaning up the glue can be a hassle.
2.If we tear off the car film manually, the inferior film will be easy to do. This film is sticky and easy to peel off. High-quality car film is difficult to remove. You can go to a car shop or car beauty shop and remove it with glass cleaning solution.
3.Removal method used:
4.Get rid of gas. The glue removed from the glass can be coated with gasoline.
5.Destroy the Wind Spirits. We remove with sesame oil. There may be nothing wrong with it at first. Apply sesame oil to the glue a few times, slowly for a few minutes, and the glue will be cleaned.
6.On the wagon. Applying alcohol to the car glass glue will slowly soften the glue and achieve a good cleaning effect.
7. The role of automobile window film:
8.Our automotive glass film can block ultraviolet rays, heat insulation, anti-glare, etc. In addition, it reduces UV damage and lowers the temperature in the car.
I hope it helps you through this article, and this is the end of the article.
-
Summary. Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, for you to find the corresponding problem solutions and solutions! According to your car film, the old film is not torn off and directly pasted on the question of the consultation and answer is as follows, no, the old film has been deformed or discolored or blistered, if it is directly pasted is very unsightly and affects the service life.
It is recommended that you remove the old film and clean the surface. Warm reminder: you love the car film to the professional car beauty shop, the construction technology of the film master is guaranteed, the car master will serve you wholeheartedly, I hope my answer can help you.
Hello, don't click to end, I'm textual to give you the full answer, 2-3 minutes.
My old film was not torn, and the lower film was added, what will be the effect?
Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, for you to find the corresponding problem solutions and solutions! According to your car film, the old film is not torn off and directly pasted on the question of the consultation and answer is as follows, no, the old film has been deformed or discolored or blistered, if it is directly pasted is very unsightly and affects the service life. It is recommended that you remove the old film and clean the surface.
My old film did not blister, but it became shallow, and the construction master did not tear the old film directly, so he pasted the new film on, will it blister later?
As long as it is pasted, it will not bubble in the short term.
-
Summary. I am very happy to answer for you, dear, the film is too dark or the mirror reflective sunshade film is posted, and it must be torn off to be inspected annually. During the annual inspection of the vehicle, the windshield should be complete, and the driver's field of vision should not be cracked or damaged.
If there is a car with film, should the annual inspection be torn off?
I am very happy to answer for you, dear, the film is too dark or the mirror reflective sunshade film is posted, and it must be torn off to be inspected annually. During the annual inspection of the vehicle, the windshield should be complete, and the driver should not have cracks or damage when he sees the liquid bend Nobe Kai.
According to the "Motor Vehicle Safety Technical Inspection Items and Methods" vehicle appearance inspection regulations: the appearance of the body should meet the following requirements: 1. The bumper, rearview mirror, downward view mirror and other components should be in good condition; 2. The windshield should be complete, the driver's field of vision should be free of cracks and damages, and all windshield glasses should not be posted with mirror reflective sunshade film; 3. The body of the car should be circumferential, and the height difference between the symmetrical parts of the outer edge of the body should comply with the relevant provisions of GB7258; 4. There should be no obvious mirror reflection on the outside of the body, there should be no parts and components that may touch pedestrians, cyclists and other traffic participants, and there should not be any sharp corners, sharp edges and other protrusions that may cause injury; 5. There should be no obvious rust or damage to the body (cabin) and its paint surface; 6. Spraying, pasting logos or body advertisements should not affect safe driving.
Hello, can I pass the second-hand car body film inspection?
The body is not allowed to pass the car inspection. The traffic regulations clearly stipulate that the film cannot be applied before the new car is licensed, but the decoration banquet shed that does not affect the appearance of the car can be installed. If the owner really wants to apply the film, you can put it on after the car inspection.
-
The car film can be torn off or re-pasted, which has no effect.
The removal of the car film is still more laborious, and the final tear off effect will not be too ideal, so it is recommended that the owner go to a special car film store for disassembly and assembly. If you want to replace the car film effortlessly, it is best to buy a brand of car film and a powerful store to install it before buying and installing the car film, which can reduce the risk of the film and avoid buying inferior film or fakes.
Of course, you can also use a hot air blower to heat the glass film glue, because after heating, the viscosity of the glue can be reduced a lot, and then use a soft and clean rag to wipe it clean, but do not use a blade to avoid scratching the car glass.
-
Of course, you can, because the car film also has a service life, and it will naturally age after a long time, so it needs to be replaced. However, it is not easy to tear off the car film yourself, so it is recommended to find a beauty shop to operate.
-
Hello, of course the car model can be torn off. Generally, the car film also has a service life and cycle, and when the time comes, it will be torn off and re-pasted, but it is recommended not to tear it yourself, or go to a professional car beauty shop to tear it.
-
The car film can be torn off and re-applied, and the average quality film will age in about 3 years, so it can be torn off and replaced with a new one.
-
She can tear off the car film and not use it, or you can tear it off and re-apply it to other brands of car film.
-
Yes, some young people change color every year.
Whatever you want. Car beauty people are professional.
The film should be simple.
-
Of course, this is possible, this is not much related, but you don't have to do it yourself, let a professional film person handle it for you.
-
Hello, car window film can be torn off. After tearing it off, apply a new film and you're good to go.
-
The car film can be torn off and repasted, but it is not recommended to do it yourself, please go to the beauty shop of the car to deal with it to avoid damaging the car paint.
-
If the car film is damaged, it can still be torn off and re-pasted, and you can buy it yourself and go to the film store to paste it.
-
Hello, this car sun film can be torn off and re-pasted, but it must be disposed of and pasted later?
-
You can tear it off and paste a new one, but it is recommended to call a professional person to get it, and it is not good to tear it yourself, and it is not good to paste it.
-
Hello, this car film can be torn off, and it can also be re-filmed, but the glass surface must be treated clean.
-
If you need to do the car film, you can tear it off, this depends on your needs, if you don't need it, you don't need to paste it.
-
Hello, this can generally be torn off, but it is better to call a professional to replace it.
-
This is definitely possible, the car film will age after a long time, and it needs to be replaced, but you need to go to a professional store.
-
Hello, this can be torn off if there is a problem with the quality, but the surface must be cleaned.
-
If you are not satisfied, you can tear it off and re-paste it.
-
If you tear it off, it won't stick, so don't move it.
-
Hello, tear it off and can't be reused.
-
The car film can be torn off, that is, after tearing off, glue will remain on our car glass, and it will be relatively troublesome to clean the glue. If we manually tear off the car film, the inferior film will be easier to deal with, the viscosity of this film is not very good, and it is easier to remove. High-quality car film is more difficult to remove, you can go to a car 4S shop or go to a car beauty shop to remove the leakage with professional glass cleaning and jujube liquid.
Removal method used:
1. Gasoline removal. The glue that cannot be removed from the glass can be applied to the glue with gasoline.
2. Removal of wind oil essence. We use wind oil essence to remove may not change at the beginning, repeatedly apply wind oil essence to the self-adhesive, slowly continue for a few minutes, the self-adhesive will be easy to clean.
3. Alcohol removal. The self-adhesive brushed on the car glass with alcohol will slowly soften, and it can also achieve a good cleaning effect.
The role of automotive glass film:
Our car rental glass film is mainly used to block ultraviolet rays, heat insulation, anti-glare and other functions, in addition, it can also play a role in reducing the damage caused by ultraviolet radiation to people, reduce the temperature in the car.
Millions of car purchase subsidies.
Car film is applied to car glass to control sunlight and ensure safety. >>>More
Tear it off.
1. It is recommended to tear off, the film that comes with the mobile phone is a plastic film, and the original film is only to prevent the screen from scratching, not to prevent falling; >>>More
How is car wrap implemented? What are the technologies for car wraps? How to apply film to a car? >>>More
It takes about two or three months to learn car wrap.
Generally, if you go to school, it will be about the same for two or three months. Car film is a difficult technical job, the process of film will also affect the final effect, if not necessary, it is best to leave the film work to an experienced master to complete. However, some car owners are hands-on. >>>More
Car film is easier to learn, as a project in car beauty, the learning time does not have to be too long, but the premise is that there is a period of time to be able to go to a professional school and concentrate on learning, so that one is to learn well and the other is not to waste time! >>>More