-
1.Listen to the voice.
How to check a sterling silver bracelet at home?
Check the sterling silver bracelet at home to listen to the sound. After the sterling silver bracelet falls to the ground, the real sterling silver bracelet will make a dull and faint sound, while the fake sterling silver bracelet will make a relatively crisp sound when it falls to the ground.
2.Measure hardness.
How to check a sterling silver bracelet at home?
In addition, the hardness of sterling silver bracelets can also be measured at home. The texture of the sterling silver bracelet is very soft and can be marked with a knife, but not with a fingernail. What you can mark with a fingernail or a knife is a fake sterling silver bracelet.
3.Look at the color.
How to check a sterling silver bracelet at home?
Sterling silver bracelets can also be checked by color. A real sterling silver bracelet will take on a very white and bright color, while a silver bracelet doped with other metals will turn gray and blue.
-
How to check sterling silver at home:
1. Identification method of burning silver: first put silver bars and silver bars.
Put it on the gas stove and burn it red, and then put the red-hot silver bars and silver nuggets into cold water, the sterling silver is white, and the impure silver will turn black, this method can only identify whether the purity of the silver reaches 99%, and can identify small pieces such as real and fake bracelets. The melting point of sterling silver is 960 degrees, so you can burn it boldly with confidence, and the fire of the gas stove cannot melt the silver nuggets.
2. Observation.
Look at the color of the silver: the higher the purity, the whiter the silver, and the surface of the jewelry looks even shiny and polished. If it contains lead, the jewelry will take on a blue-gray color. If copper is contained, the surface of the jewelry will appear rough and the color will not have a sense of moisture.
3. Weighing method, silver jewelry.
Weight: **Slightly denser than common metals, generally speaking: "Light aluminum, heavy silver, not light and not heavy.
Therefore, the weight can be preliminarily judged whether it is **. If the jewelry is large in size and light in weight, it can be preliminarily judged that the jewelry belongs to other metals.
4. Specific hardness, check hardness: **The hardness is lower than copper, and larger than lead and tin, and can be tested in an inconspicuous place with a pin, if the needle is slippery, it is difficult to leave traces on the surface, it can be judged as copper jewelry. If it is lead and tin texture, the traces are obvious and prominent.
If there are traces of the physical object and it is not obvious, it can be preliminarily judged to be ** jewelry.
5. Listen to the sound and rhyme: the sterling silver jewelry has a sound on the ground, no elasticity, and the sound is "Porphyry". The lower the color, the lower the sound, and the sharper and higher the voice, the higher and rhyme.
If it is copper, its voice is higher and sharper, and the rhyme is rapid and short. If it is made of lead or tin, the sound of throwing the ground is dull, short, and has no elasticity.
-
Here's how to check sterling silver at home:
Method 1: The higher the purity, the whiter the silver.
Method 2: **The density is slightly higher than that of common metals.
Method 3: Use a pin to mark the ring test, if it slips, it is difficult to leave traces for copper jewelry.
Method 4: If there are traces of the real thing and it is not obvious, it is a silver jewelry.
-
Listen to the sound, sterling silver jewelry is loud and non-elastic. But if it is copper, the sound is higher and sharper, and the rhyme is rapid and short; If it is lead or tin texture, the sound of throwing the ground is dull, short, and non-elastic. Looking at the color, the higher the purity of the silver product, the whiter the silver, the surface is evenly shiny, and there is polish.
However, if it contains lead, it will appear blue-gray; The surface of the copper contains roughness, and the color is not moisturized.
The weight generally follows the principle of light aluminum, heavy silver, and not light and heavy copper. **Slightly denser than common metals and slightly heavier. If the jewelry is large and lightweight, it can be preliminarily judged that the jewelry belongs to other metals.
Check the hardness, you can use a pin to scratch the inconspicuous place of the jewelry, if the physical object leaves traces and is not too obvious, it can be preliminarily determined to be ** jewelry. However, if the needle is slippery and it is difficult to leave traces on the surface, it can be judged to be copper jewelry; If it is lead and tin texture, the traces are obvious and prominent. Looking at the cross-section of the silver, you can judge whether it is pure or not.
A further method, only by chemical methods can the authenticity of silver jewelry be detected. In addition, the purchase of silver jewelry depends on whether there are relevant certificates, certificates, and signatures, and only silver jewelry that has been tested by testing institutions can be bought with confidence.
-
1. Check the hardness.
1. The higher the color of silver jewelry, the softer the texture, and the whiter and smoother the surface. Take a silver bracelet of about 60 grams as an example, if you pull it open with your hand, there is no elasticity, and its fineness is about 95%.
2. If there is a little elasticity, the fineness is about 80% 90%, and if the elasticity is large, the fineness is below 70%.
Second, look at the stubble.
1. Cut or fold the silver jewelry to see the color of the stubble. For example, the jewelry is soft, the stubble is thick and soft, slightly reddish, and the color is about 95%.
2. If it is bent hard by hand, the stubble is white and gray, or slightly reddish, and the color is about 90%.
3. If the hardness is large, the stubble is light red, yellow-white or gray, and the color is about 80%.
4. If it is bent and hard, the stubble is reddish, yellowish, earthy yellow and other colors, and the color is about 70%.
5. If the stubble lipstick is black or yellow with black, the color is about 60%.
3. Silver medicine wipe test.
1. Grind out the silver jewelry on the touchstone (the same as the test), and smear it on the silver with silver medicine (silver medicine is mixed with silver powder and mercury into a soft body) on the silver road.
Fourth, color discrimination.
1. Use your eyesight to identify its fineness and authenticity, high fineness, look white, delicate, shiny, and printed on the jewelry with manufacturers, store numbers and other marks.
2. The fineness is low, the color is yellowish, the workmanship is rough, and the fake silver jewelry is gray and dull, not smooth.
Fifth, the bending method.
1. Pinch the bending with your fingers, which is soft and flexible with high fineness, easy to bend and not easy to break.
2. The quality of the bending is harder, or barely folded, some can not even be folded with fingers, the silver-clad will crack after bending or knocking with a hammer a few times, and the fake one can not withstand bending and is easy to break.
Sixth, the throwing method.
1. The silver jewelry with high fineness is heavy, and it is not high to jump on the plate, and there is a "pop" sound.
2. The fake or low color is light, and it bounces very high on the plate, and the sound is relatively crisp.
-
To test whether it is sterling silver at home, you can first distinguish it from the color, which looks white and shiny, and the workmanship is fine, indicating that the purity is also higher. It can also be distinguished by weight, because silver has a higher density and is heavier than ordinary metals. You can also burn it with a lighter, after burning to 5 10 seconds, if the flame of the lighter turns green, it means that the thing is fake, and if the flame is still the primary color, it means that it is real.
-
Sterling silver can be observed at home color, sterling silver can show a very white, bright color, if the appearance of sterling silver is blue, it means that sterling silver contains a certain amount of other materials. It can also be identified by looking at the hardness, the texture of sterling silver is very soft and can be bent by hand, but it cannot be broken, while silver with low purity is hard and may break when bent.
At home, it's very troublesome, it's not enough to do a single abdominal muscle connection, and the best effect is to combine multiple muscles to train muscles, that is, you have to contact your hands and feet together The effect is good, and the single abdominal muscles I estimate that practicing brother will not have much effect for a year, I used to practice for a year to train abdominal muscles every day to do hundreds at a time (the action is not very standard when the practice is done later) After practicing for a year, in addition to the muscles are hard, I don't feel that there is a big change, if you are at home, you can buy some equipment, If you don't want to buy it, you can also contact yourself, but the effect is a little slow, you can warm up with a run for 10 minutes before exercising every day (if you can't go out for a run, do something else at home to dance and jump) as long as you can warm up, and then do muscle exercises It is best to do push-ups and sit-ups combined, and it is better to add some squats and jump ropes, muscle exercises for more than 30 minutes, be sure to be exhausted, after the most important thing is here, after muscle exercises, rest for a few minutes and drink some light salt water, go for a jog You better go for a run Although you can do other aerobic work, but you don't have to run as well, there is simple, running for more than 30 minutes, because 10 minutes is a warm-up, and the fat starts to burn after 30 minutes, that is to say, if you don't run for an extra minute after 30 minutes, you will burn more fat, but you must do what you can at the beginning.
HomemadeStyrofoamFirst of all, you need to prepare clear glueGlycerinPour a small amount of laundry detergent into a clean container, then pour an appropriate amount of 100 ml of liquid glue, pour an appropriate amount of glycerin into it, stir it all the time, and finally add a large amount of foam, add a small amount of molding water many times until it is formed. >>>More
Buy a yogurt maker, buy some milk, and yeast for yogurt, just follow the yogurt maker's instructions.
So how do you make healthy and delicious sweets at home? Some people are afraid of trouble and are reluctant to do it, but in fact, the dessert can also be very simple
There are two general ways to remove moles.
One is to configure dilute sulfuric acid and corrode it with sulfuric acid, which must be matched by professional people, and you can't fool around, and second, burn with laser, which is only available in this general hospital. >>>More