Refrigerator Intelligent temperature adjustment Manual temperature adjustment which saves electricit

Refrigerator intelligent temperature control and power saving.

Power-saving method: 1. When using the refrigerator, adjust the temperature adjustment gear to a low gear, and the more suitable gear is 1-3 gear.

2. The refrigerator needs to be placed as far as possible without a heat source, and it is most suitable in a well-ventilated place to have enough space for heat dissipation.

3. It is necessary to minimize the number of times the refrigerator opens and closes the door, shorten the time to open the door, and the door needs to be closed in place.

4. It is best to wait until the hot food is cooled before putting it in the refrigerator, and the food with high moisture needs to be packed with plastic wrap.

The temperature of the refrigerator compartment is regulated in winter and summer.

In summer, in the process of using the refrigerator, the external environment is too high, and the temperature in the refrigerator is very difficult to drop by one degree, and it is also very quickly lost through the box insulation layer and door seal, so the temperature of the refrigerator refrigerator in summer can be adjusted in the weak 2-3 gears.

The refrigeration environment in winter is relatively low, and refrigeration is easy to achieve, so the temperature of the refrigerator refrigerator is set at 4 gears, which can be controlled between 0 and 10 degrees.

Of course, it is manually adjusted, and the temperature is set higher than that of artificial intelligence to save power.

The so-called intelligent and precise temperature control is just a concept hyped up by various manufacturers. There is no clear standard for how accurate intelligent and precise temperature control can be.

Intelligent and precise temperature control is to use several temperature probes placed in the refrigeration and freezer chambers to process the sampled data through a single-chip microcomputer to obtain a value, and then use this value to compare with the data stored in the single-chip microcomputer and then control the compressor to start or stop.

Generally, it is better to adjust it by hand.

The higher the temperature in the refrigerator, the more electricity will be saved, provided that the food in the refrigerator is frozen and fresh.

Under normal circumstances, the freezer should be set up and adjusted at about minus 18 degrees, and the refrigerator room should be about 5 degrees, which is not only conducive to the freezing and preservation of food, but also relatively energy-saving. If there is no food in the freezer that needs to be stored for a long time, the temperature can be turned up higher, for example, to about -12 degrees, which is particularly energy-efficient, especially in summer. The same goes for the refrigerator, if there is no special requirement for food preservation, the temperature can be appropriately adjusted to between 8-12 degrees, which is also more energy-efficient.

Attached to the common sense of refrigerator use:

1. After the new refrigerator is purchased, it should be wiped several times with a clean rag, but do not close the door after wiping it clean, open the door to let the odor inside dissipate and then use the electricity, or use an electric fan to blow it inside to speed up the emission of the odor.

2. After the new refrigerator is carried back, it should be left to stand for a few hours before powering on the test.

3. The refrigerator should be placed in a cool and ventilated position, and a certain amount of space should be left around it to facilitate the ventilation and heat dissipation of the refrigerator and improve its refrigeration efficiency.

4. When the machine is powered on, the temperature setting of the freezer should be adjusted to minus 18 degrees, and the temperature of the refrigerator should be about 2-6 degrees. The mechanical thermostat should adjust the size of the digital gear according to the ambient temperature of the season, adjust the smaller digital gear in summer, adjust the middle gear in spring and autumn, and adjust it in the larger digital gear in winter.

5. When the machine is powered on, do not put in the food first, wait for the temperature in the refrigerator to drop and stabilize, and then slowly put in the food after the compressor starts and stops normally, and do not put too much food at one time to avoid overload of the compressor.

6. The food placed in the refrigerator should be sealed and wrapped in a container or food bag to avoid odor caused by mutual odor.

Now refrigerators are generally divided into two kinds, one is artificial intelligence, and the other is old-fashioned tradition, and smart refrigerators naturally do not need to adjust the temperature. So, how much is the temperature of the old-fashioned traditional refrigerator appropriate, and how to adjust the temperature of the refrigerator about electricity? The following will take you to understand the correct way to adjust the temperature of the refrigerator.

1. How much is the appropriate temperature of the refrigerator?

1. Keep the refrigerator at 5 degrees and the freezer at minus 18 degrees. The temperature of the freezer is fixed at minus 18 degrees, while the temperature of the cold room can be adjusted between 4-10 degrees depending on the seasonal temperature change, and the adjustment method is achieved through a temperature regulator. Refrigerator thermostats are also known as temperature controllers or temperature control switches.

Its function is to set a reasonable gear according to the ambient temperature, so that the refrigerator compressor can work more efficiently and prolong its service life.

2. If the thermostat of the refrigerator is mechanical, the gear should be adjusted according to the seasonal temperature, and it should be set at 1-2 gears in summer, about 3 gears in spring and autumn, and 4-5 gears in winter. In addition, the refrigerator should be placed in a cool and ventilated place, and a certain amount of space should be left around it to facilitate the ventilation and heat dissipation of the refrigerator and improve work efficiency.

2. How to adjust the temperature of the refrigerator about electricity.

1. Adjust the temperature of the refrigerator in summer.

In summer, due to the large temperature difference between the indoor and outdoor refrigerators, the refrigerator dissipates heat quickly. When the temperature of the refrigerator reaches the induction temperature of the refrigerator, the compressor will work. If the temperature of the refrigerator is too low and the gear is too high, the refrigerator will continue to work, which will not only waste electricity, but also shorten the life of the compressor.

It is generally suitable for setting in 2-3 gear in summer. If the outside temperature is too high above 40, it is also good to set it to Variable 1.

2. Adjust the temperature of the refrigerator in winter.

In contrast to summer, outdoor temperatures are cooler, especially in areas of the south where there is no heating. Because the temperature difference between the refrigerator and the air is relatively small in winter, the heat dissipation of the refrigerator is relatively slow, and if the temperature of the refrigerator is too low, the freezer will thaw, which is not conducive to the preservation of food. So in winter, you should instead adjust the gear to high gear, and 5-6 gear is the most suitable.

If the outside temperature is below 8-10, it is more economical to keep some food outside the refrigerator.

The higher the temperature in the refrigerator, the more electricity is saved, and the lower the adjustment, the more electricity is consumed.

Under normal circumstances, the freezer should be set and adjusted at about minus 18 degrees, and the cold shock room should be set at about 5 degrees. This is not only conducive to the freezing and preservation of food, but also relatively energy-saving.

The lower the temperature, the greater the power consumption of tung dust, but it is more beneficial to the freezing and preservation of food.

In winter, due to the low ambient temperature, the power consumption of the refrigerator is very small, so there is no need to consider the power consumption of the refrigerator, mainly because the power consumption in summer is very large, and it should be reasonably set up and used.

The refrigerator has different adjustment degrees in different seasons, some gear controllers are 5 gears, 7 gears and some other gears, but the principle is the same: the larger the gear number, the lower the temperature, 0 gear is the shutdown gear, and the highest gear is the forced refrigeration gear. For the sake of description, the following takes 7 files as an example:

In summer, it will be adjusted to 2-4 gear.

The working principle of the refrigerator is the heat transfer between the ambient temperature and the temperature in the box, the larger the temperature difference, the longer the refrigerator runs, and the more electricity is consumed. Therefore, in summer, the temperature should be adjusted slightly higher, and the gear can be set at 2-4 gears to reduce the gap with the ambient temperature. This can not only ensure the temperature required for food preservation, but also reduce the working pressure of the refrigerator in the hot summer, reduce the operating burden of the Shenxing compressor, and save some electricity.

In spring and autumn, adjust to about 4 gears, and the temperature in spring and autumn is moderate, in the same way, the refrigerator can be set at about 4 gears.

The winter gear is set to 4-6 gears, the ambient temperature in winter is low, and when it is lower than 10, the refrigerator will not start, and then the low temperature compensation switch needs to be turned on (the old refrigerator only has this switch)** The refrigerator has been changed to a blind magnetic switch, which automatically controls the start and stop of low temperature compensation, without manual adjustment, and at the same time adjusts the temperature control knob to 4-6 gears to ensure the normal operation of the refrigerator.

The highest setting is the forced refrigeration setting, when the refrigerator does not stop running. Note: Do not use this gear for a long time, otherwise it will cause injury to the compressor.

Note: Close the refrigerator door to ensure that the refrigerator door is tightly sealed. Forgetting to close the door or not closing it tightly will lead to problems such as cold leakage in the refrigerator, poor refrigeration effect, and non-shutdown of the temperature in the box if the temperature in the box does not reach the set temperature.

In order to achieve the purpose of food preservation and power saving, we can hit the 1st or 2nd gear in summer and the 4th or 5th gear in winter. Some people may want to ask, in winter, the temperature is low, but the temperature is set low (the thermostat value is large), and in the summer, the temperature is high, but the temperature is set high (the thermostat value is small), is it the opposite? In fact, many people have the misconception of side-infiltration, thinking that the temperature of the refrigerator can be set high when the temperature of the ridge is low in winter, and the temperature should be set low when the temperature is high in summer.

In fact, the temperature of the refrigerator is adjusted to the same temperature as the ambient temperature, which is the most energy-efficient, but obviously this is impossible, so we adjust the temperature of the refrigerator with auspiciousness. It's 10 degrees different from the ambient temperature, so it's basically 50 or 60 percent of the power consumption.

The specific method of adjusting the temperature of the touch screen of the smart refrigerator is as follows: lack of Zen

Tool: Haier smart refrigerator.

1. Press the "Smart" button on the control panel of the refrigerator, the icon E lights up, press again to exit the smart function state, and you can adjust it.

2. Press the "Refrigeration" button to display the current temperature of the refrigerator, and reduce the temperature of the refrigerator by 1 each time.

3. Press the "Freezing" button to display the current freezer temperature, and the temperature of the freezer room will be lowered by 1 each time. After 5 seconds of operation, there is no button, that is, the temperature adjustment of the refrigerator freezer is completed.

Four common display refrigerators, one of which is a visual collapse and a frequent reputation, is a silver and white group!

If the temperature is adjusted, the refrigerator room is between -2 -8 degrees, the freezer temperature is about -18 -24 degrees, and the temperature of the refrigerator should be adjusted to 2-3 gears in summer.

The temperature control knob of the refrigerator generally has five gears, or gears, in which the 0 gear is the shutdown gear and the forced cold gear is the forced cold gear.

When the thermostat is adjusted to the forced cooling setting, the compressor will continue to work due to the low control temperature, and the refrigerator will be in a state of non-stop almost all the time. The higher the number of the thermostat, the lower the temperature of the freezer.

Power-saving skills: The location of the refrigerator should be to avoid direct sunlight, facilitate ventilation, and keep a distance from the wall, so that the heat generated by the slag can be dissipated during the operation of the refrigerator.

Always check the tightness of the refrigerator seal, if the seal is deformed, it will affect the degree of closure of the seam, and the beam will cause the leakage of air conditioning, thereby increasing power consumption. If the deformation is serious, it should be repaired and replaced in time.

It can be adjusted in the low gear in summer, between 1-3 gears, in spring and autumn it can be adjusted in the middle gear, and in winter it can be adjusted up appropriately, and at the same time turn on the winter temperature compensation switch, but don't forget to turn it off when the temperature warms up, otherwise it will be very power-consuming.

Note: When the room temperature is below 10 °C, the thermostat should be set to the "6" position. 7 is the highest gear, adjusted to the quick-freezing state of the refrigerator, after use needs to be turned back, otherwise the refrigerator will not stop working.

If you want to save trouble, you can adjust the thermostat to the middle gear. Remember: without affecting the freshness of the refrigerator, setting the thermostat to a low setting (first gear) is the most energy-efficient.

Precautions for using the refrigerator.

The temperature of the freezer should be minus 18 degrees, and the temperature of the refrigerator should be between 4-8 degrees. Of course, if there is less food in the refrigerator, or there are no special requirements, the storage time is shorter, and in the case of food freezing and preservation, the higher the temperature of the refrigerator, the more electricity will be saved.

In addition, the refrigerator should be placed in a cool and ventilated position, and a certain amount of space should be left around it to facilitate ventilation and heat dissipation. At present, the condensation stool (radiator) of the refrigerator is designed to be installed on both sides of the refrigerator, and the heat dissipation and compression are carried out through the refrigerator shell.

The higher the number, the lower the temperature in the freezer. Generally, in spring and autumn, we put it in 3 gears to collapse, depending on your requirements, whether the freezer can reach below minus 18 degrees. In order to brighten the hail to achieve the purpose of food preservation and power saving, we can hit the 1st or 2nd gear in the summer, and the 4th or 5th gear in the winter.

Summary. The freezer chamber is -18 degrees Celsius instead of -22 degrees Celsius, which can save 30% of electricity consumption. Go to the store and sell two super ice packs, put them in the refrigerator, and when the refrigerator starts to cool, the ice packs will absorb the excess heat in the freezer.

Because the thermal resistance of the ice pack is more than the thermal resistance of the refrigerator insulation layer, it plays a role in cold storage and reduces the loss of cold capacity of the refrigerator, so it plays a role in cold storage and reduces the loss of cold capacity of the refrigerator. It has been determined that using this method can save about 6 kilowatt hours of electricity per month, I hope mine is helpful to you.

Hello dear, I'm glad to answer for you: the outdoor temperature is high in summer, and the temperature control can be adjusted at 4-5 gears; The ambient temperature is low in winter, and the temperature control can be adjusted in 2-3 gears; The freezer room is replaced by -18 degrees Celsius instead of -22 degrees Celsius, which can save 30% of the electricity consumption. Go to the store and sell two super ice packs, put them in the refrigerator, and when the refrigerator starts to cool, the ice packs will absorb the excess heat in the freezer.

Because the thermal resistance of the ice pack is more than the thermal resistance of the refrigerator insulation layer, it plays a role in cold storage and reduces the loss of cold capacity of the refrigerator, so it plays a role in cold storage and reduces the loss of cold capacity of the refrigerator. It has been determined that using this method can save about 6 kilowatt hours of electricity per month, I hope mine is helpful to you.

There is no switch in the freezer compartment how to adjust.

Hello dear, I'm glad to answer for you: the freezer does not have to adjust the liquid manuscript as long as the temperature of the upper layer is well adjusted, the temperature of the potato and the lower layer will be synchronized, don't worry about this pro, I hope my hand filial piety will help you.

Hello dear, I'm glad to answer for you: this is the adjustment button to turn it to the potato and the right position, you can just make a fool of yourself to adjust the temperature and liquid manuscript degree will be synchronized, I hope mine is helpful to you.