How can the partition design of the bathroom be moisture proof and more practical? What do I need to

The distribution of common functions in the restroom is mainly divided into two categories: necessary and non-essential: we can choose which functions to keep in the restroom according to the actual situation. In general home decoration, the bathroom retains the three basic functions of shower, toilet and washstand.

So around these three functions, what is the most reasonable layout of the bathroom?

to use frequency fixed lines. In terms of frequency of use: 1. Washing area; 2. a toilet; 3. Shower. The most commonly used washing area is placed at the door, whether it is washing in the morning and evening, or after going to the toilet, return to the sink to wash your hands, and go out in one go.

The least frequently used shower area of the three is placed at the end of the circulation. Rectangular toilet rectangular toilet is generally divided from the outside to the inside: washbasin, toilet, shower room, and the shower room is generally separated by a glass sliding door, and the living line is also very comfortable.

If the door is open on the long side, the toilet or wash basin can also be arranged on the opposite side of the door, and the shower area is arranged on the side behind the door. Square BathroomsSquare or near-square bathrooms are usually planned in the form of tree branches. By reducing the length of the shower room, arrange the shower room at the opposite corner of the door, and then place the wash basin and toilet in the corners on both sides.

Separation (or dry and wet separation) bath fog will affect many bathroom electrical equipment, wet will be short circuit, even cut short electrical appliances, and will also wet some paper towels and other supplies, moisture and dust mixed together is not easy to take care of, so the bathroom is best to be closed and independent. Separating the bathroom is the easiest and most space-saving, it doesn't take up much space, but it is more effective in preventing moisture from spreading.

Originating from Japan, the three separate spaces are completely separated from the dry area, the wet area, and the toilet. The wet area is: shower room; The dry area section is:

Washbasins, toilets. The benefits of separation are obvious, on the one hand, it can enable multiple people to use the bathroom at the same time, improving efficiency; At the same time, it saves the passage space and makes the space more comfortable and convenient.

When designing partitions, we must choose some moisture-proof materials, and we must plan reasonably to try to separate the space and use it; It is necessary to pay attention to its size, as well as the spatial distribution on the partition.

In the process of decoration of the bathroom, we must make partitions according to the actual situation, and try to make a bathroom with dry and wet separation. In this way, it will be more convenient to use.

I really don't know, I haven't understood, and many people have big questions about this issue.

You can add a partition, the partition not only has the function of separating the space, but also a common way to save space, and at the same time has a good decorative and aesthetic effect, which is a good bathroom design. In addition, the design principle of partition 1 and the design of sanitary partition should comprehensively consider the three functions of washing, bathroom and toilet. 2. The design of the sanitary partition shall not affect the lighting and ventilation effect of the bathroom, the concealment of the wires and the selection of electrical equipment shall comply with the relevant safety provisions of the electrical regulations.

3. The floor of the bathroom should be made of tiles, stones and other materials that are waterproof, dirt-resistant, non-slip and easy to clean.

When the bathroom partition is designed, the walls and floors of the bathroom are made of marble, which will give people a fashionable feeling, and the design of the ceiling is very prominent, showing the classical temperament of European style, and the whole design gives people a comfortable and romantic environment.

When designing sanitary partitions, we need to pay attention to the shaping of the image. Because the partition is not load-bearing, the degree of freedom of modeling is great, and the design should pay attention to the change and unity of height, length and virtual reality.

If you want to do partition design in the bathroom, you can use frosted glass to do, the partition is very beautiful, and the moisture-proof effect of frosted glass is also very good, if you want to be more fashionable, then you can consider making a half partition, and you must do a good job of waterproof layer after doing the partition.

The design material of the bathroom should first choose waterproof and moisture-proof, high safety performance, and the partition design can use glass partition, which can make the bathroom look translucent and spacious, and it is more practical and wear-resistant, or frosted glass is also a good choice, which is not only beautiful but also plays a role in avoiding peeping.

Acrylic can be used as a partition to make the light in the bathroom look more transparent, and it will also make us look more beautiful now. Acrylic can not only have an aesthetic effect, but also play a better moisture-proof effect, and will make the bathroom space look larger.

You can choose a glass partition, which can ensure lighting, very beautiful, particularly fashionable and beautiful, moisture-proof effect is very good, according to the size of the design.

You can choose frosted glass as a partition, which can protect your privacy well at this time, and the service life is relatively long.

How to prevent moisture in the bathroom? What are the treatment methods for moisture-proof bathroom walls? The moisture return of the bathroom wall is generally due to the fact that the waterproofing of the bathroom wall is not done well or is damaged, resulting in water seeping into the wall, and then causing the bathroom wall or nearby wall to be waterproof.

If you want to prevent the bathroom wall from getting wet, it is best to do the moisture in the bathroom wall again, and after each shower, you should use a towel or mop to dry the water vapor of the internal structure of the bathroom, so that the internal structure of the bathroom has been kept dry, which can reasonably prevent the moisture of the bathroom wall.

If the dampness in the bathroom wall is relatively mild, then you can use some dehumidifying products to remove the moisture on the wall, such as: activated carbon, lime powder, etc., those objects are all excellent waterproof, moisture absorption and other effects. If lime powder is used, the lime powder can be put into a small cloth bag, and then placed in the closest place to the moisture-proof part of the wall of the toilet, which can not only remove moisture, but also have the effect of disinfection and sterilization.

It is also possible that the water pipe near the toilet is ruptured, causing water to seep into the wall, so of course the bathroom wall will be waterproof. We can carry out pressure pump testing on the pipeline to see if there is any problem with the pressure, and if so, we must look for the seepage seat of the water pipe, and we must ask a professional to carry out maintenance of the seepage pipeline.

The bathroom cabinet is very easy to deform when it is not tightly closed, and the paint will fall off, so in the case of selection, it is recommended to choose a material with better waterproof characteristics. In addition, if the bathroom cabinet storage and finishing place is sprinkled with water, the sanitary ware objects will have a pungent smell after returning to moisture, and there will be mildew in serious cases, in order to better maintain the storage items, put moisture-proof agents in the bathroom cabinet.

When the bathroom is moisture-proof, it is necessary to invite a professional construction team to carry out the construction, and the moisture-proof and waterproof must be done well, so that it will be more comfortable in the future use.

If you want to prevent the bathroom wall from getting wet, it is best to do the moisture in the bathroom wall again, and after each shower, you should use a towel or mop to dry the water vapor of the internal structure of the bathroom, so that the internal structure of the bathroom has been kept dry, which can reasonably prevent the moisture of the bathroom wall.

There are many ways to keep the bathroom out of moisture. If the bathroom wall is damp, you should clean the liver as soon as possible, after all, you should keep the windows open and ventilated.

When decorating the bathroom, the needs of waterproof and moisture-proof should be considered from the laying of wall and floor tiles, ceiling treatment, pipe installation and equipment selection, and careful arrangements should be made. Now go and learn how to prevent moisture during the bathroom renovation process.

1. It is recommended to use microporous aluminum gusset for the ceiling to enhance ventilation and prevent condensation. If you make a gypsum board ceiling, you should first brush waterproof putty, and then brush waterproof coating; PVC ceilings are prone to condensation and dripping, so they should be used with caution. In the bathroom, the use of wooden materials should be avoided, and when it is really necessary, fireproof board or hand decoration should be used with full mixed oil, which can be waterproof.

When doing ceiling or other package decoration, the hidden wooden keel needs to be brushed with waterproof paint or preservative.

2. The installation of pipelines should avoid changing the original upper and lower open pipes as much as possible, and the decoration should be done horizontally and vertically, laid firmly, and the slope of the potatoes should meet the requirements. The valve and faucet are installed flat, flexible and convenient to use, and the open pipe is brushed with anti-rust paint, and the hidden pipe is brushed with anti-corrosion paint. The water supply pipeline is tightly connected with accessories and appliances, and there is no leakage after the water test.

The floor drain design should still be based on the water supply and water pipes, and the surface should be slightly lower than the ground.

3. The sanitary appliances are installed in the correct position, and the upper edge of the appliances should be horizontal. Bathroom appliances should choose branded and waterproof products, such as bath warmers used in a humid environment for a long time, the shell should be made of stainless steel, with good anti-corrosion performance, and with waterproof power switches, cables and plugs, not afraid of water showers and splashes when powered on or powered off, and will not cause leakage or damage. It also needs to be equipped with waterproof lampshades, waterproof sockets, etc.

Four wall floor tiles, stone laying should be done under the surface layer of the waterproof layer, the use of cement mortar to level the ground, waterproof coating, and then spread a layer of 1 to 2 cement mortar as a binding layer, the floor tiles and other decorative materials paved up, watered with a wooden board to shoot solid, to achieve smooth and firm, tight joints. Before the stone is paved, the back coating should be done to reduce the occurrence of "water stains". The contact between the waterproof layer and the wall should be turned upwards to about 25 to 30 cm above the ground, the washbasin should be more than one meter above the ground, and the shower room should be more than one meter above the ground.

If you do paint decoration, you should first brush waterproof putty and choose waterproof paint. To deal with the surface of the ground layer of the water to slope to the floor drain, no flooding, no water accumulation, after 24 hours of water storage test no leakage.

It is very important to maintain a well-ventilated environment in the bathroom. Choosing better quality ventilation equipment can help moisture and vapor volatilize quickly and keep the room fresh and clean. Finally, it is worth mentioning that no matter how the bathroom moisture-proof practice is done, we still have to take the initiative to understand how the bathroom is moisture-proof.

Because I think that in order to effectively carry out the bathroom moisture-proof, we must have some toilet safety knowledge, and it is necessary to install a ventilator, so that the bathroom moisture-proof treatment can be put in place in time. In this way, tragic accidents can be avoided.

First, the choice of substrate.

The area of the bathroom is usually not large, and it is really difficult to separate the dry and wet in an area of a few square meters, so we have to hope for the basic materials with moisture-proof engineering. Therefore, it is recommended that the bathroom cabinet selected should have better moisture-proof performance in terms of material and technology. If the product is fully ventilated, there is no problem if the humidity reaches 95% in a short period of time, because it will dry out in a short time.

Second, panel selection.

The first barrier between bathroom furniture and the humid air in the room is the furniture panel, so the advantages and disadvantages of the panel are also a problem that we need to consider. In the face of the dazzling array of leaky oak panels on the market, the owners must not have any choice when purchasing, and the panel must be selected to suit themselves. High-quality solid wood veneer and wood grain with plastic resin protection are easier to maintain and have a classic aesthetic in terms of decorative effect.

3. Internal moisture-proof.

A common phenomenon in the bathroom is that the low floor of the sink cabinet will be deformed after a period of use, because the water pipes hidden in the cabinet are not taken seriously. Because the water pipe is relatively hidden, it was installed without considering the stability, so the low waterside of the cabinet remained and soaked the furniture, resulting in an irretrievable situation over time. Therefore, it is necessary to use a waterproof aluminum bottom plate with a waterproof bumper strip, and this will not be the case.

Fourth, pay attention to the installation process.

Be sure to pay attention to the sanitary ware in the bathroom. While choosing bathroom furniture is important, it is only the first step, and the installation process is equally important, and if you don't do it well, it will be useless. You must know that water droplets and water vapor are pervasive, and it is best to do a good job of waterproof and moisture-proof, and you must do a good job in the installation of bathroom furniture.