How to remove the phone film at home without tools?

How to remove the tempered film of the mobile phone:

1. Method 1: First of all, you can't scratch the mobile phone screen with a sharp blade. Remove the horn and microphone with scotch tape to prevent water ingress.

Start to warm the screen with hot water 7-10 times, you can tear it off by hand, if it is not thorough, repeat it, wipe off the screen glue with alcohol, tear off the speaker microphone hole tape, and paste a new film.

2. Method 2: When taking the tempered film, use the wide tape to stick the top first, and then use the fingernail to scratch it a little bit, and lift the tape to remove the whole tempered glass film.

3. Method 3: As long as you gently pick the corners of the toughened glass protective film of the mobile phone with your fingernails, it will appear a little blister. Then the protection can be torn off directly, and there will be no glue on it, which is very easy and convenient.

If it is a very ordinary protective film, you use the tip of a very sharp knife to carefully pick out a corner of the protective film, or keep picking it out with your hand.

Extended Materials. Product performance.

The tempered film is to prevent the screen from breaking when the phone slips. Not for scratch resistance. Ordinary films are 3h hardness, and there will not be too many scratches after a few months of use

High hardness, low toughness, the phone dropped, can be a good shatterproof screen. When the mobile phone falls to the ground, the impact is very large, and the screen will be broken if the tension is too large. The toughness of the tempered film is low, and when the tension is transmitted by the mobile phone, the film will withstand the tension, which greatly reduces the tension of the main screen.

Product pros and cons. How to identify a good tempered glass protective film:

1. Poor exhaust and residual bubbles on the surface of the mobile phone;

2. The corners around the tempered glass cannot be pasted and bubbles are formed;

3. The tempered glass cannot be adhered to the mobile phone and is easy to fall off;

4. The tempered glass is too thick, which affects the light transmittance and thickens the thickness of the mobile phone;

5. The glue pasted with tempered glass is too thick, which affects the light transmittance of the mobile phone;

6. After the tempered glass is pasted on the mobile phone, there is a watermark on the surface of the mobile phone.

7. The tempered glass film is also divided into straight edge and arc edge, and the arc edge is more rounded than the hypotenuse edge, which is not easy to hurt the hand.

If you have a mobile phone film, it is best to use some tools, and you may not be able to install the mobile phone film without tools.

Summary. Hello, I am happy to serve you: First, although the tempered film is hard and brittle, it is actually connected by a layer of adhesive film inside, when the user wants to replace or tear off the tempered film, as long as the corners and gaps along the contact between the tempered film and the mobile phone, pull it hard.

Because the tempered film itself is a whole, as long as the tempered film is not particularly broken, and the mobile phone screen itself is not damaged, it will be torn off directly. 2. If the plastic scraper is too firmly glued to the screen, the shape of the tempered film is too close to the mobile phone screen, and it cannot be "manually" torn off through the gap between the tempered film and the mobile phone screen. Because the mobile phone screen itself has a layer of cover glass, although the drop resistance is very poor, but the hardness is still very passable, as long as the plastic scraper is used to stick to the gap between the tempered film and the mobile phone screen, poke it in, and then tear it off gently.

3. The heating tempered film is composed of two parts, one part is the outer layer of tempered glass, and the other layer is adhesive tape, its function is to glue the tempered film on the screen of the mobile phone, if the tempered film can not be removed manually and with a plastic scraper, you can try to use a hair dryer to heat the screen. Because the glue on the tempered film will soften and melt if preheated, it cannot be torn off because it is relatively firm before, and after heating with a hair dryer, you can tear off the tempered film manually or with a plastic scraper.

How to tear off the original film of the mobile phone.

Hello, I am happy to serve you: First, although the tempered film is hard and brittle, it is actually connected by a layer of adhesive film inside, when the user wants to replace or tear off the tempered film, as long as the corners and gaps along the contact between the tempered film and the mobile phone, pull it hard. Because the tempered film itself is a whole, as long as the tempered film is not particularly broken, and the mobile phone screen itself is not damaged, it will be torn off directly.

2. If the plastic scraper is too firmly glued to the screen, the shape of the tempered film is too close to the mobile phone screen, and it cannot be "manually" torn off through the gap between the tempered film and the mobile phone screen. Because the mobile phone screen itself has a layer of cover glass, although the drop resistance is very poor, but the hardness is still very passable, as long as the plastic scraper is used to stick to the gap between the tempered film and the mobile phone screen, poke it in, and then tear it off gently. 3. The heating tempered film is composed of two parts, one part is the outer layer of tempered glass, and the other layer is adhesive tape, its function is to glue the tempered film on the screen of the mobile phone, if the tempered film can not be removed manually and with a plastic scraper, you can try to use a hair dryer to heat the screen.

Because the glue on the tempered film will soften and melt if preheated, it cannot be torn off because it is relatively firm before, and after heating with a hair dryer, you can tear off the tempered film manually or with a plastic scraper.

Here's how to fix it.

The specific steps to tear off the mobile phone film are as follows:Tools: iPhone, mobile phoneTempered film

1. Find a tool to tear off the old film and pry up the corner.

2. Pry up the other corner, hold the tempered film at this time, and then slowly tear it off.

3. If the toughened film is sticky and can't be broken with your fingers, you need to use a hair dryer.

4. Use a hot blow dryer to evenly heat the mobile phone film, the temperature is not too high, and you can tear it off directly by hand.

First, tape the amplifier, charging port, and other areas where water may enter. Prepare hot water above 70 degrees Celsius, and use a clean glasses cloth dipped in hot water to repeatedly wipe the phone screen with the old film on it. After a few minutes, the film on the screen will be a little loose, and then you can slowly tear it off with your fingers.

This method works for most phones like Apple, Huawei, etc.

Methods to prevent tempered film fragmentation:

Sometimes the tempered film will be broken when the tempered film is torn, you can put a wide transparent tape on the tempered film, and then use the above method to tear the tempered film, so as to prevent the tempered film fragments from falling down.

Place your phone on a flat table. Use your hand along the edge of the phone and gently clasp the corner of the tempered film. When the corner of the tempered film is lifted, the tempered film can be broken down along the direction of the paste.

In the case that you can't buckle the corner of the tempered film, you can use a knife to insert the tempered film, insert it in parallel to avoid damaging the phone, and then tilt it slightly until it blisters. Then the fingers break the two corners and pull them up, and the tempered film can be easily removed.

Function: The mobile phone protective film can absorb the free electromagnetic waves generated during the work of the mobile phone display screen and reduce the harm of electromagnetic radiation. It can prevent the glass panel from breaking and scattering caused by accidental impact of the mobile phone, and ensure the safety of users.

At the same time, it prevents accidental scratches and affects the beauty of the mobile phone. Prevent ultraviolet rays and electrical radiation energy from passing, and protect ** from drying and aging of the stratum corneum due to long-term contact with the bright light of the mobile phone and computer screen, stimulate the production of melanin, and promote the generation of macular and freckles.

Attach the tape to the phone screen, press it tightly, and tear it off along one corner.

Tool Material: Adhesive tape.

1. First of all, attach the tape to the phone screen.

2. Then press the tape tightly.

3. After that, set off a corner.

4. Then along the side of the phone, lift it up.

5. Finally, the mobile phone film was successfully torn off.

Notes:After the tape is attached to the phone screen, be sure to press it tightly before it can be completely removed.