Is the decoration to scrape putty first or make cabinets first? What is the correct decoration seque

When doing interior decoration, the correct order should be to scrape putty first and then make cabinets. First of all, scraping putty is the basic project of interior decoration, and its main role is to make the wall smooth and provide a good foundation for the subsequent wall decoration. If you make the cabinet first, it may affect the working effect of scraping putty, and may even cause the cabinet to be contaminated with putty.

If you want to know the specific decoration**, you can use the "decoration artifact" ** device to calculate, just enter the area + city, immediately calculate the local decoration**, list the detailed list of 102 decorations, so that you don't have to worry about overspending on the decoration, click here to start calculating: [3 seconds to get the local decoration**].

In the Chinese market, the first putty scraper is roughly between 30-50 yuan square meters, while the cabinet is different according to the material, design and production process, generally between 1000-3000 yuan square meters. These ** are for reference only, and the specific ** needs to be determined according to the actual situation and the ** of the decoration company.

When carrying out interior decoration, it is recommended that the owner should have a detailed understanding of the decoration process and ** when choosing a decoration company, so as to avoid poor decoration results or exceeding the budget due to lack of understanding of the decoration process. At the same time, it is also necessary to pay attention to protecting the completed decoration project to avoid damaging the completed part when carrying out subsequent decoration. In addition, scraping putty and making cabinets are both jobs that require a certain amount of skill, so it is also very important to choose experienced and skilled workers to carry out these tasks.

Tuba Rabbit is one of the largest decoration platforms in China, with a total of more than 41 million owners, 110,000 decoration companies, covering more than 300 cities across the country, user reputation is very good, not only to meet your decoration needs, but also to provide professional decoration companies according to your budget, want to find a good company, learn more about decoration knowledge on Tuba Rabbit, click here, free 1 to 1 for your home decoration services: [Tuba Rabbit ** official website].

Kunming - [Kunming Decoration Strategy Guide].

Suzhou - [Suzhou Decoration Strategy Guide].

Hefei - [Hefei Decoration Strategy Guide].

Fuzhou - [Fuzhou Decoration Strategy Guide].

Beijing - [Beijing Decoration Strategy Guide].

Dalian - [Dalian Decoration Strategy Book].

Hangzhou - [Hangzhou Decoration Strategy Guide].

Shanghai - [Shanghai Decoration Strategy Guide].

Tianjin——[Tianjin Decoration Strategy Guide].

FirstScrape puttyOr hit the cabinet first If the cabinet is made on the spot, you can install the cabinet first and then scrape the putty, although the back of the cabinet is likely to be scraped, but the impact is not great。If the cabinet is custom-made, you can scrape the putty first and then install the cabinet, which can enhance the overall artistic beauty, because the cabinet is installed first, it is inevitable that the stain will be on the bank counter during the construction process, affecting the aesthetics. Scrape putty powder.

What are the methods to complete the engineering construction of such products.

When the preparation of interior wall putty powder must have a strict preparation, otherwise it will affect the overall actual effect, and it is recommended to carry out the deployment in accordance with the instructions for use, so that the actual effect is more excellent. At the same time, the walls are <> when they are painted with putty

It must be done three times to meet the regulations, and each time must be able to carry out the next time after drying, otherwise it is very easy to grow mildew in the middle and later use. Another is to build the project in a very cold season, pay attention to close the windows and doors tightly, otherwise the putty powder is too quick to dry and it is very easy to crack the wall. First of all, we should pay attention to the preparation of water and putty powder, only the preparation is good, the actual effect can be more in line with everyone's needs, together in the painting, you need to pay attention to the ground leveling, so that after the construction of the project, the surface can be more leveled and smooth, in addition to the putty powder generally to scrape three times, and each time to be able to carry out the next time after drying.

In the actual operation, it is necessary to pay attention to grasp the slope of the equipment, and the strength should be uniform, so as to ensure the uniformity of the construction of the project, in addition, do not keep brushing back and forth, otherwise it is very easy to peel off and fall off, endangering the construction quality of the project. A layer of putty powder is first batched on the wall to repair the unevenness of the wall, so that the cabinet is added to the leveled and smooth wall, which is relatively more beautiful and generous in terms of fit with the wall, and it is not easy to have gaps. In addition to this, putty powder is equivalent to a layer"Security protection", closed bottom layer, let water vapor.

It is not in direct contact with the cabinet board, and after moving in, it greatly reduces the situation of the cabinet being wet and cold, and mildew.

In the end, if it is a custom-made cabinet, it must be assembled until all the interior decoration is completed, so the wall still has to scrape putty, because the indoor space of the wall of the assembled cabinet is not good to carry out pre-embedding, so simply scrape putty, so the overall actual effect will be better. If you don't need to scrape putty, if you make a cabinet on the spot, because the cabinet basically occupies the whole wall,In the middle and late stages, I basically don't move, so it's possible to do it without scraping putty. But if the carpenter is sufficientTechnical SpecialtyIf so, a layer will be attached to the back of the closetTin foilto avoid moisture in the wall.

I think it's better to have some strange putty, because the environment will be very messy when the strange putty is made, and it is likely to get on the furniture, so if you make the cabinet first, you will get it on it, which will affect our overall appearance.

The putty should be scraped first before hitting the cabinet. The correct decoration sequence is to change the water and electricity first, then replace the doors and windows, then lay the bricks, scrape the putty, and hit the cabinets.

In the process of decoration, you should first scrape putty, and then make cabinets. Scraping putty is the most basic wall job. After the wall is ready, you can customize the wardrobe.

The carpenter is decorating the site, which should be done first, scraping putty or making cabinets?

In fact, this situation is still relatively common, in fact, the most ideal is to scrape the putty for the first time, and then the carpenter enters the field to make the ceiling, door frame, cabinet, etc. first, and then carry out the second putty. But generally this process is too troublesome, and it is not cost-effective to return to the scene for a decoration. A layer of putty was first applied to the wall, and the potholes on the wall were repaired, so that the cabinet was put on the flat and smooth wall, and the fit with the wall was relatively more beautiful, and there would be no gaps.

In addition, putty is equivalent to a layer"Protection"The base layer is closed, so that the water vapor is not in direct contact with the cabinet plate, which greatly reduces the occurrence of dampness and mildew in the cabinet after moving in. It sounds really reasonable, but if you ask the master to hit the cabinet on the spot, I personally think that it is better to make the cabinet first and then scrape the putty, why?

Reason 1: If according to what the owner said, scrape the putty first and then hit the cabinet, then after the wall is painted, you must wait for it to dry before you can proceed to the next step, one to delay the construction period, and the other to increase the labor cost, just ask, are you willing? Reason 2:

After the putty is approved, the cabinet is made, if you find that the cabinet frame and the wall can not be well corrigated, there are uneven gaps, not to mention the trouble of post-processing, it is difficult to repair the original wall, and you can't see the traces, because the wall has been decorated.

Generally, there are gaps between the cabinet and the wall, and there are two solutions: fill the gaps with foam glue, scrape them flat with gypsum powder, and finally polish them and brush the paint; Add the closing plate and make glass glue to put away the gaps.

Both seem very simple, but the actual operation is not simple, so it is recommended that you finish the cabinet before batch putty. Those gaps will be filled with foam glue first, and then filled with putty, so that the interface between the cabinet and the wall will be beautiful from the source. Reason 3 is that the cabinet is done first, which can block a wall, so that the wall does not need to be putty and painted, and it can also save some materials and costs.

Therefore, please ask the master to make a wardrobe on the spot, etc., is it better to scrape the cabinet and then scrape the putty, or scrape the putty first and then hit the cabinet? Now you get it! The putty does not need to be scraped, it is directly hit against the wall, which is beautiful and saves money.

In fact, everything has two sides, and some problems cannot be avoided in a good process. Therefore, as long as we know more about the common sense of decoration, we can also try to avoid some unnecessary problems. For example, when we talk about installing this kind of cabinet, we can understand it in advance, which can also increase our knowledge, and at the same time, it can also meet our needs to the greatest extent during decoration.

The carpenter is decorating the site, and the putty scraping can be completed before making the cabinet, so that the cabinet will not be affected.

Personally, I think that in the construction procedure, it is carpentry and then painter, but before making cabinets, it is best to scrape 1 or 2 putty on the wall behind the cabinet, and then make cabinets, and then repair the gap between the cabinet and the wall by painting.

Decoration is to scrape putty or make cabinets first, I personally think that in the construction procedure is carpentry and then painters, but before making cabinets, it is best to scrape 1 or 2 times of putty on the wall behind the cabinet, and then make cabinets, and then repair the gap between the cabinet and the wall by painting.

With the development of society, the house has become an important property of a family, and the decoration of the house is also important. The decoration technology used in different space types is also very different, and the difference in decoration style should be considered more seriously, and the significance of decoration culture should also be considered.

At present, there are many decoration styles, such as modern minimalist style, tranquil pastoral style, new Chinese style, European classical style, etc. <>

The decoration steps are also stipulated, such as carpentry, mason and painter are the "three brothers" of the construction link, and the basic order of appearance is: carpenter, mason, painter, and the principle of appearance is who is dirty and who goes first. This is also the normal order of interior decoration.

Because after scraping the putty first, after installing the wardrobe, the scraped putty cannot be seen, and it also adds a certain amount of work to the workers, so it is not necessary, and it is necessary to install the cabinet first, and then scrape the putty.

However, when installing the cabinet, you need to put a layer of tin foil on the back of the wardrobe, so as to ensure that the wardrobe will not be damaged by the damp wall. If you don't plan to customize your wardrobe, but plan to buy a finished wardrobe, you need to scrape putty comprehensively, which is good for aesthetics and prevents the wardrobe from being soiled when scraping putty.

When scraping putty, you need to choose water-resistant putty, and it should not be too thick when scraping, otherwise it will crack during the drying process, so it needs to be applied in small quantities many times. A lot of dust will be generated when grinding putty, and construction personnel need to wear masks and do a good job of protection. <>

When loading the cabinet, it is necessary to install it according to customer needs, and at the same time ensure that the beam position, top line, and closing plate corner opening should be carefully checked, cut accurately, and protect the product assembly, planing the uneven goblin planer, self-inspection after installation, and then hand over the task, and finally tidy up the hygiene, and give the customer a clean environment. <>

Ensure that the installation sequence is correct, which has a great impact on the construction process, and the wrong order sometimes wastes time and cannot be remedied, affecting the final decoration effect.

Of course, it is to scrape the putty first. When scraping putty, the wall can be leveled, which will make our wall more vertical, so that there will be no gaps when installing the wardrobe in the later stage.

I think it's okay to do both, you can also scrape putty first, and then install the cabinet, because if you renovate it later, the place of the cabinet is also good, and it doesn't look strange.

I think it is necessary to scrape the putty first, so that all parts of the house will be scraped, and the whole house will be very white, and there will be no places that have not been scraped.

Be sure to scrape the putty first, so that the structure of the house is relatively complete, and then the wardrobe will not make the cabinet dirty.

Putty should be scraped first, mainly because these walls need to be treated first, so that you can choose to install some furniture, otherwise it is very likely that these furniture will be contaminated.

Of course, it is to scrape the putty first and then install the wardrobe, and there is a certain order in this aspect of decoration, and you must not come according to your own ideas.

It should be scraped putty first, and then the wardrobe should be installed, so that it is more convenient to decorate and there will be no unnecessary trouble.