How would you choose between scraping putty or installing the wardrobe first?

In response to the question of "scraping putty first or installing the wardrobe first, how would you choose?" "This question, in my personal opinion, should be based on the actual situation:

First of all, if the house is still a rough house, then you have to scrape the putty first, and then install the wardrobe, think about it, if the house is a rough house, then the walls are rough, so that the sand will fall, so that if the wardrobe is installed, it is more troublesome to clean the room in the future, and some sand will often fall in the room, which is not conducive to the cleaning of the room, if you scrape the putty, the wall will be much smoother, and these situations will not occur, so if it is the case of the blank house, you must first scrape the putty and then install the wardrobe, This makes it much easier to clean up in the future.

Secondly, if the house is a semi-finished house, that is, the decoration is halfway, if the wall has been treated, not rough, you can directly install the wardrobe, and then scrape the putty after installing the wardrobe, so that the wardrobe can be well connected with the wall, and there will be no more flash gaps, so that the back of the wardrobe will not enter the dust, nor will there be spider webs, nor insects, otherwise the wardrobe and the wall can not be well joined together, flashing a large gap, there will be dust, and it will become a place for mosquitoes to hide, for a long time, It will be full of dust, and it is not easy to clean, and it will also hide a lot of small insects, so the best way is to install the wardrobe first, and then scrape the putty, so that the gap between the wardrobe and the wall can be sealed, and there will be no dust and no small insects.

Third, if the wall is too wet, it should be cooled and dried, and then the wardrobe should be installed, you must know that the wardrobe is wood, if it touches the wet wall, it will be deformed, so it is necessary to cool and dry it before installing the wardrobe, so that you can avoid the phenomenon of wardrobe deformation, if the conditions permit, you can do waterproofing on the wall that is ready to install the wardrobe before installing it, so that the wall will not get wet, otherwise it will reduce the service life of the wardrobe.

These two processes belong to two different types of work, one is wall decoration and the other is furniture building, and the order should have no influence on each other? However, both types of work are on-site construction, and it is certainly inconvenient to carry out them at the same time, so it is divided into a sequence! Is the decoration to scrape putty first or make cabinets first?

Many people have been very entangled in this issue, after all, laymen do not understand the decoration procedure, and it is normal to not know whether to scrape putty first or make cabinets first. Usually, putty should be scraped first. Generally, after pasting the bricks, the carpentry began to carpentry, the task of carpentry is to suspend the ceiling, hit the cabinet, because the cabinet is made of carpentry, some details are not easy to deal with, such as the wall is uneven, or the wall is tilted, and the carpenter can not do the oblique when making the cabinet.

The general practice is that the water goes to the top and the electricity goes to the ground. There are also hydropower that go to the top or go to the ground. After the water pipe is ready, not only the pressure test should be carried out, but also the water discharge test should be carried out.

The wire requires that all dark wires must be threaded through the conduit, and each wire head can be twitched. Painters cause a lot of inconvenience, must do a good job of finished product protection, all cabinets with protective film to protect up, although whether the first cabinet or putty will be the finished product protection of the cabinet, but the first cabinet to be installed, it will definitely increase the difficulty of finished product protection. The wardrobe is mostly made of solid wood boards, solid wood boards are most afraid of moisture, scrape 1 or 2 times putty behind the cabinet, preferably water-resistant putty, which can play a part of the moisture-proof role, and has some blocking effect on the dampness in the wall to penetrate outward.

Avoid gaps between the cabinet and the top surface of the wall, which will affect the appearance. Usually carpenters do a good job of the cabinet, horizontal and vertical, when the oiler is leveling the top surface of the wall, he will fill the gap between the cabinet and the top surface of the wall with plaster, and at the same time level the top surface of the wall to ensure that the cabinet and the wall are tightly fitted.

In this way, you can do a ground self-leveling, otherwise it is not necessary to find a vertical angle, and it is also a waste of money, and the effect will not be obvious. Of course, the main function of self-leveling is to make the indoor ground level better, which can make the effect of laying the floor better in the future.

Personally, I think it is necessary to scrape the putty first, because in the process of scraping the putty, it will inevitably exceed some ranges, if you install the wardrobe first, and then scrape the putty, it will stain the wardrobe, and it is difficult to clean off, and some of the traces left by the putty will be scraped.

I chose to scrape putty first and install the wardrobe. In this case, even if I think this wardrobe is not good-looking, it will be easy for me to change it at that time, but if I install the wardrobe first and then scrape putty, I think it will be difficult.

I will choose to install the wardrobe first and then scrape the putty, so that the damage is relatively small. There will be no secondary damage, and the integrity of the house will be relatively high.

Of course, I install the wardrobe first, and then scrape the putty, after all, it takes time for the putty to dry on the wall.

Generally, carpentry is done first, and then the wall is made, if the wall is done first, the carpentry is done and the wall is broken.

I think the two types of work can be cross-worked, you can first scrape 1 or 2 times of putty, and then carry out the on-site production of the cabinet, and then complete the last putty construction after the cabinet is done! This operation can well deal with the gap between the cabinet against the wall (except for movable cabinets or customized cabinets), and achieve the dense effect of mixing the cabinet and the wall.

If the wall surface is in good condition, the on-site carpentry cabinet is made on the floor tiles.

Once you're done, you can make the installation. The same is true for factory-customized wardrobes, which can be scraped without waiting for putty.

You can install it. The disadvantage is that after the wardrobe is installed, the painter will cause a lot of inconvenience to the painter again, and the finished product must be protected, and all the cabinets will be protected with a protective film. According to the normal procedure, the ground decoration (bricklayer paving) is completed to the carpenter, the ceiling decoration and the cabinet building are completed at this time, and then the painter enters the site to complete the putty scraping or some other materials of the wall decoration.

The general practice is that the water goes to the top and the electricity goes to the ground. There are also hydropower that go to the top or go to the ground. After the water pipe is ready, not only the pressure test should be carried out, but also the water discharge test should be carried out.

The wire requires that all dark wires must be threaded through the conduit, and each wire head can be twitched. Of course, if the floor decoration is made of wooden flooring, it can also be arranged after the cabinet is built, so that the occupied position of the cabinet does not need to be decorated, which has the advantage of reducing the cost of floor decoration!

When the new house is renovated, the construction is carried out in accordance with the order of the process, first of all, the indoor water and electricity are changed, the water and electricity installed by the developer are only the approximate location, the water and electricity are reinstalled according to the height specified by the owner, the water and electricity are changed, and the bathroom is waterproof paint three times.

Confirm that the waterproof paint is dry thoroughly, and then paste the wall tiles and floor tiles, wall tiles, and floor tiles after pasting.

The new house should be fitted with cabinets first, and then putty, because when installing cabinets, holes will be punched in the wall, and the wall will be scratched.

Load the cabinet first. Because if you scrape putty first, the wall will be damaged if you install the cabinet, so you should install the cabinet first.

Of course, you should scrape the putty first, because if you install the cabinet first and then scrape the putty, the cabinet may be dirty.

After the walls and everything are done; Finally, the cabinet is loaded; Now they are all custom-made cabinets, and there is no need for large-scale cutting on the cabinet. The custom designer will take all of them into account before measuring, and finally make the cabinet will not appear any uneven place with the wall, and all the customized solutions; The first thing to install the cabinet is nothing more than to save those few floor tiles and wall paint; I very much agree with the cabinet first, because it can be adjusted later; Customized cabinets need to wait for the wall to be ready;

When carrying out interior decoration, it is usually necessary to scrape putty first and then make cabinets. This is because scraping putty is the basic project of interior decoration, and its main role is to make the wall smooth and smooth, providing a good foundation for the subsequent laying of decorative materials. The fabrication and installation of furniture such as cabinets is carried out after the walls have been treated.

If you want to know the specific decoration**, you can use the "decoration artifact" ** device to calculate, just enter the area + city, immediately calculate the local decoration**, list the detailed list of 102 decorations, so that you don't have to worry about overspending on the decoration, click here to start calculating: [3 seconds to get the local decoration**].

The ** of scraping putty will be affected by a variety of factors, including the brand of putty, quality, construction difficulty, etc. Generally speaking, the ** of scraping putty on the market is about 10-30 yuan per square meter. The ** of the cabinet mainly depends on the material, size, design and other factors of the cabinet.

Generally speaking, the ** of the cabinet in the market is about 300-1000 yuan per square meter.

When carrying out the renovation, it is recommended that the owner first make a good budget, and then choose the right decoration materials and design according to the budget. At the same time, it is also necessary to pay attention to choosing an experienced and reputable decoration company for construction to ensure the quality of decoration. During the construction process, the owner should also regularly inspect the project to ensure that the progress and quality of the project meet expectations.

Tuba Rabbit is one of the largest decoration platforms in China, with a total of more than 41 million owners, 110,000 decoration companies, covering more than 300 cities across the country, user reputation is very good, not only to meet your decoration needs, but also to provide professional decoration companies according to your budget, want to find a good company, learn more about decoration knowledge on Tuba Rabbit, click here, free 1 to 1 for your home decoration services: [Tuba Rabbit ** official website].

Kunming - [Kunming Decoration Strategy Guide].

Suzhou - [Suzhou Decoration Strategy Guide].

Hefei - [Hefei Decoration Strategy Guide].

Fuzhou - [Fuzhou Decoration Strategy Guide].

Beijing - [Beijing Decoration Strategy Guide].

Dalian - [Dalian Decoration Strategy Book].

Hangzhou - [Hangzhou Decoration Strategy Guide].

Shanghai - [Shanghai Decoration Strategy Guide].

Tianjin——[Tianjin Decoration Strategy Guide].

Generally, the putty is scraped once or twice, and then the cabinet is hit, and the putty is scraped once or twice after the cabinet is finished. After the putty is scraped, apply latex paint or wall covering. Decoration is such a process, if the wall is to be walled, the wall can not be scraped.

Do carpentry first. Because carpentry will produce a lot of this wood stubble and wood chips during construction. After doing the wall putty and doing carpentry, it will be very troublesome and troublesome to clean.

When doing interior decoration, the correct order should be to scrape putty first and then make cabinets. First of all, scraping putty is the basic project of interior decoration, and its main role is to make the wall smooth and provide a good foundation for the subsequent wall decoration. If you make the cabinet first, it may affect the working effect of scraping putty, and may even cause the cabinet to be contaminated with putty.

If you want to know the specific decoration**, you can use the "decoration artifact" ** device to calculate, just enter the area + city, immediately calculate the local decoration**, list the detailed list of 102 decorations, so that you don't have to worry about overspending on the decoration, click here to start calculating: [3 seconds to get the local decoration**].

In the Chinese market, the first putty scraper is roughly between 30-50 yuan square meters, while the cabinet is different according to the material, design and production process, generally between 1000-3000 yuan square meters. These ** are for reference only, and the specific ** needs to be determined according to the actual situation and the ** of the decoration company.

When carrying out interior decoration, it is recommended that the owner should have a detailed understanding of the decoration process and ** when choosing a decoration company, so as to avoid poor decoration results or exceeding the budget due to lack of understanding of the decoration process. At the same time, it is also necessary to pay attention to protecting the completed decoration project to avoid damaging the completed part when carrying out subsequent decoration. In addition, scraping putty and making cabinets are both jobs that require a certain amount of skill, so it is also very important to choose experienced and skilled workers to carry out these tasks.

Tuba Rabbit is one of the largest decoration platforms in China, with a total of more than 41 million owners, 110,000 decoration companies, covering more than 300 cities across the country, user reputation is very good, not only to meet your decoration needs, but also to provide professional decoration companies according to your budget, want to find a good company, learn more about decoration knowledge on Tuba Rabbit, click here, free 1 to 1 for your home decoration services: [Tuba Rabbit ** official website].

Kunming - [Kunming Decoration Strategy Guide].

Suzhou - [Suzhou Decoration Strategy Guide].

Hefei - [Hefei Decoration Strategy Guide].

Fuzhou - [Fuzhou Decoration Strategy Guide].

Beijing - [Beijing Decoration Strategy Guide].

Dalian - [Dalian Decoration Strategy Book].

Hangzhou - [Hangzhou Decoration Strategy Guide].

Shanghai - [Shanghai Decoration Strategy Guide].

Tianjin——[Tianjin Decoration Strategy Guide].

FirstScrape puttyOr hit the cabinet first If the cabinet is made on the spot, you can install the cabinet first and then scrape the putty, although the back of the cabinet is likely to be scraped, but the impact is not great。If the cabinet is custom-made, you can scrape the putty first and then install the cabinet, which can enhance the overall artistic beauty, because the cabinet is installed first, it is inevitable that the stain will be on the bank counter during the construction process, affecting the aesthetics. Scrape putty powder.

What are the methods to complete the engineering construction of such products.

When the preparation of interior wall putty powder must have a strict preparation, otherwise it will affect the overall actual effect, and it is recommended to carry out the deployment in accordance with the instructions for use, so that the actual effect is more excellent. At the same time, the walls are <> when they are painted with putty

It must be done three times to meet the regulations, and each time must be able to carry out the next time after drying, otherwise it is very easy to grow mildew in the middle and later use. Another is to build the project in a very cold season, pay attention to close the windows and doors tightly, otherwise the putty powder is too quick to dry and it is very easy to crack the wall. First of all, we should pay attention to the preparation of water and putty powder, only the preparation is good, the actual effect can be more in line with everyone's needs, together in the painting, you need to pay attention to the ground leveling, so that after the construction of the project, the surface can be more leveled and smooth, in addition to the putty powder generally to scrape three times, and each time to be able to carry out the next time after drying.

In the actual operation, it is necessary to pay attention to grasp the slope of the equipment, and the strength should be uniform, so as to ensure the uniformity of the construction of the project, in addition, do not keep brushing back and forth, otherwise it is very easy to peel off and fall off, endangering the construction quality of the project. A layer of putty powder is first batched on the wall to repair the unevenness of the wall, so that the cabinet is added to the leveled and smooth wall, which is relatively more beautiful and generous in terms of fit with the wall, and it is not easy to have gaps. In addition to this, putty powder is equivalent to a layer"Security protection", closed bottom layer, let water vapor.

It is not in direct contact with the cabinet board, and after moving in, it greatly reduces the situation of the cabinet being wet and cold, and mildew.

In the end, if it is a custom-made cabinet, it must be assembled until all the interior decoration is completed, so the wall still has to scrape putty, because the indoor space of the wall of the assembled cabinet is not good to carry out pre-embedding, so simply scrape putty, so the overall actual effect will be better. If you don't need to scrape putty, if you make a cabinet on the spot, because the cabinet basically occupies the whole wall,In the middle and late stages, I basically don't move, so it's possible to do it without scraping putty. But if the carpenter is sufficientTechnical SpecialtyIf so, a layer will be attached to the back of the closetTin foilto avoid moisture in the wall.