What kind of blank is the rough house, is it not even able to use the toilet, or there are no window

1. What is a rough house?

The so-called rough house is also known as the initial decoration house, most of such houses only have door frames, no doors, and the walls and floors are only done with foundation treatment without surface treatment.

2. What is the main acceptance of the rough house?

1. Waterproofing.

Waterproofing mainly refers to the waterproofing of kitchens and bathrooms. Of course, the current delivery of the house, basically will do waterproofing, if you don't try before the renovation, then when you renovate and find a leak or something, then the maintenance project will be big. The renovated floor had to be removed to make a new layer of waterproofing.

2. Check doors and windows.

The inspection of doors and windows mainly checks whether the doors and windows are smooth, whether the surface is smooth and clean, and whether there are serious scratches; Hardware accessories: complete, correct position, firm; Regarding the sealing quality, when the doors and windows are closed, check the sash and frame, there is no obvious gap between the sash and the sash, and the sealing strip is not loose, does not fall off, and is not exposed; Whether the window drain hole is opened, and the water will flow into the profile if it is not opened.

3. Inspect the wall.

In addition, it is necessary to check whether the wall is cracked, whether there is a hollow drum, knock on the wall with a small wooden hammer or other things, and the sound made when the hollow drum is knocked is not real, it is easy to hear, and it needs to be rectified to make a mark.

4. Check the gas pipeline.

You must know that the gas meter is a very space-consuming thing, and how to adjust the position of this meter must also listen to the opinions of professionals, and it must be transformed by the gas company, which is very important.

5. Check the circuit.

Circuit checks are also important. Buyers should check whether the sockets and switches are set up reasonably, and whether the circuit needs to be transformed in the decoration, one is to see the needs of individuals, and the other is to see whether the sockets and switches in the house are reasonable and easy to use; Check whether each light switch and power socket can be used normally, bring a mobile phone holder to charge, or plug in a pen to verify whether the power socket is on, of course, professionals will use a special socket to check.

2. What should I pay attention to when accepting the rough house?

1. Check the developer's certificate.

When the buyer accepts the rough house, he must ask the developer for "three books, one certificate and one form", that is, "Construction Engineering Quality Certificate", "Residential Quality Assurance Certificate", "Residential Instruction Manual", "Real Estate Development and Construction Project Completion Comprehensive Acceptance Certificate" and "Completion Acceptance Record Form". These three books, one certificate and one form are the necessary materials when receiving the house, if the developer cannot provide these materials and documents, the owner can refuse to take over the house.

2. Measure whether the area of the house is correct.

The size of the house is related to the total amount of the house payment, which has a direct impact on the economic interests of the buyer. Therefore, the verification of the area of the purchased house is also an important part of the housing acceptance work, the buyer can ask the developer to issue the "measured area surveying and mapping report" when accepting the rough house, if the measured area error exceeds 3, you can suspend the house.

Rough houses are also known as "initial decoration houses", most of such houses only have door frames and no doors, and the walls and floors are only done with foundation treatment without surface treatment. All exterior finishes of the house, including balconies and rain covers, should be completed according to the design documents. Generally speaking, it is the interior of the house, there are no floor tiles, floors or anything, just concrete floors, the walls are only finished plastering without scraping putty, brushing paint, or simple scraping putty, the bathroom generally only does the waterproof layer, protective layer, no other furniture, sanitary ware or anything, the windows will be installed, and the door generally only provides ordinary anti-theft doors, which can be replaced as needed.

Professional, rough room, with entrance security doors, windows, water and electricity, and lighting.

The walls are not powdered, the roof is not hanging, the floor is not paved, and the toilet is not installed!

We know that houses are getting more and more expensive now, and it is not easy for anyone to buy a house, so after the house is in hand, we must check it well, and check out as soon as we find that there is a problem, so as to avoid some unnecessary problems. So, are there doors and windows in the rough house during acceptance? Next, let's find out!

The rough house is with window glass and balcony railings, the concept of the rough house is a house that has not been renovated, without window glass and balcony railings do not meet the relevant national acceptance regulations can not be delivered, all exterior finishes outside the house, including the exterior finishes of the balcony and rain cover should be completed according to the design documents.

How to inspect the rough house.

1. Measure the actual area of the room bridge or family.

According to Qeeka Home experts, buyers can measure on the spot according to the construction area and drawings provided in the house handover book, and if the error is large, they can ask the developer or entrust a professional agency to retest. You can also ask the decoration company to send someone to measure the size directly, saving you the trouble in the future.

2. Check the height of the floor.

If you have signed a contract that has this clause, you should measure the floor height of the house. The general way is to measure the shade of two of the walls, and if the house is less than 2600mm, you will have to live in a depressing environment in the future.

3. Door and window inspection.

If the structure of the doors and windows is not good, and the sealing is poor, this will not only cause water leakage and water ingress, but also whether the buyer can check whether it can be locked and whether it is flexible to open; It is also necessary to use a professional measuring instrument to determine whether the door is correct by checking the diagonal value of the door frame; Whether the frame groove of the moving door is in good condition, etc.

Conclusion: The above content is about whether there are doors and windows in the rough house? I hope it can help you. I believe that after the introduction of the content, how will you inspect the rough house? If you have more understanding, if you have a need in the future, you can refer to the content.

Rough room toilet no window? In fact, this kind of thing is very common, but for the toilet without a window is a very annoying thing, so how to deal with this kind of thing? Below, let's understand and learn with the Qi family!

1. Method 1 is to create a window to come out, which will solve the problem from a more fundamental point of view, and there will be no worries. However, this must consider the load-bearing structure of the house, and the difficulty is relatively large, so not every apartment type can do this.

Secondly, change the layout, such as changing the bathroom into a cloakroom, storage room, etc., and then find another location with a window to create a new bathroom layout.

2. The second is to manufacture light sources, generally speaking, the light source of the bathroom shall not be less than three, namely the shower area, the toilet area, and the washing area, and these three main intervals are the main intervals of human activities. If the three sections are placed side by side, two lights can also be installed: one light source for the vanity mirror, and one light source for the toilet and shower area.

2. The choice of light color in the bathroom, generally speaking, the light transmittance of the bathroom without windows is not very good, and the requirements for lighting are relatively high, in fact, the most important thing is the color light of the lamp source, and the bathroom without windows should naturally choose a cold color light source, and the cold light lamp is the most suitable dark area, which can enhance the contrast and the line of sight is relatively bright.

As for the matching of white, first of all, the tiles can be white, and it is recommended to have stripes, so as to expand the reflection area. Secondly, the daily necessities in the bathroom can be white, such as dressing counters, towels, etc., and the overall effect is relatively refreshing.

4. The bathroom cannot be naturally ventilated without windows, and the moisture and odor in the bathroom will be heavier for a long time, so it is necessary to install an exhaust fan in the bathroom to make the air convection, so that it can keep it dry and ventilated. You can also choose a bath bomb with ventilation equipment when installing it, so that you don't need to install an additional exhaust fan and save space.

5. When the toilet is flushed after use, the water flow will flush the bacterial odor into the air, increase the chance of bacterial infection of other utensils, and also increase the indoor moisture and odor.

6. In addition to ventilation, moisture and moisture are to do a good job of dry and wet separation, and doing a good job of dry and wet separation can greatly reduce this situation, or even avoid it.