Plastic chairs are stacked on top of each other, how can they be separated?

Method 1: Step on the edge of the foot of the chair inside, and then pull the outside one upwards with your foot.

Method 2: Two people, pull to both sides, one person pulls a chair.

Method 3: Plastic chairs can be placed in the sun to dry. Use method 1 or method 2 after sunbathing.

In fact, plastic is not like iron, it is relatively strong, and plastic itself is malleable.

and toughness, so after we sit on the plastic chair, most of the weight of the whole body will be on the chair, so the ductility of the plastic will be reflected in this qualified time, because of the force, there will be ductility in all directions, and the chair has this hole on it, which will accommodate some stretch, and it will not only be easy for the chair to break when you sit down.

In fact, just like the floor we lay, there is a certain distance between the floor and the wall, because this distance is to shorten the space for the floor due to heat elongation and colding, and there are also some gaps in the tracks of the train, and these gaps are also the remaining space for the rails to be heated and cold.

The holes in the chair are the same, except that the floor and rails are deformed because of temperature, and the chair is deformed due to force, but they all have to leave some space for them, so this hole can help the chair prolong its life.

It should be stacked tightly, right?

Method 1: Step on the edge of the foot of the chair inside, and then pull the outside one upwards with your foot.

Method 2: Two people, pull to both sides, one person pulls a chair.

Method 3: Plastic chairs can be placed in the sun to dry. Use method 1 or method 2 after sunbathing.

Blanch it with hot water and separate.

Turn the chair upside down, then grab a chair with both hands, keep shaking your hands, and shake the two chairs apart through high-frequency continuous vibration, so that the chairs will automatically separate under the influence of gravity.

I got it. Take hot water to bubble first. Then I'll pull it for you. Haha me. If you don't come, you won't pull.

Hello, I am happy to serve you and give you the following answers: If the hind legs of the plastic chair are loose or fall off, you can take the following steps to repair them:1

Check whether the connection between the chair leg and the base is damaged or the grinding beam is seriously damaged, if it is damaged, the connector needs to be replaced. 2.Find a suitable tool, such as a screwdriver or wrench, to remove the screws at the joint.

3.Wash the connectors and detached legs, and clean the base connections and screws. 4.

Depending on the shape of the legs and connectors, use glue or other fixing tools to fix them. If you are using snail rubber screws for fixing, pay attention to using screws of appropriate length, not too long or too short. 5.

After fixing, wait for the glue to be fixed or the screws to be tightened. It should be noted that before carrying out repairs, it is necessary to make sure that the chair has been dried to avoid the soft plastic affecting the fixing effect. At the same time, when it comes to detailed operations such as replacing connectors and screws, it is necessary to operate with caution to avoid more serious problems.

Chairs with white latex can be joined together. White latex is special for furniture, white latex can be cured at room temperature, cured quickly, the bonding strength is high, the adhesive layer has good toughness and durability and is not easy to age.

White latex is one of the most widely used adhesive varieties at present. It is obtained by emulsion polymerization with water as the dispersion medium, and is a water-based environmentally friendly glue.

Maintenance of chairs

For the newly purchased leather chair, first soak the towel with water, wring it out and wipe off the dust and dirt on the surface of the chair, and then gently wipe the leather surface with a conditioner once or twice without using waxy care products, so as to form a protective film on the surface of the leather, so that the dirt in the future is not easy to penetrate into the pores of the dermis, which is convenient for future cleaning.

Avoid stains such as oil stains, ballpoint pens, inks, etc., staining the leather chair. If you find that there are stains on the leather of the chair, you should clean it immediately with a leather cleaner, if there is no leather cleaner, you can use a clean white towel dipped in a little alcohol to wipe the stain, and then dry it with a dry wet towel, and finally care with a protective agent.