How to make a homemade coil hook? How to use the coil hook

The first is to prepare the materials, the following picture shows the materials used in the production of five-star coil hooks, which are: 2 strong horse mouth wire, 8 Marushi fish hooks, stainless steel tray base, PVC hard conduit, nest bait cage, tire line.

Connect the stainless steel tray seat with the wire and the hook according to the style of the traditional disc hook, and pay attention to the strong horse thread through the conduit before tying the hook. The inner diameter of the selected catheter must match the wire diameter, if the catheter can slide freely, then the function of not entanglement will be lost.

Finally, put on the tire line, connect the bait cage, and a killer weapon is baked. The most creative thing is the bait cage, which is loaded with sake rice to attract fish, so it has become an excellent match for fixed-point nesting and fixed-point fishing.

<>Of course, for the plain geological waters need to throw friends is also very simple, add a traditional hook of the special plumb sinker to solve, increase the weight of the thrown object will also increase the inertia, in other words, directly increase the throwing distance.

Main advantages: First, this thing is generally cast with sea rods and rock rods, and it is easy to fish target fish in deep water at a distance. Of course, this advantage is targeted, its birthplace Hunan is originally the impact of the flat prototype reservoir is the majority, and the water depth is only 2-3 meters tens of meters offshore, so it is very suitable for the water situation there.

This is also the reason why the use of long rod fishing or sea rods, rock rods, and long-throw rods is more popular in the two lakes area. Our Sichuan is different, mountainous reservoirs are the majority, and the shore is several meters deep, so the hand rod is widely used.

However, long-distance fishing is still necessary during this special time of winter, when the fish are often hiding in deep waters far from the shore.

Second, the hook is dense and easy to be found by fish. This is also the most lethal part of the coil hook.

The coil hook is a good combination of sea fishing, light fishing and bottom fishing.

Fabrication of coil hooks.

1. Choose a 3 4cm plastic bottle cap, divide it into quarters and drill 3 small holes and one large hole on the side of the cap.

Drill two equal small holes at the bottom of the cover.

2. Tie an 8 10 cm gong mother or a flat-bottomed 25 40 gram lead sinker that can be fixed on the outside of the bottom of the bottle cap.

3. Use a nylon thread to penetrate the big hole of the bottle cap and then wear out the small hole to fix a fishing rubber ring, connect and fix three in a row, and then tie the knot from the big hole, leave a length of 10cm and then tie a connecting ring buckle.

Fourth, tie about 10cm strands and hooks on each of the 3 rubber bands, and the strands should not be too long to avoid lines and lines.

Wrap between lines. In this way, the coil hook is done, and when used, the coil hook connecting ring is connected to the main line of the sea casting rod, and the trap is loaded with bait and cast.

Original article** Netizen who did not want to be named.

Just pretend to be dropped according to **.

The most practical homemade skewers to make are as follows:

1. First of all, making a hook requires us to prepare sufficient basic props, a sufficient number of hooks and fishing lines, which are the basis for making hooks.

2. After that, connect the hook with the fishing line and fix a hook, so that a basic hook is completed, so that we have completed one of the parts.

3. Next, we connect our hooks and fishing lines to form multiple hooks, so that all the small parts of the hook can be completed, and then we can clean them up and assemble them.

4. Generally speaking, the hook has unique assembly parts, which can be assembled directly, so that we can easily assemble multiple hooks into a hook answer.

5. If we don't have professional assembly props, we can also use fishing lines to tie them together, which can also form a string hook, but it is not stable enough and is inconvenient to disassemble.

6. Assemble all the fishing hooks together, you can form a string hook, so that the production of the string hook is completed, and it can be connected with the fishing line of the fishing rod below.

7. Due to the large number of hooks, the number of hooks can increase the probability of success of fishing, and destroying multiple hooks can also improve the stability of fishing and avoid fish unhooking.

The correct way to use the coil hook is as follows:

1. The hook is more suitable for bait, hanging earthworms, and wheat seeds, directly put the bait on the hook, and press it into a cake shape for fishing, because the hook has many cavity entrance hooks, and it is not easy to get rid of the fish when fishing, and it does not hurt the fish, and it is more convenient to pick up the hook, and it is not easy to hang the aquatic plants and other debris under the bottom when fishing.

2. Compared with other fish hooks, there are more hooks hanging in the fish's mouth when the hook is used, and there will be no unhooking phenomenon, and the distance between the hooks is relatively small.

3. When fishing, the coil hook will generally only hang a few small holes outside the mouth, and the damage to the fish is relatively small, because the coil hook is relatively large, and it will not be completely swallowed by the fish into the stomach when it is used, and there will only be a small part of the hook.

4. The mouth line of the coil hook is relatively short, each hook is connected to the swivel ring, and the range involved in the hook is very small after entering the water, so compared with other combined hooks, it is not easy to hang aquatic plants and sundries.

Coiled hook tying method:

1. Inner and outer line loop knots: one of the spacing of the double hooks is clear and folds up the strand, and then the strand is worn out of the inner hole after the generated outsider wraps around 2 or 3 times, and finally gently pulls both sides of the strand to make the strand firmly make a knot.

2. Take the inner line loop: one of the spacing of the double hook is clear and fold up the strand, and then the strand is threaded out of the inner hole after 2 or 3 turns in the circle of the spring loss, and finally gently pulls both sides of the strand to make the strand firmly make a knot.