How to tie a fishing skewer hook, how to tie a fishing skewer hook

String hooks, also known as grape hooks and centipede hooks. It ties the hook into a string, hence the name.

1) How to tie the string hook: The string hook is generally tied to the main line with 3 or 5 fishing hooks, and is mostly used for sea rod throwing. Because each hook is separated by a certain distance, it is in different levels of the water body after falling into the water, and fish in different water layers can be fished, which improves the hook rate.

After the hook enters the water, it is required that each hook can be stretched and not entangled with the main line, so the brain wire should be slightly stiffer, that is, the nylon wire with a thicker wire diameter is used. The brain line of the hook should not be too long, generally 5 8 cm is appropriate, the diameter of the line is millimeters, and the distance between the hook and the hook should be greater than the length of the two brain wires, so as not to entangle each other.

2) The use of string hooks: the hook is generally used to die, the pendant is consolidated at the end of the main line, and the dead fall is 10 15 cm away from the first one, requiring the first hook to be able to hit the bottom just after entering the water, and can not be buried in the silt. If the bottom hook has not been bitten by the fish, it means that the bottom hook has been buried in the mud, and the countermeasures should be changed in time, and the pendant can generally be moved down.

When fishing with a string hook, the elevation angle of the rod does not need to be too large, and try to keep the line close to the surface of the water, so that the hook on the main line is close to the bottom of the water, and the fishing effect will be better. When catching a big fish with a string hook, due to the large number of hooks and hooks and the long extension distance, it is necessary to pay attention not to make the idle hook hang up and catch the net, so that it is difficult to catch the fish.

Because there are many hooks and a long distance between the top and bottom, special attention should be paid when throwing to avoid the hook hooking the body. When throwing out, the positive throwing method is generally used, and it is advisable to throw it out from the top of the head. This makes it easy to throw out, easy to cast accurately at the intended fishing spot, and less prone to accidents.

A fishing hook is a combination hook with multiple hooks that can increase fishing efficiency when fishing. Here's a simple way to tie a fishing string:

Start by choosing the right hook and line, deciding how many hooks to use on the hook and how far each hook will be between them.

Tie the string hook line to the fishing line. Usually a Balham knot is used, where the hook line and line are threaded through the hook eye and the ring on the hook, respectively, and then the hook line and line are looped around the other side line 3-4 times, through the previous loop, and then they are tightened. This will allow you to hold the hook line and fishing line together.

Thread the hook through the loop of the string hook line. Thread the tip of the hook through the ring from above and back from below, so that the tip of the hook points in the opposite direction of the line.

Make sure the hook is in the correct position on the string hook line. Depending on the need, the position of the hook and the distance between the hooks can be adjusted to better attract the fish.

Repeat the above steps until all the hooks are installed.

Before fishing, check that the hook and line are secure and fine-tune as needed.

It should be noted that the fishing hook should comply with local fishing regulations when using it to avoid illegal operations and overfishing.

The fishing hook is tied as follows:

First, the hook fishing method and the ordinary double hook fishing method can not be the same day, the double hook at most to a "double fly", and the hook can be the same as the fish up to as much, tempting is not? Want to learn? In fact, if you want to learn to hook a string, the first thing we need to master is how to tie it and how big a thread to use.

Next, let's focus on teaching you these knowledge.

Second, the selection of string hook line. The thickness of the hook line should be determined by the target fish you are caught, and the crucian carp should be used no more than about the size of the line, too thick will make the fish vigilant, too thin and easy to be torn off after the fish is pinned. Generally speaking, it is more appropriate to use the main line of No. 2 and the sub-line of No. 1.

Third, the general binding method of the hook nuclear trace. First of all, a No. 1 nylon monofilament, 1 meter or meter can be cut, cut off by 20 cm, can be cut into 5 or 6 segments, these are the strands of the hook. When tying, pinch the hook strip with the left hand, put one end of the strand through the hook bend about 1 cm, so that the hook tip is up and the hook handle is to the right, and the other end of the strand is parallel to the hook bar to form a circle.

Fourth, then the left hand pinched the hook and the parallel strand, the right hand grasp the middle part of the right side of the circle, in a clockwise direction around the hook and the parallel strand winding, wrap 6-8 circles, the left and right threads tightened.

Fifth, after that, tie a few more with the same method. Then take the main line of root No. 2, the loss base is almost 100 cm according to the water depth, and the tied sub-line is tied to the main line at a distance of 10-15 cm.

When tying the hook <>, first take a piece of thread and fold it in half to tie a knot, then measure a piece of thread with the same length as the previous thread, and then tie a knot. After that, the two threads are overlapped and the loop is started, the lower thread is passed through the middle loop, the knot is also threaded, and then the rope is tightened. Tie the other side in the same way, cut the bottom line and tie it to the hook.

The string hook is a kind of fish hook binding method, also known as grape hook and centipede hook. It ties the hook into a string, hence the name. String hooks are generally tied to the main line with 3 or 5 fishing hooks, and are mostly used for sea rod throwing.

The hooks of the string hook are separated by a certain distance, so they are in different levels of the water body after falling into the water, and fish in different water layers can be fished, which improves the hook rate. After the hook enters the water, it is required that each hook can be stretched and not entangled with the main line, so the brain line of the hook should be slightly harder, that is, the nylon thread with a thicker diameter is used. The brain line of the string hook should not be too long, generally 5 8 cm is appropriate, the diameter of the wire is millimeters, and the distance between the hook and the hook should be greater than the length of the two brain wires, so as not to entangle each other.

Tie 3 hooks to deal with the technical defects of river fishing, if the river fishing is half of the water or lead is easy to go out of the water, and the catch is a small meal, heavy lead, large bait is easy to fall into the thick silt layer, the fish can not eat food.

Prepare 3 hooks for each variety of materials, nylon road tie (hook tied with filial piety cover line), eight-braided PE main line, herringbone thread, paper clip, tweezers, open and tied.

Tie 9 hooks first. The length of the cut is about 25 cm, which is too short to tie the knot.

The herringbone here is reused many times, the PE main line crosses the herringbone in the opposite direction, and then pulls the nylon thread with the hook through the herringbone, and the knot starts from one end imitation, adjusts the length of the main line needed, and determines the length of the nylon hook line (the hook line is too long and the softness is good, the fish is good to enter, but it is easy to wrap the main line, too short, not easy to entangle the main line, and the hook line appears stiff and affects the fish suction mouth), pull the herringbone, bind the main line and the hook line, and adjust the knot up and down with a paper clip, <>

Use a steel ruler to measure the length of the hook line and then measure the distance between the first knot and the second knot of the main line, to determine the distance between the main line knot and the knot, the length of the hook and the knot, tie the knot in turn, on the lead lump, you can also tie a figure eight ring at the bottom of the lead leather seat hanging lead skin, this lead lump is to deal with the river water serious selection, the top of the hook is tied with the activity of the card ring, can be directly used as a line to connect the table fishing figure eight ring.

Fishing is an ancient and popular sport, and in the process of fishing, the way to tie the hook is very crucial. Below I will introduce you to a simple and easy-to-learn binding method, and attach **** for you to better understand. Take the hole.

1.Preparation.

First, you'll need to have your hook, line, and bait ready. The length of the line depends on the situation, but in general, the length of the line should be slightly longer than the length of the rod. The choice of hook also depends on the purpose of fishing, and generally speaking, choosing the right hook can improve the success rate of fishing.

2.Binding steps.

Step 1: Start by threading the line through the hook's eye.

Step 2: Then wrap the line around the handle of the hook and through the hook's eye.

Step 3: Then pass the line through the eye of the hook and wrap the line around the shank of the hook.

Step 4: Finally, thread the line through the hook's eye and tighten it.

3. ****。

Insert ****).

4.Precautions.

When tying a fishing hook, you need to pay attention to the following:

1) The length of the fishing line should be appropriate, not too long or too short;

2) The size of the hook should match the size of the bait;

3) Tighten the hook firmly to ensure that the connection between the hook and the fishing line is firm and reliable.

The above is the binding method and **** introduction of fishing hooks, I hope it will help you. In the process of fishing, details determine success or failure, I hope you can study carefully and improve your fishing skills.

Summary. Hello, hook fishing.

First, the placement of the hook is very important when fishing, whether you can catch the fish and the placement of the hook is closely related, the placement of the hook is generally a small fish bites a small hook, and a big fish bites a big hook, so when placing the hook, you should choose a large and a small arrangement, or different types of hooks are staggered, so that large fish and small fish can be caught. Second, the placement of bait, the scientific placement of bait is also a key part of catching fish, the hook is generally three and six, the hook also has six hooks, for six hooks, you can put a kind of bait every three, but also interspersed to put bait, if you float fishing then you can fish grass carp below, silver carp fishing above, if you want to play bottom fishing, you can fish grass carp on the top, crucian carp or crucian carp below. Third, the application of the three of the hook, the brain line, and the main line, the brain line and the main line of the hook are connected together, which will affect the bait swallowing activity of the fish, so the hook and you are talking now, connecting the main line and the connection, the main line of the lead sinker, use it upside down so that each hook will hang backwards and low, which greatly increases the probability of the fish being hooked.

Fourth, the role of the string hook and the bomb hook cooperation, the string hook and the bomb hook cooperate and also have the hook does not have the fish nest, both the hook and the fishing, when the bomb hook is matched, the main line is connected with the hook first.

How to use string hook fishing.

Hello, hook fishing.

First, the placement of the hook is very important when fishing, whether you can catch the fish and the placement of the hook is closely related, the placement of the hook is generally a small fish bites a small hook, and a big fish bites a big hook, so when placing the hook, you should choose a large and a small arrangement, or different types of hooks are staggered, so that large fish and small fish can be caught. Second, the placement of bait, the scientific placement of bait is also a key part of catching fish, the hook is generally three and six, the hook also has six hooks, for six hooks, you can put a kind of bait every three, but also interspersed to put bait, if you float fishing then you can fish grass carp below, silver carp fishing above, if you want to play bottom fishing, you can fish grass carp on the top, crucian carp or crucian carp below. Third, the application of the three of the hook, the brain line, and the main line, the brain line and the main line of the hook are connected together, which will affect the bait swallowing activity of the fish, so the hook and you are talking now, connecting the main line and the connection, the main line of the lead sinker, use it upside down so that each hook will hang backwards and low, which greatly increases the probability of the fish being hooked.

Fourth, the role of the string hook and the bomb hook cooperation, the string hook and the bomb hook cooperate and also have the hook does not have the fish nest, both the hook and the fishing, when the bomb hook is matched, the main line is connected with the hook first.

Reconnect and finally connect the bomb hook. Fifth, when using a string hook, generally do not vigorously go to the rod, but gently lower the rod, so as not to scare the fish away and alarm the fish.

How to fish with a string hook. One. Yes.