How to hook shoes, how to hook slippers

Start by hooking 16 pigtails.

Take the braid of the first hook as the first stitch and the braid of the last hook as the 16th stitch).

Start Circle Hook:

The first round of the second stitch starts with the 13th braid (three braids as the first stitch), the second stitch begins with 5 medium and long stitches, 7 long stitches, and finally 7 long stitches in the first braid. After the 7 stitches are hooked, they turn to the bottom, corresponding to the upper half of the hook, first hooking 7 long needles, then 5 medium and long needles, and hooking 6 medium and long needles in the 13th braid. (Add the one with three pigtails, and there should be 7 stitches in the last stitch as well).

Note: The first braid is the toe and the 13th braid is the heel.

The second lap: from now on it's all long needles. Hook 3 stitches of the braid (as the 14th stitch).

Then hook one stitch in each hole of the first circle, (when you hook the first braid, don't you have 7 stitches in it, two stitches from the needle, two stitches in the fourth stitch, two stitches in the third stitch), and start the second half of the hook (in the 13th stitch, counting the braid, there are also 7 stitches: 2 stitches in the 3rd stitch, 3 stitches in the 4th stitch, and 2 stitches in the fifth stitch).

Note: The sole hook is finished.

Continue hooking (upper)! Hook two more circles, the hook method is the same, hook to the second needle (note that it is the toe) hook two needles and then combine the needle (that is, first hook two needles and then merge into a needle), then hook a needle, then hook two needles and needle, and then hook a needle, and so on, hook to the second needle of the lower half of the circle (or the toe part). There is a hole and a needle in the back.

The last loop: the method is the same as step 4, but when the hook reaches the tip of the second needle, it is: hook two needles and needle, and then hook two needles and needle, there is no separate hook needle.

Lock a row of edges. Let's hook a shoelace on the side of the shoe. Don't forget to nail a button. A shoe hook is finished!

The first step of how to hook shoes: hook the line on the bottom of the shoe, then hook four rows, hook a short needle with wool on the bottom line, and do not hook four rows on the heel. After the four rows are hooked, start to weave the wool thread, according to the shape of the bottom.

You can choose the thickness, color, and pattern of the wool according to your preferences; According to the thickness of the wool and the size of the sole, add a needle on both sides to form a fillet when weaving the second row, add a needle to the width of the weaving end, not too much, and the bottom of the weaving is better than the sole to be a little smaller, because the wool shrinkage is good and the weaving will be too large and uneven.

How to hook shoes Step 2: Sew the woven sole on the sole, if you want to wear it more comfortably, you can add some thinner sponge and put two layers under the wool. When you get to this step, you should pay attention to leave a thread that is longer than the sole, and it should be more the size of the sole, so as to ensure that both sides are flat and not crooked.

Hook a broken needle at the end, and hook the thread just left from the broken needle and tighten it. Don't hook every side, but hook the right side, if you hook each side, the shape of the shoe will not be harmonious, and the upper will be high.

How to hook shoes Step 3: Start choosing the color and pattern you like, but the pattern must be about the same size as the sole, and try to hook in the middle of the shoe when hooking, three big needles before and after, and more than 20 lines of thread change.

How to hook shoes The fourth step: the first few steps are relatively easy to get started, in fact, the most important thing to hook shoes is to grasp the last step, the last step is to twist the needle after hooking, and the needle must be twisted a little tighter, so that it will be thicker and warmer to wear.

The specific steps to hook shoes are as follows:

1. The first step is to use the awl of the shoe to put a strong thread on the sole.

2. Sew the insole to the sole with a needle and thread.

3. Start the needle from the front of the sole and hook two short needles.

4. Thread the yarn in the front of the sole.

5. Hook the upper with a double long needle, repeat the above steps until the required length, and weave to the last needle, that is, complete the specific operation of hooking the shoe.

Tools Raw materials: coarse wool, crochet hooks.

1. First of all, prepare the soles of the good line, start to hook a circle of bottom lines from the toe position, and leave a line beyond the length of the sole when hooking.

2. After a circle of bottom lines is hooked, hook the left tail line into the last stitch, and then tighten the line so that it is fixed (the toe head should be hooked a little tighter, because the line is thicker and the distance will be farther, which is not conducive to starting to hook the upper).

3. Then pull the main line to the other side, and the line should be hooked a short needle at an angle forward.

4. Then hook a "medium and long needle" every other needle, and hook a total of "5" long needles on the toe cap (one needle must be hooked forward for each fixed needle).

5. In the process of crocheting halfway, there will be inconsistencies on both sides, which is a normal situation.

6. As long as you hook forward a little more, this gap can be flattened.

7. In the process of crocheting, it is necessary to compare with another crocheted shoe from time to time, so that the two shoes can be the same.

8. And when the hook is in the middle position, two needles should be fixed forward, and both sides should be consistent.

9. When hooking to the back rows, tighten the line appropriately to avoid the cuff being too fat.

10. In the last few lines, hook three stitches backwards, so as to show the arc of the slippers, and pay attention to the consistent position of the edges of the two shoes.

11. When the slippers are hooked to the last line, this row does not hook the medium and long needles, but instead hooks a short needle.

12. Cut the thread after the hook is completed.

13. Hide the thread again.

14. a finished product.

How to hook shoes:

Preparation materials: soles, wool, crochet hooks.

1. First of all, the hook shoes must first choose the sole of the sole, and it is best to buy the one that has been on the line, which is convenient.

2. Then use a short needle to hook the sole of the shoe, and the size is about the same as that of the sole. Once the hook is complete, continue to hook a short circle of needles around it.

3. Then put the finished bottom surface to the sole. Remember that the number of needles must be evenly distributed.

4. Next, hook two short needles at the junction between the edge and the center of the sole.

5. Then you can hook the upper. Start by hooking six to seven sets of medium or long needles (two needles each) on the toe cap, leaving enough length of thread on the left side to close the needle.

6. The first four or five lines of the last toe toe, the starting and closing needles of each row should be close to the front row, and the starting and closing needles of each row in the back should be spaced one needle, and the hook will be hooked until the celebration is accompanied by a friend.

Hook shoes full tutorial: 7 stitches of braids, gradually grow with the shape of the shoe, slightly more than the sole of the braid needle circle, and the line on the sole hooked together. Determine the position of both sides of the upper, (note that this is more difficult to grasp, the length of the face should be appropriate, I am a size 39 shoe, the foot is fat) half a circle hooked a total of 63 stitches (including the addition of Jianpei chain needle:

Add 1 stitch every 3 stitches), hook back and forth 4 rows, and each side of each row has a slope from the second stitch.

The fifth row of short needles is about 61 stitches, hooked to the toe cap 36 needles to be fixed with a pull needle to hook back 5 needles of braids, 4 needles and 1 short needle, and then 4 needles and 1 pull needle to fix the middle town, in turn on the braid needle hook 1 short needle, 1 middle needle, 1 long needle, 1 medium needle and then 1 short needle, on the upward short needle 1 pull needle fixed, 1 circle on the hook, the back is compared with the first hook. After the first row is hooked, fix it on the needle that hooks the braid with a pull-out needle, hook 3 short needles forward, fix the 4-needle pull-out needle, and fix the braid with 5 needles. And so on.

Finally, with 4 needles of braid to stop the sun needle and the reserved edge of the hook (so that the mouth is tighter), with 5 rows of short needles to close the edge, the upper is hooked. The heel is hooked with a short needle, and each line is retracted by a needle, (the first needle is not hooked) so that there is a slope, just like the bottom of the upper line on the hook, about 20 lines, depending on the size of the foot.

The step-by-step hook shoe tutorial for beginners is as follows:

First: First of all, we need to lay the foundation, the starting point is on the side of the shoe, we will crochet through the bottom line, hook the yarn, and then hook the line out from under the bottom line. Hook the wire, pull it out of the coil, and pull it tight appropriately.

Second: then hook the thread out of the bottom line, wrap the thread around the crochet needle, and pull the thread out from the two coils. This is a short needle method, and the bottom thread is hooked with the same needle method.

Third: Next, start crocheting the upper and thread the crochet needle directly through the adjacent holes. Wrap the thread around the crochet needle, hook the crochet needle to the winding, and pull out the pores from the end of the thread to form 2 coils. Hook the previous one through the back one to form a coil.

Fourth: Hook the crochet needle to the end of the thread, stretch it through the coil, and remove the crochet needle. Pull the thread tight, but don't cut it yet. The first row of the upper is hooked.

Fifth: Next, start to hook the second row, and the position of the needle is on the right side of the first row of needle holes, separated by 1 pinhole. The wire is taken out of the pore to form a coil. Wrap the thread around the crochet needle, take the thread out of the coil, tighten it appropriately, and complete the second row of needles.

Sixth: Then when the needle is closed, the crochet needle is inserted into the two holes, and the stitching method is the same as in the first row.

Finally, it is the same method to hook the rest, you can add patterns, novices are recommended to hook the flower first, try the hand, a slipper hook.