The top floor is too cold, how to heat up, how to solve the cold on the top floor

If it's too cold on the top floor, you can close all the doors and windows so that it's not too cold, and you can install an underfloor heating so that you can also get warm, and you can use the heater to wear more clothes so that you can get warmer.

The top floor is too cold to heat the air conditioner, you can buy heating equipment for heating, there are many ways. The most cost-effective way is to install a circulating pump to speed up the circulation of water in the radiator, and the temperature will rise quickly.

First of all, when I decorate, I have to give the reservation department a layer of insulation for my wardrobe, and then the basement is underheated, which makes it warm and not cold at 5 o'clock.

There are many ways to heat this, air conditioning is definitely not good, you can use electric heating, small heating stoves, and now there are particle heating stoves are very good; You can also make an electric kang or spread an electric blanket. What I'm talking about is very common now.

Doors and windows are sealed and reinforced, and new doors and windows can be replaced. Take a look at the ** ventilation, all blocked. Add heating equipment to the room, such as air conditioners, heaters.

If it is a group heating, add several sets of radiators. The bedroom can be separated from the rest of the area, with a sliding partition door that can be closed while sleeping.

(1) The reason why the top floor is cold in winter:

The low temperature on the top floor is mainly caused by cold air running around it, and the temperature on the top floor is relatively constant, and there is no good heating system, so the cold air will always surround it to cause the temperature to be low.

2) the reason why the penthouse is hot in summer;

In summer, when the sun is big, the roof is not covered, and the sun will be exposed to the roof, and when the heat is dissipated downward, it will cause the accumulation of heat to dissipate, and the whole room will be stuffy in the high temperature, so the roof is generally very hot in summer.

For the top floor and side households, the exposed surface area of the house is larger than that of other people's houses, and the heat is easy to lose; Of course, the heat storage of the house is also related to many other factors, such as the material, thickness, sealing performance of the maintenance components, etc. Since the location of the subject's home must not be changed, I suggest that you can replace the windows with better sealing, such as the double-glazed windows commonly used now, with an air layer in the middle, which can be better insulated. This has a big impact on keeping the house warm.

In addition, sliding windows are more airtight than casement windows, and can also have a warm effect.

The top floor is very cold, the attic I used to live in, it was too cold in winter, there was no air conditioning, and there was no heating, so I could only buy some insulation materials to paste the doors and windows, there was no good way.

The top floor is cold only with heating, there is no heating, and electric heating can be used.

Ann heating. Or buy a small sun and so on for heating.

The top floor is cold, how to solve this situation? It's best to use foam board to thicken the top floor, so why don't you see better?

1. Ventilation. The ceiling on the top floor is always exposed to the sun, so the windows in the room should be opened to allow the air in the room to circulate, so that the heat in the room can be taken away. You can also use an electric fan to blow it, which can also reduce the heat of the room.

2. Install air conditioning. Buying an air conditioner to install in the room can be said to be the easiest and most effective. Once you enter the room, turn on the air conditioner, and after a while, you will feel cool. The bad part is that there will be a temperature difference after going out.

3. Spread black foam. Spread a layer of black heat-absorbing foam on the roof and press it with stones to prevent it from being blown away by the wind. This can also alleviate the heat in the house to some extent. However, it should be noted that during a typhoon, the bubble needs to be closed.

4. Awning. Welding an awning on the roof can also act as insulation. And under the shade of the awning, you can also carry out activities.

It should be noted that because the height of the awning is relatively high, it must be welded firmly, otherwise, the wind on the roof of the building is relatively strong, and it is easy to be blown down by the wind.

5. Make a thermal insulation layer. It is now common practice to make another layer of insulation on the roof of the building. The insulation layer is mainly framed by wooden piles, and then covered with tiles, which themselves do not absorb heat.

There is a space between the thermal insulation layer and the roof of the building, which can also play a role in heat dissipation. It's just that the cost of making this insulation layer is relatively high.

The best way to insulate the top floor is to use foam board practices:

Clean the floor first, spread the foam board directly on the roof, its thickness is about 10 cm, if you want to have a better thermal insulation effect, you can spread it thicker. After paving, pour late cast concrete and asphalt on it, and then pave some small stones, and you can also spread a layer of cloth, but you can't choose black, white is more suitable.

Generally speaking, foam board has no bearing capacity, if you want to use foam board as roof insulation, then the steel bar of the ceiling must pass through the foam board, and then install it on the floor slab to be more firm. In addition, simply put a small hole in the side of the foam board close to the ceiling, be careful not to pierce through, which can also play a role in sound insulation.

The role of the foam board:

1. It can manufacture rusty anti-rust paint. It can be applied to the surface of rusted steel, which can play a role in penetration, rust prevention, anti-corrosion and other effects, and it is also widely used in the surface paint of civil furniture.

2. It can be used to make multi-functional resin glue. This glue has good adhesion, high gloss, good impact resistance, and excellent acid and alkali resistance, and is widely used in the manufacture of various glass products, which can reduce the cost of production.

3. Make asphalt reinforcing agent. This kind of dough-boosting agent can not only play a role in waterproof and heat resistance, but also is a top-level building material.

1. Lay some wooden planks on the roof of the roof, or put some sundries, or set up a sunshade black net or sprinkle some water. 2. Plant flowers and trees on the roof of the building, or plant some potted plants or climbing plants with wide leaves on your balcony, which can not only reduce sun exposure but also beautify the environment. 3. Install double-glazed or vacuum-glazed windows, and the thermal insulation effect is more obvious.

4. Install a sunshade and rainproof shelter outside the window, which can block direct sunlight, and when the weather is cold, put it away when it is not in use, which is often affordable. 5. The use of bamboo curtains, gauze curtains, and blinds in the room can also play a shading role, which can reduce about 35% of radiant heat. For more information about how to cool down the top floor of the sloping roof, enter to view more Zheng Dan refers to more content.

Here's how to fix if the top floor is too hot:

1. Install air conditioning. The most direct way to solve the feeling of stuffiness on the top floor is to install an air conditioner, which can reduce the indoor temperature in a short time. The method of use is very simple, as long as you turn on the air conditioner after entering the room, and after waiting for a while, you will feel very cool, and the bad thing is that there will be a large temperature difference after going out.

2. Spread black foam on the roof. Prepare black foam that absorbs heat, spread it on the roof, and press the foam with stones to prevent the foam from being blown away by the wind, which will also reduce the stuffiness in the penthouse. However, it should be noted that in the event of a typhoon, the foam must be closed in advance.

3. Welding awning. Welding an awning on the roof of the building can play a certain role in heat insulation, and people can carry out activities under the awning. However, due to the relatively high height of the awning, it is necessary to ensure its firmness when welding, so as to avoid the situation that the awning is blown down when the wind is relatively strong.

4. Make a layer of thermal insulation. Thermal insulation on the roof can also play a good role in thermal insulation, and it is also a more commonly used roof insulation method. The frame of the insulation layer can use wooden piles, and then lay tiles, the heat absorption of the tiles is poor, and the thermal insulation effect is good.

After the insulation layer is completed, not only can it dissipate heat, but also have a space with the roof, which has the disadvantage of high construction costs.

1. Make an overhead layer

You can make an overhead layer above the top floor, so that the overhead layer blocks the solar heat on the overhead layer and prevents the sun from directly shining on the roof of the top floor. In addition, the air between the raised floor and the roof of the top floor slows down the transfer of heat, and the air circulation also carries away the heat.

2. Roller brush heat insulation paint

Roll a layer of heat insulation paint on the roof of the top floor, and the heat insulation paint can reflect most of the solar heat, effectively reducing the solar heat entering the room.

3. Place a plant box or water tank

Place some plant boxes or water tanks on the roof of the top floor, and plant boxes or water tanks can effectively reduce the heat of the sun entering the room, and can also prevent the sun from directly shining on the roof. In addition, plants in botany can act as shade, and when water evaporates inside the plant, it can also take away the heat.

4. Install heat-insulating bricks

Installing a layer of thermal insulation bricks on the roof of the top floor can also prevent the sun from directly shining on the roof of the top floor, effectively reducing the solar heat entering the room.