Is it better to make the roof waterproof or make a color steel roof?

It is better to make a color steel roof than to do waterproofing directly.

The roof is waterproof, but the top surface is simply waterproofed, and the function is simply to prevent leakage;

The roof of the bungalow is made of color steel tiles (as shown below), and the color steel plate roof will have a certain gap with the original flat roof, which will have the effect of thermal insulation and thermal insulation while ensuring no water seepage, which is better than simply doing waterproof and thermal insulation; In addition, the service life of the roof color steel plate is longer than that of the waterproof material - although it is higher than the waterproof, but according to their service life, the cost performance is higher than that of the waterproof material.

The flat top is then made of color steel plate secondary roof, and the size of the middle layer can be determined according to your own situation - the higher the compartment, the better the material of the skeleton. If the reuse of space is not considered, the height of the top of the middle ridge can be calculated according to the span, and the water can be smoothly walked.

It is better to make a waterproof roof or a color steel roof. The roof is waterproof, it will not crackle when it rains, and if it is made of color steel, it will crackle when it rains, and the color steel will not blow strong winds. However, if you do color steel, there is a certain space between it and the roof, which is conducive to shading and ventilation.

Each has its own advantages, if conditions permit, first do waterproofing, in the color steel roof. In general, the color gang object should be a little better.

It is better to be waterproof, after all, the effect of waterproof leakage, compactness, service life and other aspects is better, after all, the liquid can reach more places, and even the hidden and invisible position can be sealed tightly, so that there will be no leakage. Waterproofing only has problems with poor materials or inadequate construction, and the effect itself will basically not deviate, which is also the most frequent and common reason for the use of building construction.

It is difficult for the color steel roof to be completely dense and seamless, and even as long as there is a little omission or opening, the water will continue to flow in and it is difficult to volatilize and cause the roof to resurge. The other is the noise problem, which is endless, and it is difficult to avoid it unless the noise will be small when it is attached to the roof.

It's all good, it's more secure to do color steel roofs

Each has its own benefits!

Waterproof, the service life is relatively long, and the construction is more troublesome, so do the waterproof protective layer!

The color steel house should be constructed and the service life is short! Space can be used rationally!

It is better to make a color steel roof than to do waterproofing directly.

The roof is waterproof, but the top surface is simply waterproofed, and the function is simply to prevent leakage; The roof of the bungalow is made of color steel tiles and color steel plates, and the roof will have a certain gap with the original flat roof, which will also have the effect of thermal insulation and thermal insulation while ensuring no water seepage.

It is better to simply do waterproof and insulation;In addition, the service life of the roof color steel plate is longer than that of the waterproof material - although it is higher than the waterproof, but according to their service life, the cost performance is higher than that of the waterproof material.

Maintenance:

1. After the installation of the color steel mobile house is completed, the user shall not change the structure without authorization, let alone disassemble any bolt components, and shall not increase or decrease the partition wall.

2. Light steel components should be brushed and maintained once every 1-2 years to prolong the life of the product and maintain its appearance.

3. The color steel room is connected with steel structure parts, and the user arranges electric lighting equipment, and the wires cannot be directly tied to the steel structure, and the line pipe or trunking should be installed in isolation to avoid electric shock.

4. All the light steel structure color steel room connected by screws is equipped with common power sockets and other facilities, and the open line source should not be installed or hung on the steel skeleton of the color steel room, and square plastic wire pipe or trunking should be designed to be insulated and laid to prevent leakage and electric shock.

The roof is still a good color steel roof, one to shade the sun and protect from the sun, two to avoid rain and leakage, three to meet the rain and snow weather can also bear the load, if only do waterproofing, the roof itself is open, for a long time, wind and rain, no matter how good the waterproof or not.

I think it's safer to do waterproof roofs, and the color steel tiles are not too strong, and you should pay attention to safety when it rains and winds.

It must be a good color steel roof, waterproof and heat insulation.

Do waterproofing first, and then do color steel roofs if you have the conditions, the best.

It is good to make a color steel roof, and the insulation is not leaky.

Color steel tile, also known as: color profiled tile, is a color coated steel plate, rolled cold bent into various wave types of profiled plate.

Advantages of color steel tile: simple and convenient installation, which can greatly shorten our construction time.

Disadvantages of color steel tiles.

1. High maintenance cost.

The appearance of the color steel tile is sprayed with paint and plastic, and it is easy to fall off after a period of time, which affects the appearance. Therefore, maintenance is usually carried out every two years or so, that is, painting and spraying, but no maintenance does not affect the use.

2. Weak ability to resist wind and snow and pressure.

The color steel tile is lighter, relatively poor in terms of compressive resistance, and weak resistance to wind and snow.

How to brush the roof with waterproof paint.

1. Ensure the quality of waterproof materials.

To do waterproofing on the roof, we must first choose a good waterproof material, and the roof waterproof material must have quality assurance, and it must also be certified by the designated quality inspection department to ensure that the quality meets the national standards.

2. Pay attention to the slope of roof drainage.

The drainage slope of the flat roof is about 2% 3%, when the slope is less than 2%, it is advisable to use materials to find the slope, when the slope is greater than 3%, it is advisable to use the structure to find the slope.

3. Prepare the materials.

Usually, home roof waterproofing is made of liquid membrane waterproofing material, which should be carried out after the installation of equipment, pipes, etc. is completed. When paving high and low span houses, they should be carried out in the order of high and low first, far first and then near.

The above is about how to do waterproofing and waterproofing roofs, I hope it will help you! If the roof is waterproofed, there is no need to worry about water leakage in the future, so you must pay attention to it.

Summary. Hello dear, it's better to make a color steel roof on the roof.

Is it better to make the roof waterproof or make a color steel roof?

**？Hello dear, it's better to make a color steel roof on the roof.

It's better than just making a waterproof coating.

Pro, doing waterproofing on the roof is just a simple waterproofing on the top surface, and the function is simply to prevent leakage. There is no other effect. The roof of the bungalow is made of color steel tiles, and the color steel plate roof will have a certain gap with the original flat roof, which will also have the effect of thermal insulation and thermal insulation while ensuring that there is no water seepage, which is better than simply doing waterproof and thermal insulation; In addition, the service life of the roof color steel plate is longer than the service life of the waterproof material - although it is higher than the waterproof, but according to their service life, the cost performance is higher than that of the waterproof material Oh flat top and then do the color steel plate secondary roof, you can determine the size of the middle layer according to your own situation - the higher the compartment, the better the material of the skeleton, the higher the **.

If you don't consider the reuse of space, the height of the top of the middle ridge can be calculated according to the span, so that you can walk smoothly through the water.

Of course, it is good to do waterproofing, and it is still necessary to do waterproofing when making color steel tiles.

The roof is waterproof, and due to long-term exposure to the harsh weather environment outside, it is necessary to use materials with good weather resistance.

Ouqi 911 polyurethane waterproof coating is composed of polyether, isocyanate and other polyurethane prepolymer A component and curing agent B component formed by a series of chemical reactions.

Product features: 1. Easy coating, curing at room temperature, short surface drying time;

2. Strong adhesion, high elongation and high tensile strength;

3. It can be constructed on irregular and complex base surfaces, with excellent integrity and reliable waterproofing;

4. Cold and heat resistant, aging resistant, convenient construction;

5. It has a certain corrosion resistance.

Scope of application: 1 Underground buildings: subways, tunnels, basements, pits, elevator pits, pipelines, concrete floors, etc.;

2. Roof waterproofing: flat roof, inclined roof, planting surface, and sloped roof of concrete, wood, steel, and asbestos product structure;

3 Interior and exterior walls, retaining walls, toilets, kitchens, and non-edible pools.

Whether it is a large area of water leakage or a small range of water leakage, it is more thorough to do waterproofing, roof waterproofing can be used waterproof membrane, not much more expensive than color steel tile, the effect is good, the construction is also simple, of course, if you use high-end PVC membrane, it is another matter.

It must have been waterproofed. Unless you seal the surroundings and make it like a house, you will only make the top, and there will still be water.

Is it good to make color steel tiles on the roof?