Why is it that the words I typed are horizontal after they are sent?

Your font is wrong, the @ in front of the font is horizontal, so I put some of these fonts on the Internet.

Yang Quanren, the founder of Quanjude, asked a Xiucai named Qian Zilong to inscribe a plaque. This plaque has been through wind and rain several times, and it has been hanging for more than 130 years. But I don't know if you've noticed:

The German character on the Quanjude plaque is missing a horizontal. Why is that? Some people say that at that time, Boss Yang invited Qian Zilong, and the two had a good drink, and Yang Quanren learned that Qian Zilong's calligraphy was very good, so he immediately took out a pen, ink, paper, and inkstone, and asked Qian Xiucai to inscribe a word.

Because Qian Xiucai drank two more glasses, his spirit was a little trance, and he didn't pay attention, and forgot to write the word "de". Some people also said that when Yang Quanren started his business, he hired a total of 13 guys, plus himself a total of 14 people. In order to let everyone work with peace of mind and work together, let Qian Xiucai write one less horizontal, indicating that everyone can't have a horizontal knife in their hearts.

What is the real reason? It turns out that as early as more than 1,000 years ago, "de" was written like a polyphonic character, which could have one horizontal or no horizontal. This can be confirmed from the inkblots of famous calligraphers of the Tang, Song, Yuan, Ming and Qing dynasties.

For example, there is no horizontal word for "de" in the imperial book "University Tablet" of the Kangxi Emperor of the Qing Dynasty, which is now standing in the Confucius Temple of Guozijian in Beijing; Another example is the Qing Dynasty painter Zheng Banqiao, who lived in the same period as the founding of Quanjude, wrote the word "de", some with a horizontal, and some without a horizontal. In addition, we can also examine the character "De" from the aspect of ancient Chinese coins. For example, the "De" character of "Jingde Tongbao" cast in the Zhenzong period of the Northern Song Dynasty (1004 AD) does not have a horizontal character, while the "De" character of the "Xuande Tongbao" cast in the Xuanzong period of the Ming Dynasty (1426 AD) has a horizontal character.

From the above analysis, we can draw the conclusion that in the past, there were two ways to write the word "de", which could be horizontal or not, and both ways of writing were correct. In order to maintain the original historical appearance of its plaque, the word "De" on the plaque has been missing.

Hello! Click on the a in the chat window to re-select the font, and don't choose the font with @ in front of it.

Font issues、。 Can be adjusted.

word is vertically how to type, let's talk about how to operate, I hope it can help you.

1. First of all, open the word file on your computer and click on the page layout ...... aboveThe text direction is shown in the following image.

2. Then in the drop-down options that open, click on the text direction option, as shown in the image below.

3. Then in the window that opens, select the vertical text direction and click below to confirm, as shown in the figure below.

4. At this time, go back to Word, as shown in the figure below, and you can enter the text vertically.

Whether you can input vertical text, depends on whether the current text input software has the function of vertical text, such as word, wps and other common office software basically support vertical text, the following demonstrates word (wps text and word function is basically the same, the operation process can be applied) input vertical text operation method:

First, open the Word software, and then click to open the "Page Layout" menu in the menu bar.

2. Find "Text Direction" in the page settings bar and click on the function.

3. In the pop-up text direction drop-down menu, click Use "Vertical" typesetting.

Fourth, as shown in the figure below, when using vertical typesetting, the input text will be vertical.

Select all the text, and then find the page layout in Word - Text Direction, the specific operation method is as follows:

1. Open the Word software and click "Page Layout" in the menu bar.

2. Find "Text Direction" under "Page Layout", which is a function.

3. Pull down the "Text Direction" menu and click "Vertical from right to left" or vertical from left to right.

Text is divided into horizontal and vertical lines, as well as horizontal text masks and vertical text masks. Click on the drop-down triangle of the text tool with the mouse, and a vertical arrow and a t will appear, which is vertical. Press and hold shifl+t a few times to switch between horizontal text, vertical text, horizontal text mask, and vertical text mask.

It can be set in Word.

The page layout --- text direction --- vertical.

Typing a word to change a line is to type a word and press enter.

There are two possibilities for the printer to be set to type horizontally but vertically

One is that the page layout of the document is set to portrait when it is made, but the horizontal is selected when printing, which results in only the upper part of the print and the lower half of the paper being blank by Takahashi;

Another situation is that the printer properties are set to the default portrait printing, so each print must be set to portrait, this situation will cause the first print to be landscape, but the subsequent will be back to portrait.

Solution: 1. The page layout is set to portrait.

1. Open the document you want to print, and then select [Page Layout] - Paper Orientation - Landscape in the toolbar to adjust the paper orientation to landscape.

2. After setting it to horizontal, you can see that there is a dotted line in the interface, this line represents the boundary of the paper, and the content in the adjustment document should not exceed this line.

3. After setting, click the office button in the upper left corner of the page, select [Print] - Print Preview, here you can see that the print has been adjusted to horizontal, and then print directly.

Second, the printer properties are set to print in the default longitudinal hail direction.

1. Click the start icon in the lower left corner of the computer desktop, and then click [Devices and Printers].

2. Select the commonly used printer, and then right-click and select [Printer Properties].

3. Select [Preferences] in the property window to enter the property settings.

4. Select [Basic Settings] in the window, then find [Landscape], click the dot in front, and then click OK to close the window. <>

The method of changing the **printing from Xunhuai longitudinal to transverse is as follows: 1. Select all**, click "Print Area" under the page layout tab, and select "Set Print Area" in the pop-up menu. 2. Click the "Office" button in the upper left corner of the interface, and select "Print Preview" in the "Print" tab in the pop-up menu.

3. Select "Page Settings" at the top of the pop-up Mu Qingyou interface. 4. Select the "Page" tab in the newly opened interface, change "Portrait" to "Landscape" in the "Orientation" menu, and click OK. 5. Click "Print" in the upper left corner of the returned page.

oooo

1. In Word, to underline the middle of some text, you need to select the text first, then right-click your mouse on the text, and then click the font in the pop-up options.

2. In the font settings window that opens, click the strikethrough below the effect, it will be selected, click OK again.

3. In addition, you can first select the text you want to underline, and then click the ABC underline icon in the upper left corner, so that you can also underline the text.

4 You can also click the ABC icon first and then click with your mouse where you want to enter text in the document.

5. Then start typing the text so that no matter how much text there is, it will add a horizontal line in the middle of the text.

When typing, the middle horizontal play:

Word:

1. Select the text content you want to add in the middle horizontal;

2. Click Format and select Font;

4. Click OK to complete the setting;

Figure 1 in Excel:

1. Select the cell you want to add a middle dash;

2. Click Format-> Cells to open the cell formatting settings;

4. Click OK to complete the setting; Figure II.

Such? This format can only be a feature of some software. The operation in excel is: right-click - set unit format - font - strikethrough - OK.

Hold down Shift+-Slash) and you're good to go.

Hold down shift and hit "- that is, the minus key.

It should be done by the key combination shift + minus,In the state of Chinese characters of Sogou input method,It is done with this combination of keys。 Hehe.

- Next to the number 0 on the keyboard. Input method half-width. If it is long and horizontal, it is used full width.

Directly use the "—" on the keyboard to type, a longer one with the upper gear key to add -, and a shorter one to hit directly.

That's in the font settings, and selecting strikethrough will do the trick.

Hello, if it is the Sogou Wubi input method, you can switch Chinese and then - press shift + minus keys.

First of all, because I learned foreign methods at that time. At that time, our country was in the period of New China, and then many things and contents did not know how to do, and they began to introduce advanced foreign technology to improve our new China, and later they felt that their method of writing horizontally was very good, so they introduced this method of theirs, and then changed the Chinese characters that we used to write vertically into horizontal writing.

The second is to improve people's reading efficiency. After the founding of New China, people have become different from before, their reading methods will be different from before, they hope to read quickly, and then if they use this vertical Chinese character to let them read, it will definitely slow down their reading speed, and later people found that this kind of horizontal Chinese characters read very fast, because people's eyes are horizontally long, not vertical, so if Chinese characters are also written horizontally, then they will quickly read these contents, The rate of reading will also increase, so they have adopted this method of writing Chinese characters horizontally.

Finally, it is to change the old face of China. At that time, our country was founded by New China, and then we needed to change all the previous drawbacks, so as to make our new China better, they found that this kind of vertical writing of Chinese characters was too troublesome, and then they needed to think of a way to change the status quo, and then they saw that foreign countries were writing Chinese characters horizontally, and then they felt that we could also write horizontally, and then we could replace our previous very troublesome method, So they replaced the horizontal Chinese characters with the vertical ones.

In short, at that time, they chose to replace vertical Chinese characters with horizontal Chinese characters because they felt that vertical Chinese characters were too troublesome.

At that time, our country was in the period of New China, and I didn't know what to do with many things and contents, so I introduced advanced foreign technology to improve our New China.

The change of Chinese characters to horizontal writing mainly began in the late Qing Dynasty, when the continuous influx of Western ideas slowly changed the habit of writing vertically from right to left.

The change in Chinese characters from vertical to horizontal writing began with the New Culture Movement. At that time, many literati fully embraced Western culture, including their writing habits, and we changed to writing horizontally.