When renovating the bathroom, what does the sink next to the sewer pipe do?

When renovating the bathroom, what does the sink next to the sewer pipe do?

Bathroom decoration, now the shower room is popular to install this kind of drainage trough, the water is fast and beautiful.

The bathroom is a place to pay attention to decoration and cleaning, and you must not be lazy. As the most functional place in the house, the waterproof, drainage, and non-slip of the bathroom must be done well, otherwise you and your family will feel a lot of inconvenience when using it in the future.

When it comes to the decoration of the bathroom, I personally think that the most important thing is drainage. If you think about it, the bathroom drainage is not done well, and the tiles are wet, which will not only affect the waterproofing of the floor and wall roots, but also make the ground wet, thus bringing potential safety hazards. Today, I'm going to talk to you about what floor drain is best for installing in the bathroom.

Now the bathroom decoration and shower room are popular with this kind of drainage groove, and the drain speed is faster than the ordinary floor drain design, and it is beautiful. To put it simply, this is also a floor drain, but it is a distinctive floor drain design. Compared with the small circle floor drain design, this design method has a much larger drainage volume, making the drainage of the bathroom more efficient.

If this is the design used in your bathroom, then you and your family don't have to worry about the drainage of the bathroom at all.

For the sake of beautiful decoration, some friends like to install the floor drain in the bathroom in an inconspicuous corner. In this way, the floor drain will not affect the integrity of the floor tiles, and it looks a lot more beautiful. However, from a scientific point of view, this is not feasible behavior, you must know that when we decorate and drain, it is best to install floor drains along the direction of the water flow in the bathroom, otherwise the drainage efficiency is very low, which brings a lot of inconvenience to our daily life.

Generally speaking, an experienced decorator will tilt the floor of the bathroom a little bit to determine the direction of the stagnant water, so as to make the drainage of the bathroom more convenient.

In addition to the design of the floor drain, the separation of dry and wet in the bathroom is also very important. Of course, a little experienced decorator will know that you don't have to worry when dealing with this, as long as you communicate with the decorator, he will design the effect you want.

The sink next to the sewer pipe is used for drainage, and it is used to plug in the sewer pipe of the washing machine in the later stage.

This sink is actually used to hold some water, because it needs to be used when decorating.

It is used to clean rags. That sink can be used to wash some rags and can also be used to pour some water.

<> "How to install the toilet sewer pipe.

1. Check the integrity of the water pipes and fittings before installation to see if there is any damage or omission. In order to avoid cracking, water leakage and other phenomena after installation.

2. After checking that it is correct, measure the thickness of the wall tile, and then determine its installation position according to this thickness.

3. After the position is determined, the installation can begin, and it is recommended to adopt the overall installation method, and at the same time, the limb should be reduced and the connecting accessories should be used less, so as to avoid the problem of leakage in the later use. If you use a connecting fitting, you need to make sure that it is secure. In addition, during the installation process, it is also necessary to pay attention to the layout of the washing machine, socket and other positions, so as not to affect the use.

4. Finally, after the installation of the sewer pipe is completed, check whether there is leakage, and if not, it can be used.

What are the types of home improvement water pipes.

1. Aluminum-plastic composite pipe.

Aluminum-plastic composite pipe, also called multi-layer pipe, is aluminum in the middle, and the inner and outer layers are plastic, which not only has high toughness, but also can be bent at will, and at the same time resistant to high temperature, and because the aluminum layer is in the middle, it is isolated from the air, which can inhibit the growth of bacteria. However, it is necessary to use the ferrule method to connect.

2. PPR tube.

PPR pipe is mainly made of polypropylene material, non-toxic and tasteless, green and environmentally friendly, it needs to be connected by hot melt method, although the pressure bearing capacity is general, but it is cheap, and the use is long, the pipe is easy to grow moss, scale, increase the resistance of the pipe, and affect the water output.

3. Stainless steel water pipes.

Stainless steel pipe is a better metal pipe, with many advantages, one is health, because it has a smooth inner wall, will not foul, will not pollute the water source. Second, it is fastened and durable, and can withstand temperatures of minus 40 degrees to 120 degrees Celsius for 70 years. Third, it is easy to install, just use the clamping pliers, and the double clamping connection can be successfully installed, and it is easy for inexperienced people to get started.

If the house is on the first floor or a high-rise building with drainage on the same floor, you can move it to the drain.

Now you have two water pipes with different functions connected together, which is normally smelly and unhygienic.

Once the case is blocked, it is very nauseous.

If you can't move the drain, move the pool position.

If you really can't do it, the hose will go a few meters more, but you must pay attention to cleaning at ordinary times.

Bad, 1: hygiene, bacterial cross-infection 2: bad taste, although the pipe has a reverse bend, but it cannot be completely solved. 3: If you live on a low floor, in the future.

A pipe leak is going to affect the kitchen. If you don't do this, it is recommended to replace this decoration team.

There is a hidden danger, once it is blocked, the feces enter the kitchen, who can stand it? Take 10,000 steps back and say, there is really no way, you have to manage it together, you must set up a water trap, otherwise it will be enough for you to stink.

Don't make trouble for yourself, the renovation workers try to save trouble, you have to live for a long time, do what you have to do, don't listen to them.

Irrationality!!! A pipe leak is going to affect the kitchen. If you don't do this, it is recommended to replace this decoration team.

Irrationality!!! You'd better direct the water above the kitchen drain pipe!!

Yes, it is basically domestic sewage.

But if it is done by the decoration personnel, it is not suitable, and it has been prepared in the rough room.

It's unhygienic, it's better not to, otherwise every household won't have a sewer.

It's unreasonable to have a bathroom that won't work one day haha... I'm engaged in decoration...

Now come to the kitchen sink sewer pipe varieties are annoying, the purpose of the pipe bending is to store water and prevent smell, also known as the water storage bay, the water bend of your kitchen sink sewer pipe is too long, allowing for backwater, personal opinion, and the easiest way is to paint the white pvc pipe to the color part of the mourning, and insert the gray hose into it.

Your pipes are a bit of a problem connecting, there is too much water stored in the ash pipes, and the water level is too high.

The white pipe should be sawn short:

In fact, the angle valve is not installed, and the bad head is not good to maintain.

Kitchen sink drain pipe is something we use every day, do you know its material type and installation method? Hurry up and learn, it's always good to learn one more skill to defend yourself. (1) Material.

There are two main types of sewer pipes for kitchen washbasins: one is a plastic sewer pipe and the other is a stainless steel sewer pipe. Both materials have their own advantages and disadvantages:

The manufacturing material of plastic sewer pipe is excellent PP, and its advantages are: it can be bent and deformed at will, strong toughness, and cheap price. The disadvantages are: easy to damage, fiber digging history is not frost resistant, easy to leak, short service life.

The manufacturing materials of stainless steel sewer pipes are stainless steel and ABS engineering plastics, which have the advantages of anti-aging, strong corrosion resistance, simple installation, strong and durable, and long service life. The disadvantages are: easy to rust, ** high.

2) Shape. There are also two main types of drain pipe shapes for kitchen washbasins, one is a straight-through type and the other is an S type.

Straight-through sewer pipes help to improve drainage efficiency and reduce space occupancy;

The S-shaped sewer pipe is shaped like an "S", and its function is to prevent odors, so the shape design is more unique, but it also takes up much more space than the former.

Installation Steps. After introducing the basic knowledge of kitchen sewer pipes and determining the type to choose, let's take a look at how to install it:

First of all, prepare the punching tool and make a mounting hole in the wash basin (this is required for the first installation, please start from the second step to replace the sewer pipe).

Prepare the newly bought drainer, disassemble the fixing parts and flange at the lower end of the drainer, and then fasten the flange under the washbasin, and after putting the flange tightly, you can put the basin on the sink, and then align one end of the sewer pipe with the hole where the sink is placed in the washbasin.

Wrap a layer of waterproof tape around the corresponding position of the sewer pipe, then align the other end with the sewer pipe, adjust it to the appropriate position and length, then take out the accessories, and tighten the interface between the sewer and the sewer pipe with a wrench.

Check that the ends of the basin drain are properly adjusted, tightened, missing parts, and leveled.

5. After everything is correct, the final waterproof test is to fill the washbasin with water and observe the leakage of the drainer from the side. If there is no leakage, it means that the sewer pipe has been installed; Otherwise, it needs to be rechecked or even reinstalled.

Through the introduction of kitchen washbasin drains in this article, do you have a deeper understanding of this problem? Once again, I would like to remind you that the installation of sewer pipes must be carefully selected according to the actual situation.