How to make styrofoam? No glue, no borax, no baking soda, no laundry detergent, no laundry detergent

Ingredients: white gum, aloe vera gel, borax water.

The steps are as follows: the first step: first add white glue, the amount of white glue 90% determines the size of the finished product, can not pour more or less!

Novice babies should pay attention, the white glue on the market, there are many patterns, and ** up and down fluctuates greatly, there are very cheap, there are also very expensive, although the mud made may be thrown away after playing a few times, but remember, you can't choose too inferior white glue, otherwise you can't make a good mud, not to mention, the ingredients contained in it, may also endanger your health!

So what does a bad white gum look like? The texture of bad white gum will be too thin, and it will contain impurities, small sugar cubes are deeply affected, this novice babies must pay attention to the selection of quality and ** similar white gum, which is also very helpful for making a fun mud!

Step 2: In fact, this step can be ignored, can be added or not, there are many babies ask small sugar cubes, what is the role of this step?

In fact, this step really doesn't have much effect, it won't affect the finished product later, but it will make the mud more perfect! The meaning of "perfect" in this is to make the finished product have a certain particularity, give an example to the friends, for example, someone made a mud that can repel mosquitoes, which is added to the "flower water", and someone made a fragrant cement, then it is added to the "perfume", so the same can be obtained, the mud with hand cream is added to the hand protection when playing, are you still satisfied with this explanation?

Step 3: Add an appropriate amount of aloe vera gel, this thing can be of great use, and these things added, all have the effect of "hand care", friends should also pay attention to hand care when playing with mud, aloe vera gel replaces the traditional shower gel, hand sanitizer, will the effect be better?

Step 4: Add the appropriate amount of borax water, for novice babies, the amount of borax water is the most difficult to grasp, adding too much, will make the final product too hard, too little will make the mud too thin, so the amount of borax water has always been the most difficult place for novice babies to master, here small sugar cubes to give you a little trick, is to add a small amount! What is "a little more"?

It means to add borax water little by little at a time, and then slowly according to your own feelings, like a little harder mud, you can add a little more, like a little less, you can add a little less, little by little, so as not to start too hard at one time, which is the same as the noodles!

In the end, the finished product appeared, and the novice baby must pay attention to the fact that the last step should be controlled when adding borax water, and the first step, the amount of white glue should be controlled, so that the simple and fun "styrofoam" will be made!

Ingredients: clay, shampoo, laundry detergent, warm water.

1. Put the clay into the bowl as shown in the picture below.

2. Add shampoo to the New Year's coat, as shown in the figure below.

3. Add an appropriate amount of warm water, as shown in the figure below.

4. Use a spoon to stir thoroughly, as shown in the figure below.

5. Pour in an appropriate amount of laundry detergent and mix thoroughly, as shown in the figure below.

6. As shown in the figure below, foaming glue made of laundry detergent is not used for glue.

That's it. <>

Glue-free styrofoam is a simple way to make homemade styrofoam with only laundry detergent, and the method is simple.

Styrofoam without glue production method——

Using ultra-light clay, first soak the ultra-light clay with water, then put in an appropriate amount of glue, add pigments according to your favorite color, add appropriate starch, and finally add a large amount of shaving foam to stir, so that the foaming foaming gum is made.

Styrofoam is an adhesive used for sealing various gaps in the room, styrofoam can be better sealed and fixed, the usual styrofoam is made of glue, borax and shaving foam, because it can be blistered, so it can be better sealed and fixed, but in industrial production in order to reduce the cost of styrofoam, paint solvents will be added.

How to make styrofoam without borax without glue You can use laundry detergent, snowflake mud, and ultra-light clay to make your own styrofoam. First dissolve the laundry detergent into the water carefully, and then mix the laundry detergent water into the snow mud and ultra-light clay, and mix it thoroughly to make foam gum. Tools Required:

Laundry detergent, snowflake mud, ultra-light clay. The specific operation steps are as follows: 1. First of all, prepare a glass of water 2, then, add laundry detergent 3, next, at this time, you need to stir the laundry detergent evenly, 4, then, take ultra-light clay and snowflake mud, the left side is snowflake mud, the right side is ultra-light clay, 5, next, after mixing the two evenly, put them in a bowl 6, then, at this time, add the laundry detergent water that has just been prepared 7, next, mix evenly, so that the snowflake mud and ultra-light clay will become gelatinous, 8, then, Pour the mixture of the gel directly on the table, rub it with your hands, 9, finally, so that you can make the bubble wide glue successfully, precautions:

1. Don't add too much water, it's not easy to form. 2. Don't use too much laundry detergent. As the main body of slush and ultra-light clay, a few more can be added.

How to make styrofoam without glue: Prepare a container, add salt and purified water, and melt the salt. Prepare another empty container and pour in dish soap.

Stir with transparent shampoo, then add the prepared salt water, continue to stir, and stir until it is semi-solidified.

Styrofoam is a kind of entertainment product, mainly made of glycerin, water, borax, it has the characteristics of soft, foaming and so on. The playability of styrofoam is very high, which can develop children's intelligence very well, so children like it more.

However, it is necessary to control the time when playing with socks, because styrofoam is made of borax, glue, etc., which are toxic and will cause certain harm to people.

Precautions for playing with styrofoam

To avoid the styrofoam molding is not soft enough, you can add an appropriate amount of glycerin and other soft things to stir. It is best to add warm water when stirring, which can ensure its softness and better drawing. After a good period of styrofoam, most of the water will be lost due to contact with the air, and at this time, you only need to rub it with warm water or Ganhe land oil to get a new styrofoam.

If there is too much glue and the foaming glue is particularly sticky, you can wait for it to evaporate for a while longer. When purchasing styrofoam products, you should first check whether the packaging is marked with the manufacturer's name, factory address, production date, shelf life, toy safety implementation standards and other information. Avoiding the purchase of unclear labels and unknown sources is an important principle to ensure safety.

The methods of making foaming gum without glue include white gum plus effervescent tablets, edible alkali plus shower gel, toothpaste plus edible alkali, shampoo plus edible alkali, soapy water and corn starch, Coca-Cola plus toothpaste, etc.

1. White glue and effervescent tablets.

Mix the white gum and water together, then stir in one or several effervescent tablets.

2. Edible alkali plus shower gel.

Put an appropriate amount of edible alkali and shower gel into the balance mill, stir well, wait for a few minutes, and then you can make styrofoam.

3. Add edible alkali to toothpaste.

Mix an appropriate amount of toothpaste with edible alkali, add a small amount of water, and stir well.

4. Add edible alkali to shampoo.

Mix the shampoo with the edible alkali, add some water, and stir well.

5. Add cornstarch to soapy water.

Combine the cornstarch with a little water in a bowl, add a teaspoon of soapy water and stir gently until a lather forms.

6. Coca-Cola with toothpaste.

Mix an appropriate amount of toothpaste and Coca-Cola and stir well.