How to do a diskless system, how to make a diskless system on a computer at home

Zhiyuan has no disk.

Diskless workstations.

That's good

Diskless workstations.

Diskless workstations.

Diskless workstations.

Check out ......

I don't have a tutorial, but you can learn the system of rainforest wood.

The specific steps for making a diskless system on a home computer are as follows:

1. Install a Minpei computer on the diskless server and set up the corresponding "virtual disk".

2. Install the driver and software on another computer system, and finally install the diskless client;

3. Reboot the computer, set the boot mode from the network boot mode in the BIOS, and then restart the computer.

4. Start the diskless manager on the server side, select the computer you just joined, and set it up as a super user.

5. Install the hard disk on the client computer, set the workstation to boot from the hard disk, and then upload the current system image.

6. After the upload is completed, shut down, remove the hard disk for network boot, if you can enter the system, then the diskless system has been successful.

Extended Content:

A diskless network is a network in which all workstations are not equipped with hard disks, and all workstations are started through a network server, which is a diskless network, and these workstations are called diskless workstations.

The cumbersome configuration of diskless network is more troublesome than that of diskless network configuration, and the unreasonable structure leads to the instability of the traditional diskless network system, the software is not running normally and even many software cannot run, which makes the diskless technology almost come to an end, and it is at this time that the diskless windows98 and windows2000 terminal network system came into being.

With the development of information technology and the continuous innovation and improvement of software companies in recent years, diskless systems have developed maturely, and the superiority of diskless networks has surpassed diskless networks. The development of disk-based networks to diskless networks has begun, and the transformation of network management mode is about to explode on a large scale, which is an inevitable trend and unstoppable!

1. First of all, you have to have a Qin rental station service suspicious Tong Zhaoqi as a server for misjudging workstations.

2. Turn-free workstation system is to do diskless workstation system, you can try Ruiqi diskless workstation system.

3. Set up the LAN and connect it.

Method: 1. Each simple customer computer, the motherboard network card needs to support the PXE boot function;

2. After each computer is started, the network card redirects and logs in to the server, reads the hail shed to obtain the operating system data, and alludes to the designated resources of the server into a virtual network hard disk.

After that, it is used as a local hard drive;

3. This is an ancient method, the new method is to use cloud terminals, cloud terminals are cheaper than computers without hard disks, computers without hard disks are about 800 to 1500, and the same cloud terminals are about 150 to 280 yuan;

4. The lack of cloud terminals is that the graphics card cannot be accelerated by 2D and 3D, and cannot run large-scale games.

It is not a big problem to watch movies, watch web pages, and chat normally;

5. The server generally chooses 8 cores, 16G memory, 1T hard disk, dual gigabit network cards, and half can have 20 cloud terminals or diskless workstations.

QQ company dead play.

It's Lao Tzu Di.