It is normal for the mattress comfort layer to collapse to some extent

It is normal for the mattress comfort layer to collapse by one or two centimeters. The mattress comfort layer is soft, and it will definitely collapse a little, but the collapse is too obvious to be a quality problem. The spring is elastic, compression and bounce is its characteristic, and most of the collapsed is actually the comfort layer on the spring.

Under normal use, the rate of attrition is extremely slow.

Maintenance of mattresses

In order to ensure that our mattress inner material can not be damp and can increase the comfort of the mattress, our mattress must keep our mattress air circulation when it is used in the room.

The mattress should be adjusted regularly in the direction of the mattress, after we buy a new mattress and start using it, the first year must be every three months or so to turn the direction and up and down the flip action, so that every part of our mattress is evenly stressed, so that our mattress can increase the service life.

After the mattress is bought, for the service life of the mattress, we should avoid making a single point jump on the mattress, or pressing on the mattress at a fixed point, and we should also avoid sitting on the edge of our mattress for a long time, because the above points will make our mattress uneven, resulting in a great shortening of our mattress life.

Generally speaking, the comfort layer of the mattress collapses 1-2cm is a normal phenomenon, the comfort layer includes the latex layer, the sponge layer, and some may have the brown cushion layer, etc., under normal use, its loss rate is extremely slow, you can usually turn the mattress regularly to avoid collapse problems, and help to prolong the service life of the mattress, if it collapses not long after buying it back, it means that the quality of the mattress is not up to par, you can find a business to deal with it in time, remember, you must not sleep on the sunken mattress for a long time, Otherwise, it will cause irreversible damage to bone health.

Summary. If the middle collapses, it must be too strong, and the next time the strength is smaller, this time the remedy is: one side is reversed, and the other is single-sided, then disassemble the bottom and fill it with some sponge until it is flat.

1: The mattress with the collapse of the sleep center belongs to the middle low and the two ends are high in terms of sleep structure, on the contrary: the body is upturned in the middle of the sleep, and the middle of the body sinks, the first injury is the imbalance of the body in sleep, but sleep is precisely the need for balance and relaxation, so sleeping on the collapsed mattress, the quality of your sleep will be lost, and the sleep efficiency will be low.

2: The center is concave, and the waist position can not be stretched, but the sleep time is generally concentrated and static, which suddenly causes your waist to be in an arc and reverse pressure state for a long time, and it is easy to have backache after waking up.

What should I do if the middle of the Simmons mattress collapses?

The middle collapses that must be too strong, the next time the strength is smaller, this time the remedy is: one side of the other, two if it is one-sided, then disassemble the bottom and fill it with some sponge, until the cushion is flat 1: sleep center collapsed mattress, from the sleep structure belongs to the middle low, both ends are high, on the contrary:

The body is upturned in sleep, and the middle of the body sinks, the first injury is the imbalance of the body during sleep, but sleep is precisely what needs balance and relaxation, so sleeping on a collapsed mattress, the quality of your sleep will be lost, and the sleep efficiency will be low. 2: The center is concave, and the waist position can not be stretched, but the sleep time is generally concentrated and static, which suddenly causes your waist to be in an arc and reverse pressure state for a long time, and it is easy to have backache after waking up.

Hope it helps, dear

If Simmons has a feeling of collapse, it is better to replace it directly. Simmons is mainly composed of two parts, the spring is used to support the body, and the soft material such as the sponge on the spring is used to allow you to sleep with smooth blood circulation and muscle relaxation. The mattress has a feeling of collapse, indicating that the spring of the support system is not good.

One look: look at the brand, look at the process. Simmons on the market today has three types: mechanism and handmade or partially handmade.

Generally, the quality of products produced by modern equipment is more advanced, and brand-name products can be purchased. In addition to looking at the brand, it is also necessary to look at its quality. From the surface to the inside, first look at the surface technology of the mattress, and then see whether the quilting is delicate and has no skipping stitches, the surrounding is straight and not rough, whether the thickness of 20 cm is very uniform, and the width of each file from 90 cm (single bed) to 150 cm (double bed) is accurate.

Two verticals: look at the bones, look at the structure. Hold the Simmons mattress flat up to see if it is out of shape.

Simmons, which has tight springs, thick fillers such as foam sponges, and scientific structures, is still flat, crisp, and angular after being erected; Simmons, whose spring is not tight and the filler is uneven and unfilled, once it is placed vertically, it will immediately be out of shape, or it will not be able to bend down straight, or it will appear concave and convex in the middle.

Three: check the filler, check the spring. Rub it on all sides to check whether the filler has a sense of thickness and equality; Rub it hard, where there is not much spring friction sound for the mechanism spring, the arrangement is tight and reasonable; On the contrary, if there is a large spring friction sound when pushing, it is mostly a hand-made spring, and the quality is unstable.

Four sleeps: Use the method of sleeping on a Simmons mattress to perceive the comfort of soft and hard. The excellent "Simmons" mattress is only the head, back, hips, and heels to bear the pressure; If it is too soft, it will make people sink down, which is contrary to human health.

Only Simmons, which is suitable for soft and hard, can maintain the minimum pressure on the contact parts of the human body, so that the waist can be supported, eliminate fatigue and improve sleep quality.

If the middle collapses, it must be too strong, and the next time the strength is smaller, this time the remedy is: one side is reversed, and the other is single-sided, then disassemble the bottom and fill it with some sponge until it is flat.

Simple 1add a brick in the middle; 2.I bought a new one.

A mattress made of good materials must be durable.

It is recommended that you change the *** one. May it help you.