What should I do to keep the water roses I just bought home?

Cultivating roses with water requires choosing the right container, and a glass vase is the best choice. To prune the branches and leaves, water-grown roses need to cut off their excess branches and leaves to avoid stunted branches and leaves due to excessive absorption of nutrients by the branches and leaves. Replace the water quality, and the rose water should be replaced once 2-3 times.

Water raised rose peanut roots should pay attention to frequent water changes, the use of rooting agents, suitable temperature and light conditions. The following is a detailed introduction from choosing a container, pruning branches and leaves, and replacing the water quality.

1.Select the container

Aquaponic roses should be selected in the right container, according to the size of the branch of the rose to choose the best glass vase. Because the glass vase is transparent, changes in water quality and the growth of rose roots can be observed. If you don't have a glass vase, you can also use a plastic vase.

2.Replace the water quality

Rose water cultivation needs to change the water quality frequently, and change the water once every 2-3 days. If the water is not changed for a long time, it is easy to develop bacterial infections, which will affect the growth of branches and leaves.

3.Prune branches and leaves

Rose water culture needs to prune the branches and leaves, the branches and leaves are too lush will absorb a lot of nutrients, resulting in individual branches and leaves due to lack of nutrients dry up and die, so try to let the retained branches and leaves can fully obtain nutrients, cut off the stunted branches and leaves.

Method of raising rose peanut roots in water1.Change the water frequently

Water-raised rose peanut roots require frequent water changes, and it is best to change the water every 2-3 days. Because plant roots need sufficient water to grow, frequent water changes can avoid bacterial infections and enhance the survival rate of roots.

2.Use rooting agents

Water-grown rose peanut roots can be added with rooting agent, which contains a certain catalyst to produce a catalytic effect and accelerate root development.

3.Light temperature

Rose water roots need sufficient light conditions, and more than 5 hours of light time are guaranteed every day. The temperature is guaranteed to be optimal at 16-28 degrees.

Methods of maintenance of roses after rooting1.Water change time

After hydroponic roses have taken root, the frequency of water changes should be changed according to the season, every 14 days in spring and autumn, 8 days in summer, and 18 days in winter. When changing the water, the scale and dirt on the inner wall of the container should be cleaned, and the water can be submerged in 2 3 of the root system, so that the root system can breathe better.

3.Control the temperature

When raising roses in water, the temperature should not exceed 30 degrees Celsius, and root rot is easy to occur in a high temperature environment. When encountering high temperature weather, it is necessary to take cooling measures and put the roses in a more shady environment, which can prevent the sun from shining on the water basin and achieve the effect of cooling. In winter, it should be kept in a warm room to prevent frost damage.

2.Extend the light

After the rose has taken root, the duration of light should be extended, from 5 hours to 8 hours per day. Sufficient sunlight can make roses bloom more delicately, prolong the flowering period, and be more ornamental.

4.Fertilization

It is best to use a professional nutrient solution to raise roses in water, which can be purchased at the flower market or flower shop. Roses are sensitive to fertilizers, and the quality of fertilizers directly affects whether they can grow normally.

1. Before hydroponics, fresh cut flowers need to be cut into an oblique horseshoe shape to increase the absorption area of water and nutrients, and at the same time, the leaves at the lower part of the branches can be pruned clean to avoid the leaves from soaking in water, causing yellow leaves and water pollution 2, frequent water change is more conducive to keeping the water quality clean, and at the same time, it is also necessary to rinse the mucus at the end of the branch with flowing water, and clean the hydroponic bottle 3, the water in the vase should not be overfilled, the 1,2 or so of the submerged branches can be added, and the nutrient solution at home can also be added dropwise 1, 2 drops.

Roses can be placed in water for 5-20 days, and the nutrient solution can be left in the water to prolong the storage time. Cultivation method of roses: water requirements, roses need to give a lot of water during the growth period to provide their growth supplement; Light exposure, the light required by roses during the growth period shall not be less than 8 hours; Fertilization management, top application of organic fertilizer during the growth period is the most suitable.

Roses can be placed in water to survive for 5-20 days, need to be pruned before water raising, cut off the branches and leaves at the bottom of the flower branches, and cut the bottom branches obliquely into an oblique shape, which can enhance the water absorption performance, and then place the wound in a cool and ventilated place to dry, and then choose a good sterilized container and pour two-thirds of the pure water, insert the flowers in the bottle, and add an appropriate amount of nutrient solution.

1. Moisture requirements

The root system of roses is developed and grows dense and vigorous, but the root system is shallow and not resistant to waterlogging, and the roses need to give a lot of water during the growth period to provide their growth supplements.

2. Light irradiation

Roses are plants that like sufficient light, when cultivated in pots, they can be placed in a well-lit and sunny area, and the light required by roses during the growth period shall not be less than 8 hours, less than that of less flowering, and the light should be kept at about 4 hours at ordinary times, which can help its normal growth and development.

3. Fertilization management spine

Roses do not have very high requirements for fertilizer, but their growth is very fast, if not timely additional fertilization will lead to growth and development is hindered, the growth period of additional fertilizer, to organic fertilizer is the most suitable, such as oil residue cake and soybean cake, if the long-term use of nitrogen fertilizer is easy to lead to soil compaction.

Pruning: Cut off the branches and leaves around the base of the rose branch trunk and cut the roots into slender oblique shapes. Prepare the container:

Choose a clear glass vase as an aquaponics container. Cuttings into the bottle: Insert the pruned rose branches into the bottle.

Maintenance management: Place roses in a warm and well-ventilated position indoors.

1. Pruning

Roses can be raised in water for 5-20 days, before water raising, the branches and leaves should be pruned, the branches and leaves around the base of the plant trunk should be cut off, and the roots should be cut into a slender oblique shape, which can increase the water absorption area, and then placed in a well-ventilated position to dry the wound.

2. Prepare the container

Choose a transparent glass vase as a container for rose water cultivation, you can better observe the growth state of the plant, then clean and disinfect the vase to reduce the production of germs and bacteria, and finally pour 2 3 pure water into the bottle.

3. Put cuttings into bottles

Insert the pruned rose shoots into the vase and add the nutrient solution.

To prolong the shelf life, you can also use diluted beer solution, or a little alcohol, white sugar.

etc., to ensure that the plants can grow normally.

4. Maintenance management

After the rose is raised in water, change the water once every 2-3 days, and wait until the root system grows to extend the water change time, generally change the water once every half a month, and at the same time place the plant in a warm indoor and well-ventilated position to avoid direct sunlight.

When raising roses in water, it is best to prune the plant first, cut off all the branches and leaves at the base of the branch, cut the root into a slender oblique shape, in order to facilitate effective water absorption, add water and culture liquid to the appropriate pot after planting, and put it in a warm and sunny environment after planting, and change the water every 3 5 days.

If it is a rose that is bought, many people don't know how to raise the rose in water to make it easy to survive, in fact, it is necessary to prune it first, cut off the branches and leaves around the base of the branch of the rose, and cut the root into a slender oblique shape, so as to facilitate effective water absorption, and dry the wound in a smooth air environment.

Choose a suitable vase, it is best to choose a pot with a deep bottle mouth, in order to facilitate the growth and development of the plant, disinfect the vase once, pour an appropriate amount of water into it, the water is mainly clean lake water or water after being exposed to the sun, and then add a little charcoal to it.

Insert the pruned branches into the vase, inject an appropriate amount of water into it, ensure that the water surface is submerged to the stem position of the plant, and add an appropriate amount of culture liquid to it for better preservation, you can use diluted beer solution, or a little alcohol, sugar, etc., to ensure the normal growth of the plant.

Put the vase in a warm and sunny environment, remember to avoid direct sunlight, ensure that there is a good ventilation environment around, it is best to change the water every 3 5 days, add an appropriate amount of growth liquid to it when changing the water, generally do not need to change the water during the rooting period, and slowly fill the water after the water evaporates.

You can prepare a transparent glass container first, you can observe the situation inside, and it looks good with the flower branches. Choose a slender shape, the mouth at the top is narrower, and the bottom can be wider.

You can put pure water, which is relatively clean, not easy to breed bacteria, and you can also use tap water, but you can't use it directly, you can put it outside to dry for a period of time, and the chlorine used for disinfection inside can be volatilized, so that it will not cause harm to the plant.

Before putting it in water, it should be pruned. Take a look at the whole plant, cut off the yellowed leaves on the top first, and remove the lower leaves to prevent rot caused by water. Cut a cross-section under the flower branch, 45 to 60 degrees is the most suitable, can increase the area of water absorption.

Before water raising, it can be soaked in hot water for 2 minutes, and then taken out and placed in water, which can effectively block the incision and prevent the juice from seeping out. Then put the plant in a semi-shaded place, pay attention to the ventilation conditions, replace the water in time, and put vitamin C tablets to prolong the flowering period.

The method of raising roses in water is as follows:

1. Prepare a slender vase, clean it after disinfection, and then add the appropriate amount of water, the water can be pure water, if it is tap water, it needs to be left outside to dry for a day or two before use.

2. Then carry out simple pruning of the flower branches, cut off the dry and yellowed leaves and petals above, and remove the lower half of the leaves, not soaked in water, otherwise there will be rotting, and the flower branches are cut into inclined incisions, which can increase the area of absorption.

3. Insert the treated flower branches in the vase and adjust the water level to the position where the stem is wide.

4. Place the vase in a ventilated, breathable and astigmatistic place for maintenance, and change the water every two days.

Precautions

The water depth of the disc container should be soaked in the height of the flower arrangement to ensure that the flower incision can absorb water in time. The water depth of the bottle container should be at the widest part of the bottle body, because the water surface here has the largest contact surface with the air, which is conducive to the smooth breathing of the flowers and reduces the infection of bacteria. The water depth should be above the incision, the water quality should be kept clean, and the water must be changed in time.

When its root system grows, the frequency of water change can be extended, almost once a half month, and once a week when the weather is hot. The temperature during maintenance should not be too high, around 18-25. Also, pay attention to the water temperature of the water change, whether it is in summer or winter, you should use room temperature water.

Blanching method: Soak the base of the herbaceous flowers in boiling water for about 10 seconds, or soak in hot water for 2 minutes, and then soak in cold water after removal, which can play a role in blocking the infarct incision and preventing the sap of the flower tissue from overflowing.

Tea method: rootless flowers inserted in a vase are easy to wither, and generally the flowering period of water flower arrangement is only three or four days before gradually withering. If you use tea (you can also use freshly brewed tea, but you must wait until the tea is completely cooled before you can use it) instead of water, you can delay the time for the flower arrangement to wither, and the tea is better to be stronger.

Flowers are arranged with tea, and the flowers do not wither within 7 days, and the flowers are bright and eye-catching.

In order to make the flower bloom for a long time, it is best to cut the incision into a 45-degree slope when cutting the flower branch, which can expand the water absorption area, and can also crack the base of the flower stem to help absorb water.

In the water used for flower arrangement, a small amount of sugar can be added to replenish the nutrients needed by the flowers.

Adding a small amount of table salt can prevent the growth of bacteria, and if a small amount of vitamin C is added, the protective effect on the flowers is even greater.

Put the nutrient solution, that's good, live for a long time.

I think it's better to put aspirin.