If the floor heating floor is soaked in water, what will be the impact on the use of floor heating?

Some owners have installed floor heating in their homes, but for some reasons, such as the master forgetting to turn off the main valve, the floor heating at home has been soaked in water for several hours, a day, or even several days. So, can the floor heating still be used if it is blistered? Does it have an impact?

Will the soaking of water affect the quality of underfloor heating and the energy consumption in the future? What to do if the floor heating is blistered? Do you want to ask the floor heating company to do it all over again?

This is a question that everyone is concerned about, and here the credit home decoration network will answer it for you.

Can the floor heating still be used if it is blistered? Does it have an impact?

If it is electric underfloor heating, it may have some effect. If it is water, the floor heating has no effect on the pipe, and it may have some impact on the insulation board. But it will take a long, long, long time for this effect to be felt.

The floor heating pipeline itself is not afraid of water, and large-scale water immersion mainly affects the wooden floor and wall water absorption, which may lead to damage or even scrapping of the floor, and the wall water absorption will lead to grassroots putty.

Bulging and falling off.

What to do if the floor heating is blistered?

1. Determine the amount of soaking water first, if the amount of soaking water is not large, open floor heating and open windows for ventilation. Allow to dry naturally;

2. If it is electric geothermal, please cut off the power supply first, disassemble the floor from the long side, and put the removed floor in a tic-tac-toe shape, and the moisture content of the ground and wooden floor.

It can be reinstalled before it reaches the level of soaking in water;

3. If it is water floor heating, the water temperature is now lowered, and the water temperature is adjusted to 55 degrees Celsius after the floor is disassembled.

Left and right, dry the ground, if the ground can't be dried, you can lay a film on the floor heating, the water will think of water droplets on the film, and then take the mulch film away, and then spread it back to the floor.

Ground soaking will not have an impact on the use of floor heating, but you need to clean the ground as soon as possible, if the water is placed for too long to penetrate under the ground, there is a problem, because the floor heating pipe is laid on the benzene board, if the benzene board is deformed, the ground is easy to crack.

Basically, no、Take graphene floor heating as an example,The following is a thermal insulation board、Water will evaporate!

The water in the underfloor heating can be used sooner or later. The reason is to ensure the safety of boilers and heating systems.

Operation, the heating department adds anti-corrosion and anti-scale softening water treatment agents to the system water to remove the rust in the boiler and prevent the boiler and heating system from clogging and bursting. This type of agent is highly corrosive due to the alkaline substances contained in its composition. Once the human body comes into contact with the code finch, it will also produce strong corrosion, which will damage the human body and be harmful to health.

Water in underfloor heating cannot be used. The reason is that in order to ensure the safe operation of the boiler and heating system, the heating department adds anti-corrosion and anti-scale softening water treatment agents to the system water to remove the rust in the boiler and prevent the boiler and heating system from clogging and bursting. This type of agent is highly corrosive due to the alkaline substances contained in its composition.

Once the human body is in contact, it will also produce strong corrosion, which will damage the human body and be harmful to health. Payson.

The floor heating floor is soaked in water. There will be no impact on the use of underfloor heating.

Does the floor heating have an effect on water heat? Hello, I'm glad to answer for you<> I have little effect on floor heating. Superwater heat is a name for household heat exchanger, also known as heating water heater, and is also another name for heating heat exchanger.

Superwater heat is used in household and industry, is a kind of water heater that does not use gas, electricity, and solar energy, and is a low-carbon, environmentally friendly and energy-saving device that uses the heat of the heating loop to heat tap water, with built-in high-efficiency heat exchange tubes, and the hot water generated can be used for the whole family to bathe, wash, wash, wash vegetables, wash dishes, and so on. It is the most ideal product for modern homes and units to heat and provide daily hot water in winter. The super-water heater is installed in the first two groups of heaters, and at the same time, it will not affect the heating temperature of other radiators; If it is installed at the end, the water temperature should be 10 20 lower than the inlet water temperature, so that the use effect will not be achieved.

Affect the heating of other households: the heating of the building is basically in series; Due to the high efficiency of heat exchange, the outlet of the primary heat source is basically blue and cool during the use of water heat. Because the floor heating is mostly made of plastic, but in the process of use, the long-term water is too hot, which will cause the pipe to soften, deform, and twist, resulting in poor water flow, and ultimately affect the service life.

Therefore, the temperature of the floor heating water does not exceed 45 degrees Celsius, and its wide laying area corresponds to a large heat dissipation area, as long as it is continuous heating, the indoor temperature will be very high. Extended material: I hope mine can help you <>

Do you have any other questions?

The electric floor heating that has been paved with floor tiles has been blistered, does it have any effect?

If it is electric underfloor heating, it may have some effect. If it is water, the floor heating has no effect on the pipe, and it may have some impact on the insulation board. But it will take a long, long, long time for this influence to be realized.

The floor heating pipeline itself is not afraid of water, and the large-scale immersion mainly affects the water absorption of the wooden floor and the wall, which may lead to damage or even scrapping of the floor, and the water absorption on the wall will cause the base putty to bulge and fall off. The electric floor heating that has been paved with floor tiles has been soaked by the hail, does it affect 1. First determine the amount of soaking water, if the amount of soaking water is not large, open the floor heating and open the window to breathe. Allow to dry naturally; 2. If it is electric geothermal, please cut off the power supply first, disassemble the floor from the long side, and put the removed floor in a tic-tac-toe shape, and the moisture content of the ground and wooden floor can be reinstalled before soaking in water; 3. If it is a water floor heating sail, now the water temperature is lowered, after the floor is disassembled, the water temperature is adjusted to about 55 degrees Celsius, and the ground is dried.

It is useful to put water all the time for underfloor heating.

1.Drain.

If you keep cold water in the floor heating at home, it is useful to put water, first exhaust first, then cold water, and finally hot water. Faster heating is possible. However, it is not good to blindly drain the orange tree, and it may be caused by too much debris or scale in the floor heating pipes.

2.Don't drain blindly.

If the floor heating pipe is not hot, there is no problem with the water, it is no problem to put water at the beginning of the winter warm, but it is not good to start waterproof when it is not hot, and the pipe of the floor heating is hot, and it is not good to release water all the time.

Water floor heating is mainly composed of heat source equipment, main pipes, water collectors, floor heating coils, and thermostats. It provides hot water with a temperature of no higher than 60 through the heat source equipment, evenly distributes the hot water of the system to each branch under the action of the manifold, circulates in the floor heating pipe, and then realizes redistribution through the action of the water pump hydraulics, so as to heat the entire ground and bring users a warm indoor experience.

Generally speaking, in every link of the water and floor heating work, there is no radiation, pollutants and other substances harmful to the human body, not only no harm, but also can bring comfortable heating effect, very humane.

The maintainability of floor heating is poor, because floor heating is a hidden project and is not easy to maintain, so it is necessary to choose high-tech environmental protection pipes with good pressure resistance, temperature resistance, corrosion resistance and good thermal stability when decorating. And it is not convenient for the secondary decoration, because the floor heating pipes are laid underground, when the ground is renovated for the second time, it is easy to damage the underground pipeline floor heating system after 2-4 years of operation, the floor heating pipeline is easy to produce scale, and professional equipment is needed to clean it, otherwise it will directly affect the heating effect.

Summary. Hello, you can use floor heating after soaking in water for a year, as long as it has been dried in the shade.

Hello, you can use floor heating after soaking in water for a year, as long as it has been dried in the shade.

If the wooden floor is soaked and the water is too much to handle, the surface water on the wooden floor should be sucked dry in the shortest possible time. At the same time, take a vacuum cleaner to absorb water vapor in the gap between the tease and splicing of the soaked wooden floor, or use a hair dryer to dry it with cold air, but do not use hot air to prevent the surface from drying and cracking due to heat and drying. If it is a large area of soaking water, the after-sales service office of the wooden floor should be notified in time, and the wooden floor should be carefully pried up under the condition of keeping the wooden floor not deformed, and placed in the ventilation place to dry according to the "well" shape, and use the weight generated by its stacking to prevent the occurrence of deformation.