How to speed up the heating cycle of floor heating, and how long can floor heating be circulated

Floor heating to speed up the heating cycle requires the installation of a circulating water pump, the only way to speed up the water circulation.

It depends. Usually, the underfloor heating does not exceed 24 hours, and it can be cycled up like a cavity. When the room temperature is 5 degrees, if the floor is a tile floor, the floor heating needs to be circulated for 3-4 hours, which can make the porcelain floor have a temperature; If the floor is a solid wood floor, the floor heating needs to be cycled for 16-24 hours to make the wood floor warm.

It is recommended to use it for the first time, the heating needs to be gradual, and the water temperature cannot be set very high, which will affect the life of the floor.

Introduction to floor heating: Floor heating is the abbreviation of floor radiant heating, which is to talk about the entire ground as a radiator, through the heat medium in the floor radiation layer, evenly heat the entire ground, and heat supply to the room through the ground in the form of radiation and convection heat transfer, so as to achieve the purpose of comfortable heating. According to different heat transfer media, it is divided into two categories: water floor heating and electric floor heating, and according to different pavement structures, the slag core is mainly divided into dry floor heating and wet floor heating.

Hello! We're happy to answer for you! Floor heating consists of three parts, namely heating, heat dissipation, and connecting to the pipeline heating system.

When the water reaches the corresponding temperature, the water expands into the heat dissipation system through the connecting pipe, and when it flows in the heat dissipation system, it will slowly cool and bend, and then flow into the heating system, and the repeated circulation constitutes the geothermal heating system. Floor heating cycle is the use of the heating boiler inlet and outlet water pressure gap, after the boiling, let the water pump to the heating pipe, and then leave it in the radiator of each family, if the radiator at home is not hot, you need to check whether the heating pipe valve is open, whether the internal heating pipe is normal and so on. The wall-hung boiler and the floor heating are a simple overall circulation system, the wall-hung boiler heats the water by the circulating pump to pump the hot water into the floor heating, and then presses the water from the floor heating back to the wall-hung boiler for heating.

I hope mine is helpful to you! Please give a thumbs up! Thanks!

Have a great day

1. How to make the heating circulating.

Check the heating system first to see if there is a blockage, you can use your hands to touch the heating pipe to judge, the pipe is not hot is caused by the blockage, and it needs to be dredged or vented. If it is caused by the careful grinding of scale and the accumulation of sediment, it is necessary to ask professional dredging personnel to repair it; If there is only gas in the pipe, open the exhaust valve on the radiator and discharge the gas to circulate it.

Second, how to ensure the heat of the heating.

1. Exhaust gas from heating water separator.

When using heating, it is inevitable to encounter the problem of floor heating is not hot, at this time it is not necessarily the problem of heating station, the filial piety should start from their own home, exhaust their own heating water separator to see, whether it can become hot, exhaust each group of pipelines on the heating in turn, and then close the exhaust valve after all the exhaust, and then open the main valve of the return water, and see if the temperature has risen after more than an hour.

2. Check the filter screen of the heating pipeline.

Generally, when encountering the problem of floor heating is not hot, you can first ask the neighbor whether the heating is normal, if it is normal, there are many public heating problems, which are very likely to be caused by the blockage of the filter screen, and the main valve of the water inlet and return water needs to be closed, and the filter screen can be removed and cleaned to solve it. 3. Install a hot water circulating pump.

According to Qeeka Home experts, many high-rise residents are prone to floor heating is not hot, which is very normal, because of the high location and slow backwater.

The floor heating is composed of three parts, which are heating, heat dissipation, and connecting the pipeline heating system. When the water reaches the corresponding temperature, the water expands into the heat dissipation system through the connecting pipe, and when it flows in the heat dissipation system, it will be slowly cooled, and then flow into the heating system.

1. Increase the diameter of the pipeline to match the interface diameter of the radiator.

2. Change the model of the manifold fiber, reduce the use of 90° elbows, and use more 45° elbows.

3. The use of power The circulating pump with the head matched with the heating system is not conducive to heat dissipation if the power is too large or too small.

4. Install a filter screen to reduce the impurities of the heating water and clean it regularly.

Do not drain the water from the radiators and pipes as well after the heating has been stopped. For the vast majority of radiators, full water maintenance is required, so the inlet and return valves of the radiator must be closed when the heating is stopped, which is crucial to prolong the service life of the radiator.

There are several ways to strengthen the heating cycle:

1. The heating installation method is divided into natural circulation installation method, heating circulation pump method, and automatic pump circulation installation method.

2. The natural circulation installation method can completely rely on the natural circulation method to achieve the heating effect.

3. The method of increasing the heating circulation pump is to install the heating circulation pump at the outlet of the water supply pipeline on the basis of the installation of natural circulation, so as to achieve a good circulation.

4. Summary: Adapt measures to local conditions and choose the most suitable method for yourself according to your own situation.

5. On the basis of natural circulation, Jingdong can install an automatic circulation pump, and a fully automatic pump can be installed at the outlet of the water supply pipeline to achieve a better circulation effect.