Does installing floor heating at home have an impact on floor tiles?

There will be an impact. The ground temperature is high, which will make the moisture in the cement mortar dissipate too quickly, thereby affecting the bonding effectiveness of the cement mortar, and the floor tiles are paved on the floor heating surface layer, and the sprinkling and maintenance work needs to be done to prevent the moisture in the cement mortar from being dissipated too quickly.

The material suitable for underfloor heating must be able to withstand temperatures above 25 degrees, and the floor tiles are fired at high temperatures, so they can withstand temperatures of more than 20 degrees, so they will not be affected.

Floor heating has no effect on floor tiles, floor heating is to heat the cement under the floor tiles first, and then dissipate the heat through the cement to the floor tiles indoors.

Underfloor heating floors are used for dry environments for a long time. The thicker the floor, the greater the probability of deformation and cracking of the skin, resulting in worse heating effect. Understand the teacher's suggestion, when the floor heating system is heated for the first time after the completion of the floor heating, the basic ground should be heated to 25 first, and then the temperature should be constant for 12-24 hours.

Finally, slowly ramp up the temperature to the desired temperature at a rate of 1 hour, and don't suddenly set it too high. Rapid heating in a short time, the higher the heating temperature, the greater the heat loss, which not only affects the life of the thermal system, but also leads to the deformation of floor heating. After the floor heating is laid, it will involve the secondary leveling of the ground, which cannot be too thick or too thin.

If it is too thick, it will affect the heating effect. If it is too thin, the ground may be hollowed out and cracked, and it will also cause problems with spatial differences.

Because each bricklayer has different requirements for tiles, they are all constructed according to the actual situation of the space, some may require a drop, and some are 3cm. Also, depending on the tiles, marble or floors that the owner buys, the thickness of these materials is different, and the drop is also different. If the living room is a floor tile or room floor, the height of the floor should be increased accordingly, and the floor should be about three centimeters.

Therefore, it is necessary to communicate well in advance when laying floor heating. Leveling with floor tiles is basically to cover the pipe, that is, to cover the pipe. If the floor heating pipe is level, it must be more than three centimeters.

Normal. Let's stick the bricks of the above thickness. Starting from this insulation board, it is two centimeters plus this pipe is, equal, plus this centimeter leveling, plus the lime sand layer, the thickness of the floor tiles is basically eight to ten centimeters.

That is, under normal as-built conditions, the completion is within eight to ten centimeters.

Although these dimensions are professional, the owner should know more about them in advance, so there is no doubt about the later construction, which will avoid some risks. The space of the balcony, kitchen, and bathroom should be deducted. Generally, these two spaces do not do underfloor heating, but a few people do.

There are several cases of underfloor heating in the kitchen. The kitchen area is relatively large, and underfloor heating will be considered. The kitchen may be open.

But usually, there may be some vegetables in the kitchen. If you have warm vegetables, they will not last long and will spoil quickly after a few days. This is a significant drawback.

There was also balcony space. If it is closed and there is a sliding door, it is generally not done. Balcony space is done less, as it also involves energy consumption.

Some people can make toilets, but they should pay attention to waterproofing during construction. Generally, it is necessary to waterproof for the second time, water and electricity for the first time, and floor heating for the second time. Floor heating needs to be discounted on the basis of the internal area of the suite, about 70%, 120 square meters of houses, the area is between 75-80 square meters, and the area of the floor cabinet with cabinets in the room should be deducted.

One square meter**13140, but different materials** are different. For example, the pipe is domestic, imported, ordinary, and can be chosen according to your budget.

Yes, so people generally choose wooden flooring when decorating, so that the heat permeability effect is better.

It will definitely be affected, so you must not choose too thick materials when installing floor tiles.

No. Because the floor tiles will not affect the heating effect, and the heat dissipation of the floor tiles will be very uniform, so the floor tiles are the best choice.

The floor tiles are of standard thickness, and a little thicker will not affect the heating effect, but not too thin. Very thin floors are used for a long time, and underfloor heating will bake cracks in the floor of the home.

The renovated house should not be detrimental to the installation of water floor heating or heating cable electric floor heating, because both types of floor heating need to be carried out at the same time when the new house is renovated. After the decoration of the new house, radiator heating will generally be installed, and the surface-mounted installation method is adopted, and the radiator heating is much higher than the air conditioning heating in terms of heating effect and comfort.

The low-temperature floor heat medium forms a gradually decreasing temperature gradient from the soles of the feet to the head indoors, thus giving people the comfort of warm feet and cool heads. Radiant floor heating is in line with fitness theory, is the most comfortable way to heat, and is also a symbol of modern quality of life.

It is divided into two categories: water floor heating and electric floor heating from the thermal medium quality, and is divided into wet floor heating and dry floor heating from the pavement structure. From the surface decoration material, it is divided into floor type floor heating and floor tile type floor heating; Functionally, it is divided into ordinary floor heating and far-infrared floor heating.

The floor tiles that have been renovated cannot be directly installed with floor heating. The decoration of the floor tiles want to install floor heating, which is a very troublesome thing for a sail branch to collapse, because if you really want to install it, you need to knock off all the sail floors, which is very troublesome, and it needs to be vacant for a period of time before you can move in.

Yes, there is a kind of electric floor heating, called electric heating film, which itself is only 1-2mm, and the thermal insulation layer is less than one centimeter.

It is possible to add auxiliary floor heating to the renovated ground, but the premise is that the floor height is enough, and the second is that the heat source should be clear. Otherwise, it won't help you.

Floor heating is generally installed before the floor tiles are laid.

Yes! But it still needs centimeters of space.

The floor heating room really doesn't dare to lay tiles

The floor heating room really doesn't dare to lay tiles, it's just a rumor on the Internet, don't believe it. Because there are still a lot of people who use tiles for floor heating, there are many advantages of using tiles for floor heating. Under normal circumstances, there is no harm in using tiles for floor heating, which may be due to the following two reasons:

1. The surface of the tile is very smooth, once the tile is stained with water, it is easier to fall, especially in the family with the elderly and children, and the floor heating should be especially careful when walking after laying tiles.

2. The thermal conductivity of non-thermal insulation tiles is very fast, and the heat dissipation is also very fast, and the thermal insulation effect is poor. Generally speaking, when the floor heating is not turned on, the tiled room will be colder than the room with wooden floors, and the floor heating is turned on, although the tiles heat up quickly, but the heat dissipation is also fast after being turned off, and it is not insulated, so many people don't like it.

What are the pros and cons of using tiles in floor heating rooms

1. The moisture content of ceramic tiles with good stability is low, so it has good stability, and there is no need to worry about heating deformation. And the tiles will not be moldy, and the moisture resistance is better. Compared with ceramic tiles, the stability of wood flooring is poor, and the repeated changes in the cold and heat of the external space will directly cause changes in the moisture content of the wood floor, resulting in the situation of the floor being warped.

2. Good thermal conductivity The thermal conductivity of ceramic tiles is good, and it can be heated and dissipated in a short time after the floor heating is turned on, but the thermal insulation of tiles is poor, and the performance of wooden floors is better in this regard.

3. **More affordable wood flooring** varies greatly according to the different materials, if the floor heating is installed at home, then the material requirements for wood flooring will be higher. The wooden floor is not only high, but also has a lot of labor costs for laying. Ceramic tiles are much more affordable, even high-quality tiles are cheaper than wooden floors.

4, environmental protection is better, many people are questioning the radiation of the ceramic tile after heating, in fact, there is no need to worry about this aspect at all, the tile is fired at ultra-high temperature, the temperature of the floor heating will not destroy its structure at all, and the radiation of the tile will not cause harm to the human body. If you lay wooden flooring, you need to pay more attention to the choice of material, general wooden flooring will release formaldehyde after heating, affecting the health of the occupants.

For the floor heating room really dare not lay tiles and floor heating room what are the pros and cons of the use of ceramic tiles in the two issues of some introduction, I first wrote here, I hope that through the above introduction can help you choose the question of whether you should choose tiles or wooden floors after laying floor heating, in fact, after laying floor heating can lay tiles, compared to wooden floors ceramic tiles are more suitable.

Nowadays, people's living standards have improved a lot compared with the past, so that people's requirements for home decoration have gradually paid attention to them, and they are more in pursuit of environmental protection, health and comfortable home life. Therefore, in recent years, underfloor heating has become an indispensable heating tool in the northern region. ButThe floor heating room really doesn't dare to lay tilesIs it?

Let's take a look.

1. Heat retention.

A lot of people have been wonderingThe floor heating room really doesn't dare to lay tilesExperts believe that in terms of heat dissipation, the heat dissipation of wood flooring is not as good as that of ceramic tiles. However, the thermal insulation of the wooden floor will be much stronger than that of the tile, but the tile rental can usually reach the required heat faster; At the same temperature, if the underfloor heating is turned off, the heat of the room with wooden floors can be maintained for a longer time. Wu Fu.

2. Environmental protection.

Although many of today's solid wood floors are very environmentally friendly, solid wood floors are not the most suitable for floor heating floors, and composite wood floors more or less contain a certain amount of formaldehyde, which will accelerate the release of formaldehyde when heated by heating, causing many consumers to be more worried. Ceramic tiles have natural radioactivity, but the tiles are fired at a constant temperature of 1200, and the radioactivity of the tiles will not increase due to heating for floor heating, and the tiles that meet the national standards will not cause harm to consumers.

3. Comfort.

The wooden floor not only has a natural texture and beautiful color, but also is very comfortable in terms of foot feeling, bringing people a warm sense of comfort. Therefore, it is widely liked by people. But the tile is different, its texture is relatively hard, and it looks cold.

So, forThe floor heating room really doesn't dare to lay tilesIs it? Many people will abandon tiles and choose to lay wooden floors for their living rooms. Of course, it does not mean that the tiles are completely bad, and the vitrified tiles on the market are still more suitable for everyone.

4. Stability.

No matter what kind of wood floor, there is a certain probability of deformation, especially after heating, there may be deformation, warping and other phenomena, so it is not suitable for geothermal flooring. However, ceramic tiles are much more stable than wooden floors. It is not deformed after high temperature heating, and has good stability.

If you still want to choose to lay wood floors for floor heating, it is recommended that you choose multi-layer parquet flooring, which is stable and not easy to deform.

My conclusion: That's rightThe floor heating room really doesn't dare to lay tilesIn fact, I can only say that each has its own good and bad, we all know that there are many types of flooring and tiles, and there are some materials that are suitable, and you need to choose carefully. However, the choice of flooring on the floor heating must meet the requirements, or it will not be counterproductive.