The toner rubs the face with white powder that can t be wiped off

There may be several reasons why the white powder on your face cannot be wiped off after using toner:

1.**Cleaning is not in place, and the toner hits the face with **debris, resulting in white foam. It is advisable to pay attention to the cleanliness of the face, use some exfoliating products to cleanse the face thoroughly or choose a toner with pure ingredients.

2.The toner has a high chemical composition, and it cannot be absorbed, resulting in white foam. It is recommended to stop using it for a period of time, and after ** natural recovery, replace it with a relatively pure toner with less chemical ingredients for skin care and hydration.

3.Some toners may contain alcohol, which is volatile, and after applying the toner, the alcohol volatilization will leave a white powder attached to the surface. These white powders generally disappear naturally over time and can also be removed with cleansing** or exfoliating products.

4.Toners may contain surfactants, which can cause foaming and foaming. If foaming is severe and lasts for a long time, it is recommended to stop using the product, change to another brand or consult a doctor.

The above are the reasons why the toner can't wipe off the white powder on the face and the corresponding solutions, you can adjust it according to the situation to improve this phenomenon.

A professional one for you.

The first situation is that your cleaning is not in place, and the water rubs against the debris on the ** and foams.

The second situation is that your water chemistry is very high, and you can't absorb it, and foam forms on the surface.

In order to dissolve the fragrance and some oil-soluble ingredients in it and maintain a transparent appearance, it is necessary to add surface active ingredients, and some negative factors brought by this ingredient are that when you shake the lotion hard, there will be a layer of foam on the surface of the water after stopping, and the greater the force, the longer the shake, the more foam. When you use lotion, the process of applying is as if you are shaking the water hard, so it will produce some small foam on the surface, which can usually be avoided by patting water with a cotton pad.

The third situation is that your water is not pure enough (such as the water bought on the Internet, pure water or other liquids), which leads to the formation of dirt on the ** on the ** can not be absorbed. Growing up will clog pores.

In order to solubilize the flavor in the product, because most of the flavor is insoluble in water, it can be dissolved in water after solubilization, so that the product has a pleasant smell;

In order to solubilize other substances that are insoluble or insoluble in water, such as essential oils, so that the product has a special smell or highlights the efficacy of essential oils.

The denser the water, the more likely it is to have skin care products that are better absorbed.

Your toner is whitening, and the toner I use also has white foam, as long as it is a regular manufacturer's product, it is fine.

This is due to some of the surfactants in the toner.

1. Usually the toner is not completely composed of water-soluble substances, in order to dissolve the fragrance and some oil-soluble ingredients in it and maintain a transparent appearance, it is necessary to add surface active ingredients, and some negative factors brought by this ingredient are that when you shake the toner hard, there will be a layer of foam on the surface of the water after stopping, and the greater the force, the longer the shaking time, the more foam, usually this situation can be avoided by patting water with a cotton pad.

2. As for whether these foams have an impact on **, it also depends on the specific product, some ingredients will hurt **, but some are foams produced because of some protein ingredients in the toner. Egg whites are also a surfactant, just like eggs that are whipped for a long time, and foam will also form on the surface.